We are one of the most distinguished providers of SG Iron Nipples. These products are fabricated using advance technology machines so as to ensure dependability in operation. The nipples offered by us facilitate in quick and easy installation Nipples of soft plastic and rubber hose.
We provide a varied range of top quality Stub Ends, which are highly acclaimed for outstanding finishing and smooth functioning. These products are the piping equipment that can be welded to change the direction of two pipes to enable the flow of fluids in the piping system. Grade EN-GJS-400-18 EN-GJS-400-15 EN-GJS-450-10 EN-GJS-500-7 EN-GJS-600-3 EN-GJS-700-2 Tensile Strength N/mm2 400 400 450 500 600 700 0.2% Proof Stress N/mm2 250 250 310 320 370 420 Elongation (%) 18 15 10 7 3 2 Typical Hardness HB
Widely used for connecting the pipes to pipes or pipe to fittings, the Cast Iron Tee finds wide application in various industries. Manufactured using high grade cast iron, the Cast Iron Tee is widely acclaimed for its high qualities and excellent features. Grade EN-GJL-150 EN-GJL-200 EN-GJL-250 EN-GJL-300 Minimum Tensile Strength N/mm2 150 200 250 300 Maximum Tensile Strength N/mm2 250 300 350 400 Typical Hardness HB 10/300 (usual range) 150-183 159-194 180-222 200-280 BS 1452 1990 N/mm2 180 220 250 300 BS 1452 1961 12 14 17 20
Our clients can avail from us Ductile Iron Unions. Available grades with specifications are as follows: Grade EN-GJS-400-18 EN-GJS-400-15 EN-GJS-450-10 EN-GJS-500-7 EN-GJS-600-3 EN-GJS-700-2 Tensile Strength N/mm2 400 400 450 500 600 700 0.2% Proof Stress N/mm2 250 250 310 320 370 420 Elongation (%) 18 15 10 7 3 2 Typical Hardness HB
Designed in line with international quality standards, our range is leak proof and resistant to corrosion. Available in varied specifications, malleable elbows are extensively used in water supply pipe lines, industrial food processing pipeline and in various other fluid transfer piping systems. Features : ? Leak proof ? High strength ? Long service life ? Dimensional accuracy ? Corrosion resistance
Backed by our sophisticated facilities, we are engaged in manufacturing and offering a quality range of SG Iron Elbows. These are manufactured using optimum quality raw material in the process to ensure durability, rust proof, and high strength features. We can also offer these as per the specifications laid by our esteemed clients.
Kalyan steel center offers ductile iron flange, made of ductile iron in different ranges and forms those suit clients’ requirements. Kalyan steel center offer casting of flanges which are used in external and internal rib or rim to offer strength as the flange of an iron beam or I-beam. Grade EN-GJS-400-18 EN-GJS-400-15 EN-GJS-450-10 EN-GJS-500-7 EN-GJS-600-3 EN-GJS-700-2 Tensile Strength N/mm2 400 400 450 500 600 700 0.2% Proof Stress N/mm2 250 250 310 320 370 420 Elongation (%) 18 15 10 7 3 2 Typical Hardness HB
Banking on our rich technical expertise and knowledge, we have earned expertise in engineering Malleable Iron Nipples. These are offered by us in a variety of technical specifications and sizes to meet the diverse needs of our clients. Clients can buy these technically superior hollow bars from us at competitive prices.
The cast iron couplings provided by us, are used in various applications of cement industries, sugar mills, etc. Our cast iron couplings are high in demand amongst diverse industries, for their quality. The company is counted amidst the leading cast iron couplings manufacturers in India. Grade EN-GJL-150 EN-GJL-200 EN-GJL-250 EN-GJL-300 Minimum Tensile Strength N/mm2 150 200 250 300 Maximum Tensile Strength N/mm2 250 300 350 400 Typical Hardness HB 10/300 (usual range) 150-183 159-194 180-222 200-280 BS 1452 1990 N/mm2 180 220 250 300 BS 1452 1961 12 14 17 20
Ductile iron is equipped with numerous applications that have a wide range of components through which it can easily replace gray iron due to its high class properties. The usage of ductile iron in such application offers high strength and weight savings services.
We offer stub ends which is used to join pipes of different ODs. They ensure leak proof and simple installation. We offer steel union in many different sizes, grades and standards. These are manufactured in standard dimensions and can also be customized. Grade EN-GJL-150 EN-GJL-200 EN-GJL-250 EN-GJL-300 Minimum Tensile Strength N/mm2 150 200 250 300 Maximum Tensile Strength N/mm2 250 300 350 400 Typical Hardness HB 10/300 (usual range) 150-183 159-194 180-222 200-280 BS 1452 1990 N/mm2 180 220 250 300 BS 1452 1961 12 14 17 20
We are instrumental in bringing forth a durable range of Malleable Iron tees for our clients. Made using premium quality steel, our castings are further electro plated with iron to enhance their corrosion resistance, finish and durability. Furthermore, we have spring loaded folding steps available with us.
We are engaged in offering our clients a wide range of SG Iron tees which are manufactured from premium quality of cast iron and ductile iron. This entire range provides long functional life, high efficiency and corrosion resistance to our valuable clients.
Iron Ore: 64% Origin:Peru 35, 000 tons first and second month from the third month 70,000 - 100,000 tons. F.O.B We are looking for a final buyer for supply contract. (NOT INTERMEDIARIES)
A. Specification Product Quality Stainless Steel Wool fill fabric for home Material Stainless steel and poly fiber Weight Ranging from 2000gsm Size 4"*10m per roll or as requested Width 47"/48" Package Roll or Sheet B. Feature: 1. 100% non-toxic and environmentally safe 2. Easy to install due to its flexible, compressible nature, comes in rolls and can be cut to size or shape desired, stuff it in the hole, and you are done. 3. It is a permanent solution, will not rust or corrode over time, dose not shrink, stain, pull out. 4. Made of sharp durable fibers material which is suitable to die cut to specific shapes and sizes. 5.Most consistent material for exhaust applications with strength in all directions as cross-lapped material going at approximately 90 degree angles to other fibers. 6. Installs under landscaping and allows grass and small plants to grow through, thus being an invisible force against pests. C. Function 1. Fill fabric is an exclusion fabric used by professional nuisance control and pest control operators. 2. It is composed of stainless steel and poly fibers. This blend of materials gives it an extra â??spring backâ?�, allowing for easier fitting in crevices and the ability to stay in place well. Cut it 2-3 times the size of the opening to make a tight fit. 3. It is highly resilient and is an impenetrable barrier against rodents and pests. D. Application Burrowing animals such as rats, chipmunks, gophers, groundhogs and nutria can dig beneath the ground and ruin landscaping, chew through cables and destroy dikes and levees. Prevent these animals from wreaking havoc beneath the ground, currently protecting many public and private sites. E. Install Instructions 1. Install it by pressing it into rodent-prone crevices with gloved hands or simple tools like a putty knife or screwdriver. 2. Do not install it close to live electrical conductors, since stainless stell is an electrical conductor. Installing IT around fully sealed electrical conduit coming out of a wall is safe.
This is also one of our products from our Iron Ore and Pig Iron. Our quality control process ensures that it has a cascading effect in all the products at any stage of the production line. Our GI Coil is one of these hence it is highly resistant to weathering and metallic coating. Specification : Descriptions Thickness : 0.08 mm to 3.0 mm Width : 760 mm to 1335 mm Coating : 70 to 550 gsm Standards : IS 277, JIS G 3302, AS1397, EN 10326, EN 10327, ASTM A 653
Iron Ore is fourth most common mineral present in the earth’s crust. However, nearly 70% of the world’s produce comes from China, Brazil, Australia, Russia and India. We extract the ores from the earth’s crust, either process it and convert it to pig iron and pellets. Iron ore is the key raw material in the production of steel – one of the most popular, versatile and robust materials used today in most of the industrial products. Specification Descriptions Fe 56% to 57% SiO2 5.8% to 6.2% Al2O3 4.9% to 5.3% Moisture Content Upto 14% P Upto 0.07% S Upto 0.04%
Pig Iron is another one of the by-products of our iron ore mining process. Our pig iron ingots can be further processed to produce cast iron, wrought iron and steel. Specification : Descriptions C : 3.8% - 4.2% Si : 0.6% to 1.2% Mn : Upto 1% P : Upto 0.15% S : Upto 0.15%
Galvalume is one of our unique and specialized products that is best adapted for heating and ventilated consumptions. This is an enhanced galvanized iron product that has better corrosion resistance and longer life. Specification : Descriptions Thickness : 0.18 to 1.20 mm (BMT) Width : 760 to 1350 mm Standards : JIS G 3321, AS1397, EN 10215, EN 10215, ASTM A792 / A792M Coating : AZM 150 to AZM 210
I represent alsfem export ltda is an exporting and importing company which operates in the following titanium and iron ore (ilmenite) and other minerals. Our titanium and iron ore (ilmenite) has the equivalent of 48% to 52% titanium (tio2) and 28-31% iron (fe). We have the amount 90, 000 tons (ninety thousand tons) in our stocks with market approval by dnpm (national department of mineral production - brazil). We are open for visits in our stock in brazil.
