1. Energy Saving: greatly reduce cost consumption, lower water and electric costs.
2. High efficiency: high efficiency power system design, quick response, even low speed
has high efficiency performance.
3. High stable operation: closed-loop control system, it is very suitable for precision molding.
4. Quiet: low noise
T series: from 60t~2000t. This series is suitable for all kind dimensions product in high speed molding, such as cap, cup, chair, bucket, large bucket products.
V Series: This series is suitable for mid/ high end general products.
E Series: This is a best selling Series and suitable for precision electronic product, ultra-thin product and ultra-high speed injection molding.
T Series: This series is suitable for all kind dimensions product in high speed molding, such as cap, cup, chair, bucket, large bucket products.
R Series: This series is rotary table type two injection units and two cores pulls models, suitable for two-component clear-cut products and heterogeneous material products.
D Series: This series is suitable for electronic product and is easy to measure, easy for setting. It can last longer life.
1875 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
ES Series: A newly developed high-tech intelligence model, suitable for high end precision products. This design can accomplish energy-saving, high efficiency, high stable operation and quiet working environment
V Series: This series is suitable for mid/ high end general products.
E Series: This is a best selling Series and suitable for precision electronic product, ultra-thin product and ultra-high speed injection molding.
T Series: This series is suitable for all kind dimensions product in high speed molding, such as cap, cup, chair, bucket, large bucket products.
R Series: This series is rotary table type two injection units and two cores pulls models, suitable for two-component clear-cut products and heterogeneous material products.
D Series: This series is suitable for electronic product and is easy to measure, easy for setting. It can last longer life.
Our plastic rigid flat net machine is dedicated equipment for producing hard plastic flat net with polyethylene (PE) as major raw material, and may manufacture multiple structure and specification products by converting orifice module and sizing device. The equipment is designed and manufactured by our plant upon combining advanced foreign technology with practical domestic situations, which has reasonable structure design, stable and credible performance, and easy operation and maintenance. Hard plastic flat net products from the equipment are widely applied for mattress interlayer, dike landslip-preventive net, subgrade strengthening, plant support net, building safety net, mine canopy guard net, pocket net, as well as packaging net for melon and fruit and vegetables, so it is also called universal net.
Model Unit YZPW-2000 YZPW-2500 YZPW-3000 YZPW-4000
Applicable Material PE,PP PE,PP PE,PP PE,PP
Pressing Machine 65/28 90/25 120/25 150/25
Product Width m 2 2.5 3 4
Power kw 68.4 86.4 180 225
Dimension (Length*Width*Height) m 9.6*2.9*3.4 12*3.1*3.5 16*3.8*4.2 18*5.2*4.8
Note:Special requipment is subject to the agreement of the parties.
Max film width(mm):700 900 1200
Max output(kg/h):90 110 130
Screw diameter(mm):íT45 íT55 íT65
Screw & barrel material:38crmoala
Main motor power(kw):11 15 22
Diamter of screw: 65mm
L/d ratio: 30:1
Motor power: 37kw ac motor(simo brand)
Heating power:24kw (cast aluminum heating device)
Cooling motor: 0.25kw*6zones
Screw and barrel: 38crmoala, nitriding treatment
Temperature instruments: japan omron brand
Ac contactors and switches: french schneider
Transuducer: ivent brand
Speed reducer: hard gears speed reducer
The whole production line includes the following major parts:
Srl-z300/600 mixing unit, sjsz-80/156 extruder,
Three rollers calender, cooling table, hauling off machine, winding machine
1300 plastic aluminum composite sheet extrusion line
1600 plastic aluminum composite sheet extrusion line
Inside clapboard of refrigeratory extrusion line
Sj120 pp hollow plate extrusion line
Sj150 pp hollow plate extrusion line
Sj65 pp/pe/abs/ ps plate extrusion line
Sj90 pp/pe/abs/ ps plate extrusion line
Sj120 pp/pe/abs /ps plate extrusion line
Sjsz65/132 pvc plate extrusion line
Sjsz80/156 pvc plate extrusion line
Epe foam fabric production line
Eps foam sheet extrusion line
Xps heat reserving foam plate extrusion line
Composite plate extrusion lineú¿three layersú¬
Pp composite plate extrusion line
Pe physical foam net production line
This machine is for the first process order in the production of cap.
The sy-30b plastic bottle cap moulding machine can melt those studded plastic materials with high temperature and cut into the moulding hollows well-proportionedly, and then make into different types of caps. The caps made from this machine will not have any injected hole in the middle, so they looked quite smooth and nice.
The machine is computer-controlled so that makes sure both the mold and the plastic materials to be moderate , and thus ensure the stability and endurance for the equipment.
The characteristics include like easily operated, energy-saving and labor-cost saving. And the production capacity is triple than that of plastic-injected molding machines of the same power. This is a big step in the cap production industry.
Main technical features
Type: sy-30b
Capacity: 10000-12000pcs/hr.
Power for electric machine of the die cut machine: 2.2kw
Power for electric machine of the extrusion machine: 4kw
Power for heating ring of the extrusion machine: 7.2kw
Power, voltage: 380v, 50hz;or 220v, 60hz
Weight: 2800kgs
Size: 2400x1300x1700mm
Operational principle of pom.Pp.Pmma.Ptfe stick extruder unit: single- screw extruder nose extrudes, mould finalizes the shape, cooling trough cools, the traction machine draws, the saw cutting machine or planetary cutting machine finally cut. They have the advantages of stable performance, convenient observation, little noise, good quality and low price.
Application scope: they are appliable to produce hard pipes or plastic sticks products such as pvc stick, pom stick, ptfe stick, pom transparent pipe and pc (organic glass). This unit is also appliable to produce high-class transparent organic glass tubes.
1875 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
