red iron oxide >= 84 88 % YELLOW iron oxide >= 84 % IN JUMBO BAGE THEPRICE FOB ANY PORT IN EGYPT
Ningxia Biyuan Activated Carbon Co., Ltd. sells iron ore sand beads for polishing with low density, good roundness, no pollution or damage, and at the same time 20 to 30 times longer than glass beads, high efficiency, and long working time. Good toughness, low extrusion rate, reusable, it is energy saving and cost-effective. Main application 1. Aerospace equipment: aluminum alloys and titanium alloys, etc. 2. Metal processing: strengthening of mechanical parts, cylinder heads, surgical instruments, golf balls, artistic effects, beautification of aluminum alloys, dense plasma coating, cleaning or surface blasting, artificial joints, springs, gears, eyeglass frames. 3. Automotive industry: shock absorber spring surface fatigue, strengthening treatment. 4. Turbine industry: steam turbine blade surface treatment, strengthening treatment.
Detailed Information of our iron oxide desulfurizer Iron Oxide Desulfurizer is made of iron,manganese salt and their oxide as raw material,pass through the process chemosynthesis to be active oxide, then add the assistant and binder to make it columnar solid .It has features of larger sulfur capacity ,small resistance,high purification capacity and good water resistance
Reduced Iron Powder decription Reduced Iron Powder,also known as direct reduced iron sponge, using high-quality ore, the use of oxidation-reduction reaction principle, in addition to sediment through the filter approach to exclude, for pipes, the boiler and recycled water dissolved oxygen corrosion by water dissolved oxygen content of water up to 0.05mg / L or less. Having low backwash frequency, high compressive strength, not powder, not compacted, large surface area. High activity, good regeneration effect and so on.
Iron Oxide Red is also called Iron Oxide Red, Red Oxide and Red rust Formula: Fe2O3 Molecular Weight: 159.69 CASNo. : 1332-37-2 1, in the building materials industry is mainly used for color cement, color cement floor tile, color cement tile, imitation glazed tile, concrete floor tile, color mortar, color asphalt, terrazzo, Mosaic tile, artificial marble and wall painting; 2. Used for coloring and protection of various coatings, including water-based interior and exterior wall coatings and powder coatings;It is also suitable for oil paints including epoxy, alkyd, amino and other primers and topcoats.Can also be used in toy paint, decorative paint, furniture paint, electrophoresis paint and enamel.Iron red primer has anti-rust function and can replace high-priced red lead paint to save non-ferrous metals. 3, for the coloring of plastic products, such as thermosetting plastics and thermoplastics, and the coloring of rubber products, such as car inner tube, aircraft inner tube, bicycle inner tube, etc. 4, used for advanced fine grinding materials, used for precision hardware instruments, optical glass polishing.High purity is the main base of powder metallurgy, used to smelt various magnetic alloys and other advanced alloy steel.From ferrous sulfate or iron oxide yellow or waste iron mixed by high temperature calcining, or made directly from the liquid medium.
IRON-COBALT VANADIUM ALLOY - P6 Alloy ; (Composition (Nominal) 6.00 Ni, 45.00 Co, 4.80 V, Bal. Fe; ) :(A ductile, semi-hard magnetic alloy which has been used in laminations for hysteresis motors. Alloy exhibits highest efficiency (loss per unit magnetic field strength) of any known material. :(Product availability and request a QUOTE!
SOFT MAGNETIC - IRON COBALT ALLOY Permendur 49 : (Composition (Nominal): Fe49; V2; Co49:) :(PERMENDUR 49 exhibit the highest magnetic saturation (2.4 T) of all soft-magnetic alloys. high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. : (Specifications: ASTM A801 Alloy Type 1 ; ( Please request a QUOTE for material Datasheet ?
ron Nickel alloy ASTM F30 alloy 46 ;( Composition (Nominal) Ni 46 ; Fe Balance: ( Alloy 46 is a nickel-iron controlled expansion alloy containing 46% nickel. It has a fairly constant coefficient of thermal expansion from room temperature up to 500 °C. ; : (SPECIFICATION: ASTM F30
Glass Sealing 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( Alloy 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
Nilo 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( Nilo 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
INVAR 42 Alloy :(Composition (Nominal): 0.05 C, 0.40 Mn, 0.25 Si, 41.0 Ni, Bal. Fe; : ( INVAR 42 A nickel-iron controlled-expansion alloy containing 41% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300°C.Used for glass-to-metal sealing of components that are enclosed in a glass envelope,such as lamps and electron tubes. :(Specification : ASTM F30 ; ( Product availability and request a QUOTE!
Nickel Iron Alloy 48 UNS K94800/ Nilo 48 ASTM F30 ; ( Composition (Nominal): Ni48 ; Fe Balance ; )Alloy 48 (Nilo 48) is a low expansion Nickel-Iron alloy. The coefficient of thermal expansion of this metal is designed to suit the CTE of soft lead and soda lime glasses. High Inflection point. Its service temperature goes as high as up to 450oC or 840oF. : (Product availability and request a QUOTE!
SOFT MAGNETIC IRON COBALT ALLOY Hiperco 50A ; (Composition (Nominal): Fe49, V2 , Co 49, :)Hiperco 50A Alloy is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (2.4T), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. :) Specifications: ASTM A801 Alloy Type 1 ;( Product availability and request a QUOTE!
IRON NICKEL ALLOY ASTM F1684 INVAR 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; ( Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
Iron-Nickel-Chromium alloy NI SPAN C902 UNS N09902 .,;( Composition (Nominal): Ni 43 ., Cr 6., Ti 3. Fe Balance ., :( Ni-Span C902 nickel iron chromium alloy is precipitation hardenable. It can attain controlled thermoelastic coefficient and static elastic modulus at temperatures from -50° F to 150° F. The main constituents of alloy are iron, nickel and chromium with nominal traces of titanium and aluminum. These elements produce a reddish-brown oxide layer upon exposure to natural conditions since it does not have the same qualities as stainless steel. Additionally, nickel iron chromium alloys feature nominal expansion after hot and cold processing. (Product availability and request a QUOTE!
Synthetic Iron Oxide is one of the most widely used pigments in the world. A variety of colors (Pigment red 101, Pigment yellow 42, Pigment black 11, Compound brown, orange, blue, green) and excellent performance/cost ratio make them fit into lots of different applications
1.Detailed Product Description: 1.High Quality and the best service ; 2.Cheapest Price ; 3.Many lines for making ; 4.Verious size of Product. 2.Specifications: Deformed bars/reinforced bars: 1.Material:GB--HRB400/HRB500 ; BS4449--460B/500B; ASTM A615-Gr40/60 ; AS4671--500N/500E; JISG3112--SD400 ; DIN488-1--BST500S; KS-SD390. 2.Standard.:ASTM/JIS/DIN/BS/GB; 3.Diameter:6-50mm. 4.Package: 1 U Shaped folded Bundles A U Shaped Once Folded in Bundles B Each Bundle about 2 Metric Tons C Lengths ranging 12 Meters D Ends tied up with High Tensile Wires for maximum safety, lifting and transportation 2 Unfolded / Straight Bundles A Unfolded / Straight in Bundles B Each Bundle weighing about 2 Metric Tons C Lengths ranging from 1 Meters upto 12 Meters D Ends tied up with High Tensile Wires for maximum safety, lifting and transportation 3 Rounded Coils A 2 Metric Ton Coils for Bending / Cutting Machine use B Each Bundle weighing 2 Metric Tons C Well tied up with High Tensile Wires for maximum safety, lifting and transportation
1.specification 1. Wire Gauge: 5.5mm, 6.5mm, 8mm, 9mm, 10mm, 11mm, 12mm; 2. Material: SAE1006, SAE1008,Q195,Q235,77B,82B or according to customers requirements; 3. Package: in coils and load in container, if large quantity, by bulk vessel; can be packed as customersâ?? special requirements; 4. Coil weight: 1.8-2.1 tons; 5. Application: Construction building, netting, package, rope and so on; 6. The third party inspection: BV SGS China national construction steel quality supervision and test centre.
Item # 1722 Size Inch 7
Item # 1723 Size Inch 7
