Electro-Galvanized wire
Material: Low carton steel wire,Q195.
Technical explanation:
Electro galvanized wire gauge from BWG8-BWG32
Tensile strength is 45kg/mm2-70kg/mm2
Firmed coating layer
The single roll wire without any inter-cuts of breaks
Customers size is available.
Characteristic¬}Application: High Zinc coating with super in corrosion resistance, firmed and well-proportioned Zinc coating, slippery surface, uses in the weaving of wire mesh and reprocess, widely used in industry., agriculture and stockbreeding etc.
Package:0.3kgs to 1000kgs are available, plastic inside and weaving bag outside.
Fe 63.5% min rejection below 62.5%
Sio2 4.5% max rejection above 4.5%
Al203 4.5% max rejection above 4.5%
P 0.07 max rejection above 0.08%
S 0.07% max rejection above 0.08%
Moisture 8.00% at 105 degree centigrade .
Size above 10 mm 10 max
Size below 10 mm 90% max
Size below 0.15% max 35% max.
Specifications product:
1. Titanium (1v) oxide for fiber optics especially pure 7-5 tio2 99, 998>
Parameter percentage by mass
Vanadium 1.0 x 10-5
Nickel 0.5 x 10-5
Iron 1.0 x 10-4
Cobalt 0.5 x 10-5
Manganese 0.3 x 10-5
Copper 0.5 x10- 5
Molybdenum 5.0 x 10-5
Chromium 0.5 x10-5
Aluminum 1.0 x 10-4
Tio2 99, 9997 ( calculated as 100% minus 9 above listed metals)
2. Quartzs stone- lumps: quartzs found in our mines comes with 99% silica content sio2.
Parameter
Specification
Sio2
98 % min - 99% max
Al2o3
1 % max
Na2o+k2o
0.3 % max
Total moisture
4 % max
Tumbler index (+6.3mm)
85 % min
Nominal size (10-40mm)
90 % min
Undersize (-10mm)
5 % max
Oversize (+40mm)
5 % max
Galvanized iron wire can be classified into hot-dipped galvanized iron wire and electro galvanized wire according to the differences of processing.
Sizes of hot-dipped galvanized wire: 8# to 36#(wire diameter ranging from 3.8mm to 0.19mm).
Sizes of electro galvanized wire: 8# to 38# (wire diameter ranging from 3.8mm to 0.15mm).
Applications of galvanized wire: Communication devices, medical treatment equipment, weaving of wire mesh, making of brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts, etc.
Fe : 63+% basis and rejection below 62.5%.
Alumina (al2o3) : 4.00% max
Silica (sio2) : 4.00% max
Sulphur (s) : 0.06% max
Phosphorous (p) : 0.06% max
Moisture : 8% maximum
Physical (size) (on natural basis)
Below 10mm 90.00% min.
Above 10mm 10.00% max
Below 150micron 30.00% max
Corrtech silicon iron anodes are made by chill casting in metal mould. The anodes have high density, compact crystal structure and low consumption rate, thus have longer life than other anode.
We produce this kind of anodes according to astm a518-86(grade 3) standard. They are made by chill cast technology, and have much higher performance and better quality than normal sand mould casting.
Alloy composition
The alloy contains chromium which is preferable suited to situations where chlorine or other aggressive agents may be generated by electrolysis (e.G. In seawater or in deep well ground beds).
Galvanized steel wire, also written as electric galvanized steel wire, or galvanized iron wire, galvanized wire can be further divided into electro galvanized iron wire and hot-dipped galvanized iron wire.
Electro galvanized iron wire and hot-dipped galvanized iron wire are mainly used for weaving of fencing mesh, iron wire in construction and other application.
Wire gauge swg in mm bwg in mm in metric system mm
8#, 4.06, 4.19, 4.00
9#, 3.66, 3.76, -
10#, 3.25, 3.40, 3.50
11#, 2.95, 3.05, 3.00
12#, 2.64, 2.77, 2.80
13#, 2.34, 2.41, 2.50
14#, 2.03, 2.11, -
15# 1.83 1.83 1.80
16# 1.63 1.65 1.65
17# 1.42 1.47 1.40
18# 1.22 1.25 1.20
19# 1.02 1.07 1.00
20# 0.91 0.89 0.90
21# 0.81 0.813 0.80
22# 0.71 0.711 0.70
23# to 34# also available for galvanized iron wire.
