Fe : min 52% SiO2 : max 10% Tio2 : below 1% Size : Raw Quanity : 40.000 MT /month
Unearth the epitome of excellence with our exquisite iron ore, meticulously extracted from the bountiful mines of Peru. Elevate your expectations as we proudly present a premium-grade resource, showcasing an astounding iron content spanning an impressive 62% to 68%. Crafted with meticulous precision and unwavering care, our iron ore stands as the epitome of top-tier raw materials, meticulously tailored for an array of industrial applications. Welcome to a realm where quality meets precision, and your manufacturing processes are set to soar to unparalleled heights.
Iron ore of Hematite and Magnetite are available.
Iron ore of Hematite and Magnetite are available.
Iron Ore Fob - Fe 63% to 66% in all major port of Mindanao Philippines.
Introducing the Iron Ore Lumps which are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. The iron is usually found in the form of magnetite. Fe 50% ~ 52%, Size Ratio 10 mm- 60 mm (85%) Fe 48% ~ 50%, Size Ratio 10 mm - 60 mm (85%) Ores containing very high quantities of hematite or magnetite (greater than about 60% iron) are known as "natural ore" or "direct shipping ore", it means they can be fed directly into iron-making blast furnaces. Iron ore is the raw material used to make pig iron, which is one of the main raw materials to make steel 98% of the mined iron ore is used to make steel. Quality Specifications: Fe 50% ~ 52%, Size Ratio 10 mm - 60 mm (85%) Fe 48% ~ 50%, Size Ratio 10 mm - 60 mm (85%) S 0.7% (maximum) Al2O3 5% (maximum) SiO2 15% (maximum) P 0.15% (maximum) Moisture 5% (maximum) Available Stock: 100,000 MTN MOQ: 25,000 MTN Packaging: Woven Bags Sample: Cost to be borne by buyer Delivery Time: Delivery subject to weather conditions as rains may affect mining operations our associated miners has set their operations in multiple regions of Pakistan from where we brings bulk quality Iron Ore to Karachi the port city from where after dully processes it gets delivered/exported. Since we are beginners in trade of iron ore and have potential to invest much to gain expertise on iron ore supplies while our senior team monitored the production operations at site. Our quality policy never compromised on the quality of our products which is guaranteed. We have well-experienced craftsmen they comply the international quality standards and maintain the high level. We have fastest order processing team who never compromise in commitments, our in-time deliveries/shipments is our deliberation of commitment with customer satisfaction. Our values are customers satisfaction with market competitive prices which we always respect and offered.
62% FE & Above Origin: South Africa, Zambia, DRCongo, Tanzania QTY: 50,000 MT * 2 Shiploads per month Delivery Term: FOB Tanga Port, Tanzania Payment Terms: SBLC / DLC Packaging: in Bulk
Fe3O4 powder has various properties like high magnetic content, density, color etc due to which it has found use in various specialized applications. We offer best quality to give lowest consumptions with reliable supply and affordable pricing. Other uses include weighting agent, pigments etc. For more details please contact us with your queries and requirement details.
If there is a interest to source Iron Ore having Fe 50-58%. Pakistan origin.
COMMODITY: IRON ORE PHYSICAL: LUMPY/STONE SIZE: HEADSIZE TO APPLE SIZE FE: 64% AND UP VOLUME PER MONTH: 30,000MT TO 60,000MT PAYMENT: 100%LC
Iron Ore FeO : 68.89% TiO2 : 0.90% V2O2 : 0.25%
Iron production at 12% in mines in Peru, Trujillo Ancash, Cuzco
A scale, $144ton. MIX-scale, $72 ton. C-scale, $36 ton. FOB
Iron Ore - Fe 60% to 63% - Magnetite Product Description: Magnetite filter media is suitable for tubular high resistance water distribution systems. In the three-layer filter, it is usually matched with anthracite filter material and quartz sand filter material. It is a good batching program, and has good adaptability to the improved filter layer and water distribution system. It is an indispensable filter for the multi-layer filter material. It has the advantage of a filtration rate of 30-40 m / h. Therefore, magnetite filter material is an important filter material.
We represent iron ore mines in South America (Chile, Peru). Monthly supply amount 200,000 Metric Tons. Low Sulphur and phosphorus content. 62-69% Fe 10-30mm MOQ - 50,000MT
Cold Briquetted Iron (CBI) is defined as DRI which has been molded at a temperature less than 650 �°C or with a density of less than 5000 kg/m3. Due to the raw material sharp shortage for steelmaking in many countries worldwide, a need arises to find a substitute material to replace the rare pig iron and expensive steel scraps that were used by steelmaking plants. 1- More density and less porosity The apparent density of CBI is about 8.3 grams per cubic centimeter and the density of DRI is about 2.3 grams per cubic centimeter. On the other hand, the volumetric porosity of these two products is about 30 and 50%, respectively. These two factors reduce the environmental reactivity of CBIC and its lower transportation costs. 2- Less fine The wear resistance and higher mechanical strength of CBI compared to sponge iron causes less softening to occur during the handling of the product, and as a result, both the economic value of the product is prevented and the charge losses of the product in the steelmaking furnace are prevented. is significantly reduced. 3- Easier to store and carry Due to the lower reactivity of CBI compared to DRI, the loss of metal grade of the product during storage and transportation is significantly reduced, which will reduce the amount of economic value loss of the product from the time of production to the time of use in the steelmaking furnace. On the other hand, sea transportation of CBI leads to a reduction in transportation costs compared to DRI due to the absence of the need to apply neutral gas to prevent product activation. 4- More thermal and electrical conductivity The thermal and electrical conductivity of CBI is about 2 times that of DRI. This higher conductivity of CBI improves the distribution of heat created in the steelmaking furnace and, as a result, accelerates the melting process of iron materials. This will mean reducing the melting time of the steelmaking process and improving the production capacity of the steelmaking unit. 5- Carbon adjustment The presence of carbon in steelmaking furnaces is necessary in order to provide carbon for the final steel product, prevent excessive losses of iron, and also regulate the physical and chemical conditions of the slag. Usually, induction furnaces require low-carbon iron materials, but in electric arc furnaces, high-carbon iron materials are more attractive. The unique feature of CBI product is the ability to adjust its carbon content in the range of 0.5 to 4% by weight and based on the needs of customers.
we are looking for buyers of iron ore, copper ore, nickle and limestone, manganese and kaolin clay. we have here in the philippines, Copper concentrate stockpile 40MT, copper ore stockpile 10,000MT, iron ore stockpile 200,000MT FOB philippines my watssap is +639237291296 The price of iron ore Fe 62% is $70 per MT FOB Misalip, zamboanga Philippines Payment term is 100% usance LC 100% LC 30% down payment 70% before departure Copper is LME price 8916.50 x 25.54% assay grade x 40% discount = $1,366.36/MT Other supplier is 26% price is $1,400FOB philippines.
Unrefined product
IRON ORE: LUMPS, FINES, PELLETS, POWDER (CIP ASWP & EXW) SELLER Lucrative Mining Operation. Direct to End Seller. SGS samples, Seller Contract Format, Mine Coordinates & More Available. 64.5 FE (Can be blended to any SPEC 63.0 FE) - Quantity: 150,000MT per Month 4M MT Per Month - Term: CIP and EXW (Incoterm Description Below) - Reduced Pricing: -10% Platts Discount/MT - Commission: (To be determined by order volume) - Payment Method: Letter of Credit at Sight (Several credit payment types available)
Iron Ore (Lumpy) Grade : 62% Origin: Cagayan De Oro,Philippines Load port: Cagayan De Oro Port Quantity: 30 - 50,000 mt per shipment QnQ: SGS, CCIC , OR INTERTEK Payment: L/C at sight
