Because of the bright future of the universal requirement for DRI briquette over the next two decades, a new method was created in 2009 in Iran to produce a cold briquette of CDRI (Patent No. IR60923). Cold-Briquetted Sponge Iron (CBSI) was the name given to the new product. Afterward, following pilot-scale and performing various laboratory studies, Cold-Briquetted Iron and Carbon (CBIC) was invented in Iran as a premium product over CBSI because of the prior�¢??s higher carbon content sand higher efficiency through processes of steelmaking (Patent No. IR84090).
Owing to the fact that the cold-briquetting process of DRI is being done under high pressures, the density and mechanical strength of CBIC should be higher and the surface area and also porosity should be less than DRI�¢??s. thus, the oxidation rate, dust and fine generation rate, and the moisture adsorption capacity of DRI will considerably decrease through the process of cold briquetting. These improvements would have big technical, economic and environmental effects on direct reduction and industries steel manufacturing and will push them heading for more sustainability
We can offer Iron Ore, Iron Ore-VTM, Chrome Ore from our mines allocation in South Africa. Besides we have a huge allocation for Reclaimed Pig Iron Nuggets (Fe min 78%) Fe Fine Briquettes (Fe Minimum 60%). We also offer Vanadium-Titanium-Magentite Ore (VTM) and regular Fe Ore from our Mines allocation in South Africa.
PRODUCT: Iron Ore Fe Content 56%-68%> min Fnes and Lumps
HUMIDITY: Equal to or less than WMT/Month
DURATION: 12 Months With rolls & extensions
SHIPPING: CFR ANY PORT
PAYMENT: 100% Letter of Credit at sight
INSPECTION: SQS / CIQ of loading port and discharge port
Our Company's main office, Etco fzc, is located in Dubai, UAE. I am their representative in Iran and dealing with exporting Iron Ore from Iran. Through all our connection to many mine owners and Iron Ore trading company, We can provide Iron Ore From 56% (Reject 55%) to 61% (Reject 60%) and with acceptable analysis (See attached photos).
Our ability to offer is from 30000 mton/month to 90000 mton/month X 12.
The term we prefere is FOB Bandar Abbas Port, Iran (The proposed price is tried to be considered in the way that both sides intrests are seen)
The Payment terms must be TT and with 35% to 45% advance payment, about 15% to 20 % after SGS or other labarotories tests and the remaining after each B/L.
Please contact me through the followings:
Sponge iron is used in the iron and steel industry as a substitute for scrap in induction and electrical arc furnaces. Over the years, the shortage of expensive melting scrap has made sponge iron a significant raw material for manufacturing high quality steel.
For Price , specification and other details please contact us.
Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines.
Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.
Product: Lump ore.
62-63% Fe Hematite ,
Origin: Brazil.
Port of loading: Sepetiba, Rio de Janeiro.
Trial Quantity: 150,000 metric tons x12
Price: $120 per metric ton CFR
We are supplying high quality of C.I/D.I Fittings. C.I.D Joints (sizes 80 mm to 1200 mm), Butter Fly Valves, Non Return Valves & Air Valves (sizes 80 mm to 1200 mm), Pipes, Fittings and Flanges.
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red.
The iron is usually found in the form of
Mangnetie (Fe3O4, 72.4% Fe) hematite (Fe2O3 69.9%)
goethite ((FeO(OH), 62.9% Fe) Limonite (FeO(OH) n(H2O) 55% Fe) siderite (FeCO3, 48.2%, Fe)
Ores containing very high quantities of hematite or magnetite, typically greater than about 60% iron, are known as natural ore or direct shipping ore, and can be fed directly into iron-marking blast furnaces.
Iron ore is the raw material used to make pig iron which is one of the main raw materials to make steel 98% of the mined iron ore is used to make steel.
In 2011 the Finacial Times quoted Christopher LaFemina, mining analyst at Barclays Capital, saying that iron ore is " More integral to the global economy than any other commodity except perhaps oil".
