If there is a interest to source Iron Ore having Fe 50-58%. Pakistan origin.
COMMODITY: IRON ORE PHYSICAL: LUMPY/STONE SIZE: HEADSIZE TO APPLE SIZE FE: 64% AND UP VOLUME PER MONTH: 30,000MT TO 60,000MT PAYMENT: 100%LC
Iron Ore FeO : 68.89% TiO2 : 0.90% V2O2 : 0.25%
Iron production at 12% in mines in Peru, Trujillo Ancash, Cuzco
A scale, $144ton. MIX-scale, $72 ton. C-scale, $36 ton. FOB
Iron Ore - Fe 60% to 63% - Magnetite Product Description: Magnetite filter media is suitable for tubular high resistance water distribution systems. In the three-layer filter, it is usually matched with anthracite filter material and quartz sand filter material. It is a good batching program, and has good adaptability to the improved filter layer and water distribution system. It is an indispensable filter for the multi-layer filter material. It has the advantage of a filtration rate of 30-40 m / h. Therefore, magnetite filter material is an important filter material.
We represent iron ore mines in South America (Chile, Peru). Monthly supply amount 200,000 Metric Tons. Low Sulphur and phosphorus content. 62-69% Fe 10-30mm MOQ - 50,000MT
Cold Briquetted Iron (CBI) is defined as DRI which has been molded at a temperature less than 650 �°C or with a density of less than 5000 kg/m3. Due to the raw material sharp shortage for steelmaking in many countries worldwide, a need arises to find a substitute material to replace the rare pig iron and expensive steel scraps that were used by steelmaking plants. 1- More density and less porosity The apparent density of CBI is about 8.3 grams per cubic centimeter and the density of DRI is about 2.3 grams per cubic centimeter. On the other hand, the volumetric porosity of these two products is about 30 and 50%, respectively. These two factors reduce the environmental reactivity of CBIC and its lower transportation costs. 2- Less fine The wear resistance and higher mechanical strength of CBI compared to sponge iron causes less softening to occur during the handling of the product, and as a result, both the economic value of the product is prevented and the charge losses of the product in the steelmaking furnace are prevented. is significantly reduced. 3- Easier to store and carry Due to the lower reactivity of CBI compared to DRI, the loss of metal grade of the product during storage and transportation is significantly reduced, which will reduce the amount of economic value loss of the product from the time of production to the time of use in the steelmaking furnace. On the other hand, sea transportation of CBI leads to a reduction in transportation costs compared to DRI due to the absence of the need to apply neutral gas to prevent product activation. 4- More thermal and electrical conductivity The thermal and electrical conductivity of CBI is about 2 times that of DRI. This higher conductivity of CBI improves the distribution of heat created in the steelmaking furnace and, as a result, accelerates the melting process of iron materials. This will mean reducing the melting time of the steelmaking process and improving the production capacity of the steelmaking unit. 5- Carbon adjustment The presence of carbon in steelmaking furnaces is necessary in order to provide carbon for the final steel product, prevent excessive losses of iron, and also regulate the physical and chemical conditions of the slag. Usually, induction furnaces require low-carbon iron materials, but in electric arc furnaces, high-carbon iron materials are more attractive. The unique feature of CBI product is the ability to adjust its carbon content in the range of 0.5 to 4% by weight and based on the needs of customers.
we are looking for buyers of iron ore, copper ore, nickle and limestone, manganese and kaolin clay. we have here in the philippines, Copper concentrate stockpile 40MT, copper ore stockpile 10,000MT, iron ore stockpile 200,000MT FOB philippines my watssap is +639237291296 The price of iron ore Fe 62% is $70 per MT FOB Misalip, zamboanga Philippines Payment term is 100% usance LC 100% LC 30% down payment 70% before departure Copper is LME price 8916.50 x 25.54% assay grade x 40% discount = $1,366.36/MT Other supplier is 26% price is $1,400FOB philippines.
Unrefined product
IRON ORE: LUMPS, FINES, PELLETS, POWDER (CIP ASWP & EXW) SELLER Lucrative Mining Operation. Direct to End Seller. SGS samples, Seller Contract Format, Mine Coordinates & More Available. 64.5 FE (Can be blended to any SPEC 63.0 FE) - Quantity: 150,000MT per Month 4M MT Per Month - Term: CIP and EXW (Incoterm Description Below) - Reduced Pricing: -10% Platts Discount/MT - Commission: (To be determined by order volume) - Payment Method: Letter of Credit at Sight (Several credit payment types available)
Iron Ore (Lumpy) Grade : 62% Origin: Cagayan De Oro,Philippines Load port: Cagayan De Oro Port Quantity: 30 - 50,000 mt per shipment QnQ: SGS, CCIC , OR INTERTEK Payment: L/C at sight
Iron Ore Fe 62% Origin : Mexico, Chile and Other Price : $80 Incoterms : FOB Quantity : trial 50.000 MT, following order 100.000 MT - 250.000 MT Packaging : Bulk on Barga/MV Port of Loading : To be confirmed on contract signed Payment : 100% at sights port loading
Iron Ore 60% and above grade analysis raw...our aim is to direct the buyer to the mine site owners to negotiate for the buyer to purchase the lowest price as possible and we have many mining sites partner . Whatever minerals the buyer looking for, we can look and negotiate for the benefits of the buyer and we assured to do honest and transparent business transaction.
OFFER COMMODITY Iron Ore Magnetite Fe 62% base CAPACITY 50,000MT to 500,000MT monthly PRICE CIF PLATTS minus 10% to 12% China FOB USD $55 MT PAYMENT LC Non-Transferable, transferable 100% at loading port AVAILABLE Iron Ore Magnetite Fe 65% base CAPACITY 50,000MT to 150,000MT monthly PRICE CIF FOB PAYMENT DLC Non-Transferable Please contact us for more details, thank you
We Have Two Mining Owners And Government High Level Chief Join Together We Are Mandate And Shareholder Of All Sources One From Indonesia 62% Trail 50000mt And 100000mt/per Month Can Accept Cif One From Mexico Only Fob And Tt Only And Buyer Need Arrange Shippement By Himself And Need Pay The Expoting Tax And The Mine To Port Shipping Fee 62-64% 100000mt/per Month At Now Had Spot 8million Mt Only 30-45% Iron Ore Need To Arrange To Be Choiced Into 55%-60% And Delived To Shipping From Peru By Fob We Also Have Several Endbuyer From Chinese Steel Refinery Of State Or Govement Central So If You Are The Endbuyer Or His Mandate Pls Send The Loi To Us
our miner was indonesia 62% we only work on endbuyer or his mandate if you send the loi to us price may be LME-?% can detail to discussion follow procedure
Quantity : We will commit to 50,000 +/- 10% MT to be delivered to Mother Vessel 30 days after receipt of signed and sealed Original Copy of Contract and confirmation of Documentary Letter of Credit (DLC). Size : 10 �¢?? 40 mm�?? Loading Port : Davao, Philippines Delivery Packing : CFR, China main ports : Loose Bulk
Greeting (For who it might concern) We are Indonesia Prifat Company engaged in mineral mining. We profide you "the Best Quality with better Price" of several types of mineral commodities, IRON ORE - 65.60 Fe SILICA SAND - 99.27 SiO2 NICKEL - 89.35 list of percentage of income to facilitate our bussiness communication, we provide a Whatsapp hotline service. for those of you our prospective buyers we respect
Our Trading Partner Can Provide The Iron Ore 62-64.3% Origin: Mexico, Chile, Peru and South Africa. I will check thair track record. PRICE BASE ON 62% If You Are Serious Buyer Pls Send Loi To Us We Only Work On Buyer Mandate And Endbuyer
