Robot cells & complete lines, custom designed for electric weld assembly of steel - sheet components & parts for automobile car-bodies, household appliances, metal furniture, steel doors, semitrailer's frame, railway vehicles.
Customized robot cells
Full-comprehensive productive solutions with high-reliability components and units, carefully selected and checked for quality over more than 20 years extremely positive experience .
Regular wodden crates, suitable to be included in container for oversea shipments
Casting and steel manifolds connect exhaust output from
engine head to exhaust pipe channelling the exhaust gases
towards the emissions reduction and silencing systems.
We manufacture our products with the highest quality and
certified types of cast iron and steel to guarantee the best
performance in heat resistance and thermal stock.
Our latest range extension is for turbocharger applications
that require top quality materials and machining.
We provide our quality products complete with fitting
kit to guarantee the proper assembly and an excellent
performance of the exhaust system.
Catalysts design is specific for each application and all
our maniverters are ECE 103R type-approved according to
European emissions standards and regulations.
Torsional Vibration Dampers (TVD)
CORA TVD's stand high loads as our premium
quality rubber compounds maximize their damping properties.
Decoupled Dampers or DDS (Double Damping System Dampers)
Decouplers are made up of a TVD assembled with a torsional coupling, so-called
â??isolatorâ??. DDS special design helps to eliminate crankshaft vibrations at low
the frequency through the crankshaft isolator rubber while the TVD reduces the
torsional vibrations at high frequency inside the crankshaft.
Viscous Dampers
In VISCOUS dampers, the viscous oil layer placed between the inertia ring and pulley
body runs the energy dissipation and converts it into heat. This technology can
dampen a wide range of crankshaft natural frequencies from different orders.
We hold two patents on innovative construction solutions for viscous dampers.
- Wires: a wide range of unipolar wires is used in products. Section goes from 0,09 mm2 to 50 mm2 and they are made of several materials like PVC, Teflon, AWG according to the UL-CSA, silicone with or without glass tubing.
- Probes: temperature probes, Reeds or Hall effect wired probes or any kind of required wrapper like threaded bulbs, perforated bulbs, steel, brass, plastic bulbs, die-cast bulbs. The Company can also work on wrappers designed for a dedicated mould.
- Power cables: the production also includes power cables with die-cast plugs/sockets of different types: Italy, Schuko, UK, IEC, Australia.
- Cables: wirings with multipolar shielded and shieldless cables, for applications like data transmission, power and dynamic uses; standard wirings like Fror, PVC, LIYY, Silicone, Neoprene or custom-made wirings, according to particular applications
.
- Panelboards, according to customer’s plan.
The battery chargers of the cemb-easy 3000
Series are designed to recharge medium capacity
Traction and start lead-acid batteries and are
O the directive on electomagnetic
Compatibility and ce marking.
• option: custom-made colour
• custom-made logo and silk-screen printing
• complete with mains and battery cables; assembly of plugs and battery connectors
On request.
Technical characteristics easy 3000:
• 230v - 50hz one phase supply, (with possibility to request voltages different from
The standard ones), adjustable to ± 5% or ± 10%
• electronic control provided with final charge timer
• on-off switch
• rectifier bridge with silicon diodes, natural cooling, with snubber protection and
Gemov
• tropicalized stray-flux transformer : tenvex copper windings with double enamel
Insulation; class h; impregnated in autoclave with ecological epoxy resins.
• 12/10 sheet steel case provided with electrical bondings and ergonomic handle
• epoxy powder coating, oven-baked
• standard colour: ral2002 red
• new lexan plate with charging data very easy to understand
• lab-tested electronic circuit conforming to the directive on electomagnetic
Compatibility and ce marking.
• option: custom-made colour
• custom-made logo and silk-screen printing
• complete with mains and battery cables; assembly of plugs and battery connectors
On request.
• charge at decreasing current with intervention of the final charge
At 2.40 v/cell
• final charge with timed control 9h / 11h
• fixed charging time (equalization charge excluded)
• equalization charge (week-end charge) to be recalled. It will start after 55’ from
Charge end
• duration of equalized charging phase: each hour 5’ (repeated for 48 hours)
• calculation to determine the size of suitable battery charge: 16a for every 100
Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
r control is designed to
Optimize the charging cycles for any type of battery, 230v coil single-pole contactor,
D.C. Fuse on rectifier output, delta-star stray flux single-phase power transformer
Class h; impregnated in autoclave with ecological epoxy resins, with thermocouples
For disconnection due to maximum temperature, single-phase rectifier bridge with
Silicon diodes, natural cooling, with snubber protection, mains input and d.C. Output
Polarized cables, modular installation on galvanized steel base, sheet steel case with
Modular panels so as to assure maximum accessibility in case of service, epoxy
Powder coating, oven-baked, standard colour: ral 2002 red, new lexan plate with
Charging data very easy to understand, equalized recall push button, on - off push
Button, option to adjust the charging time from 90 to 210 minutes, option to adjust
The threshold voltage from 2.3 to 2.4 v/cell., equalization charge timed, led signaling
Charging phases or result, short check of functions and times, option to program
The equalized charge automatically, lab-tested electronic circuit conforming to the
Directive on electromagnetic compatibility and ce marking, automatic disconnection
Of battery charger due to battery disconnection, option: custom-made color, logo and
Silk-screen printing, option: assembly of plugs and battery connectors on request.
Attery charger due to battery
Disconnection, smart charging system according to the discharge level of the battery,
Short check of functions and times, option: custom-made colour and custom-made
Logo and silk-screen printing, final acceptance test conforming to safety regulations,
Charging with decreasing current (wa characteristic): 9÷11 h charging time, charging
With decreasing current (wo - wa characteristic): 7÷8 h charging time, complete
With mains and battery cables; assembly of plugs and battery connectors on request.
Wa (din 41774):
Charge at decreasing current with intervention of the
Final charge at 2.40 v/cell, final charge with timed
Control 9h / 11h, fixed charging time (equalization
Charge excluded), equalization charge (week-end
Charge) to be recalled. It will start after 55’ from
Charge end, duration of equalized charging phase:
Each hour 5’ (repeated for 48 hours), calculation to
Determine the size of suitable battery charge: 16a
For every 100 ah of the battery (e.G. 500 ah battery:
16ax5 = 80a).
Wo-wa:
Charge at decreasing current with intervention of the
Final charge at 2.42 v/cell, final charge with timed
Control 7h / 8h, fixed charging time (equalization
Charge excluded), equalization charge (week-end
With decreasing
Current (wa characteristic): 9÷11 h charging time, transformer thermal protection,
Modular installation on galvanized steel base (20/10) – (30/10), sheet steel case
With modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, ovenbaked,
Standard colour: ral 2002 red, option: custom-made colour, logo and silkscreen
Printing, mains input and d.C. Output polarized cables, complete with mains
And battery cables; assembly of plugs and battery connectors on request.
“wa” characteristic (din 41774):
Charge at decreasing current with intervention of the final charge at
2.40 v/cell., final charge with timed control 9h / 11h, fixed charging
Time (equalization charge excluded), equalization charge (week-end
Charge) to be recalled. It will start after 55’ from charge end, duration
Of equalized charging phase: each hour 5’ (repeated for 48 hours),
Calculation to determine the size of suitable battery charge: 16a for
Every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
Icroprocessor control is
Designed to optimize the charging cycles for any type of battery, single mains input
Fuses, auxiliary transformer suitable for the supply voltage, d.C. Fuse on rectifier output,
Delta-star stray flux single-phase power transformer, tenvex copper windings with
Double enamel insulation; class h; impregnated in autoclave with ecological epoxy
Resins, with thermocouples for disconnection due to maximum temperature, singlephase
Rectifier bridge with silicon diodes, natural cooling, with snubber protection,
Mains input and d.C. Output polarized cables, modular installation on galvanized
Steel base (type a: 20/10, type b :30/10), sheet steel case with modular panels
So as to assure maximum accessibility in case of service (type a : 10/10 - 12/10,
Type b : 12/10 – 15/10), epoxy powder coating, oven-baked, standard color: ral
2002 red, lab-tested electronic circuit conforming to the directive on electromagnetic
Compatibility and ce marking, equalization charge timed, automatic start, automatic
Disconnection of battery charger due to battery disconnection, smart charging system
According to the discharge level of the battery, short check of functions and times,
Option: custom-made colour and custom-made logo and silk-screen printing, final
Acceptance test conforming to safety regulations, charging with decreasing current
(wa characteristic): 9÷11 h charging time, charging with decreasing current (wo -
Wa characteristic): 7÷8 h charging time, complete with mains and battery cables;
Assembly of plugs and battery connectors on request.
Ptek nre3 three phase is designed to recharge medium - large capacity traction
And start lead-acid batteries, developed using our forty-year experience in the field
Of battery chargers and multi-years application of microprocessor control systems
D electronic circuit conforming to the
Directive on electromagnetic compatibility and ce marking, automatic disconnection
Of battery charger due to battery disconnection, equalization charge based on
Time, charging with decreasing current (wa characteristic):9÷11 h charging time,
Transformer thermal protection, modular installation on galvanized steel base, sheet
Steel case with modular panels, epoxy powder coating, oven-baked, standard color:
Ral 5003 blue, option: custom-made color, logo and silk-screen printing, mains
Input and d.C. Output polarized cables, complete with mains and battery cables;
Assembly of plugs and battery connectors on request.
“wa” characteristic (din 41774):
Charge at decreasing current with intervention of adjustable final
Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h /
11h, fixed charging time (equalization charge excluded), equalization
Charge (week-end charge). It will start after 55’ from charge end,
Duration of equalized charging phase: each hour 5’ (repeated for 48
Hours), calculation to determine the size of suitable battery charge:
16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 =
80a).
Ptek tc3 three phase is designed to recharge medium - large capacity traction and
Start lead-acid batteries, developed using our forty-year experience in the field of
, three-phase rectifier
Bridge with silicon diodes, natural cooling, with snubber protection, mains input and
D.C. Output polarized cables, modular installation on galvanized steel base, sheet
Steel case with modular panels so as to assure maximum accessibility in case of
Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new
Lexan plate with charging data very easy to understand, equalized recall push
Button, on - off push button, option to adjust the charging time from 90 to 210
Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization
Charge timed, led signaling charging phases or result, short check of functions and
Times, option to program the equalized charge automatically, lab-tested electronic
Circuit conforming to the directive on electromagnetic compatibility and ce marking,
Automatic disconnection of battery charger due to battery disconnection, option:
Custom-made color, logo and silk-screen printing, option: assembly of plugs and
Battery connectors on request.
Charge at decreasing current with intervention of the final charge
At 2.40 v/cell, final charge with timed control 9h / 11h, fixed
Charging time (equalization charge excluded), equalization
Charge (week-end charge) to be recalled. It will start after 55’
From charge end, duration of equalized charging phase: each
Hour 5’ (repeated for 48 hours), calculation to determine the size
Of suitable battery charge: 16a for every 100 ah of the battery
(e.G. 500 ah battery: 16ax5 = 80a).
Ptek nr3 three phase is designed to recharge medium - large capacity traction and
Start lead-acid batteries, developed using our forty-year experience in the field of
Battery chargers and multi-years application of microprocessor control systems which
On, short check of functions and
Times, option to program the equalized charge automatically, lab tested electronic
Circuit conforming to the directive on electromagnetic compatibility and ce marking,
Automatic disconnection of battery charger due to battery disconnection, equalization
Charge based on time, charging with decreasing current (wa characteristic): 9÷11
H charging time, transformer thermal protection, modular installation on galvanized
Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked,
Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen
Printing, mains input and d.C. Output polarized cables, complete with mains and
Battery cables; assembly of plugs and battery connectors on request.
“wa” characteristic (din 41774):
Charge at decreasing current with intervention of adjustable final
Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h /
11h, fixed charging time (equalization charge excluded), equalization
Charge (week-end charge) to be recalled. It will start after 55’ from
Charge end, duration of equalized charging phase: each hour 5’
(repeated for 48 hours), calculation to determine the size of suitable
Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah
Battery: 16ax5 = 80a).
ier output, rectifier bridge
with snubber protection, short check of functions and times, option to program
the equalized charge automatically, lab tested electronic circuit conforming to
the directive on electromagnetic compatibility and CE marking, automatic Start,
automatic disconnection of battery charger due to battery disconnection, equalization
charge based on time, charging with decreasing current (Wa characteristic): 9÷11
h charging time, transformer thermal protection, modular installation on galvanized
steel base (20/10) – (30/10), sheet steel case with modular panels (10/10 - 12/10)
- (12/10 – 15/10), epoxy powder coating, oven-baked, standard colour: RAL 2002
red, option: custom-made colour, logo and silk-screen printing, mains input and d.c.
output polarized cables, complete with mains and battery cables; assembly of plugs
and battery connectors on request.
“WA” CHARACTERISTIC (DIN 41774):
charge at decreasing current with intervention of the final charge at
2.40 V/cell., final charge with timed control 9h / 11h, fixed charging
time (equalization charge excluded), equalization charge (week-end
charge) to be recalled. It will start after 55’ from charge end, duration
of equalized charging phase: each hour 5’ (repeated for 48 hours),
calculation to determine the size of suitable battery charge: 16A for
every 100 Ah of the battery (e.g. 500 Ah battery: 16Ax5 = 80A).
Pressure Seal Globe Valve Manufacturer
Europe is the largest Pressure Seal Globe Valve Manufacturer. The pressure seal valve applies sufficient force against the internal diameter of the valve body and the bonnet surfaces. When the pressure in the device rises, so does the stress on the pressure seal gasket.
A pressure seal globe valve is a valve design concept that offers distinct advantages over a conventional blasted body to hat fixing device. It employs the valve framework strain to provide adequate strength against the inside width of the valve body and the cap surfaces. As the framework pressure rises, so does the force on the pressing factor seal gasket. Pressure Seal Globe valves are commonly used in pipelines to control the flow of viscous fluids like gasoline. It is capable of monitoring both flow rate and on/off operations. Their name comes from their spherical body shape, which is divided into two parts by an internal baffle.
Description
Body materials Carbon steel, A105, F304, F316, F304L, F316L, F51, F53, F11, F22.
Class 150 2500.
Size 1 2 48
Ends Socket weld, butt weld, flanged, threaded.
Operation handwheel operated,
gear operated,
electric actuated,
pneumatic actuated.
Pressure seal globe valve is used in many industries like
Petrochemical Industry
Oil and Gas Industry
Power Industry
Chemical Industry
Uses for a pressure seal valve include
A pressure seal valve is used to handle high pressure in power generation. Two interchangeable spring loaded discs, a fully driven disc, and refining pins comprise the parallel slide gate assembly.
Pressure Seal Globe Valves Have the Following Benefits
Excellent ability to switch off and on.
Excellent throttling skills.
Shorter stroke length.
Seats are simple to resurface.
May be used as a check and stop valve.
Pressure Seal Globe Valves are used in a variety of applications
Water cooling systems.
Devices that use fuel oil.
Chemical or water based feed systems.
Key steam vents and drains, as well as the boiler.
Turbine lube oil device
27 Telecom Assemblies Suppliers
Short on time? Let Telecom Assemblies sellers contact you.
