The molds of the former vertical injection molding machine for rain boots was liable to wear down.The quality of rain boots was not good,and the machine was not easy to operate.Therefore,we imported the latest technique to develop the "Auto rotary injection molding machine for rain boots".The molds of NSK-375 can open and close automatically,which can save manpower and make it easy to operate the machine.With the "Wind pressure auto molding system",the operators can easily remove finished products from the molds without damaging the lasts so that the molds can last longer.
The NSK-375 adopts direct-pressure injection which generates high pressure.It can produce boots of different sizes at the same time.The high clamping pressure ensures the quality of products.The machine can produce boots of different sizes or heights simultaneously,which reduces production time.Furthermore,the machine also can produce sandals by changing the molds.
Product Character
1.The NSK-375 is the first machine with the photo-cell digital locating system in Taiwan. It is easy to accurately adjust the ejection quantity.
2.The machine is specially designed for producing rain boots. It is automatic, economical,efficient, and easy to operate.
3.The machine is run by a hydraulic system. The machine can adjust clamping pressure and can work at high speed.
4.The NSK-375 has eight(8)molds; freely select their usage; molds can be opened and closed manually or automatically.
5.Besides the 16"(45mm) rain boots, it can also produce pumps, slippers, and sandals.
6.With the "Wind pressure auto mold-opening device", the operators can remove the finished products from the molds without damaging the lasts. The molds can therefore last longer.
7.Two options for ejection quantity are available: a fixed quantity or full mold.
8.Powerful mold clamping prevents burrs.
9.Many different sizes of rain boots can be produced at the same time. Also sandals and rain boots can be produced simultaneously.
10.The machine is suitable for P.V.C.,T.P.R.,and N.B.R...etc.
Sandwich panel forming line is specialized machine of new type building material, it main function is compounding color steel on thick, lighter core material eps panel or rock wool panel.
Sandwich panel is one new type building material, ideal decorate material, lightweigt, high intensity, good appearance, convenience construct, short period of construction, and have heat preservation, waterproof and so on kinds of nature.Suitable for bulk storage plant, industral factory building, large-span roofing, frige, clean room, air conditioning equipment room and temporary shelters.Our sandwich panel forming line can produce six different panel.
Max width: 1200mm
Max thickness: 25cm
Working speed: 0¡«3.8M/min
Power: 34.1kw
Weight: 15¡«16t.
Suitable for all kinds of fabric
Variable speed from 0-60mtrs/min.
Counter meter for length measurement
Selvedge guider for uniform plaiting.
Tensionless handling of fabric through positive drive.
Independent variable feed drive for tensionless feed also fitted with auto loop level positioning mechanism
Maximum working width up to 300 cms
Pile height 35 cms
Adjustable fold length 75 – 110 cms
Adjustable table lowering through special electro-mechanical controls depending upon the fabric thickness
Vertical injection with vertical injection, suitable for insert molding. computerized LCD monitor NC control system, easy to maintain and operate the machine. Applied for general plastic/engineering plastic.
High speedy injection molding machine :one up mold and two down mold.
Injection molding machine features:
Vertical clamping with vertical injection, small occupation, suitable for insert molding. Computerized lcd monitor nc control system, easy to maintain and operate the machine. Applied for general plastic/engineering plastic. Applicable for injection of power cord plugs, electric plugs, electronic parts, auto parts, computer parts, plastic fork/knife, plastic dishware, screwdriver, hardware, sunglasses frame, ball-point pen etc.
Export standard timber box.
1875 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
We offer our patrons a top-of-the-line range of roll forming sections that is fabricated under the supervision of our expert engineers. These machines are widely demanded in a number of industries owing to the premium quality of our products. Our machines are available at cost-effective rates and are strictly checked on varied parameters before the final dispatch.
1)We can design for you
2)High quality and good service
3)Roof Forming Machine
4)Glazed Tile Roof Forming Machine
Roll forming machine
Tile Machine with 7.5kW Main Motor Power and PLC Controlling System
Consists: (We can customize machine according to your requirement)
Uncoiler and its base
Coil sheet guiding equipment
Film covered device
Roll forming system
Pressing equipment
Post-cutting equipment
Hydraulic station
Controlling system
Supporter table
Material: colored and galvanized steel sheet at yield stress 33KSI
Thickness of coil sheet: 0.5 to 0.6mm
Coil width: 1,000mm
Working speed: 3 to 4m/min (step distance at 380mm)
Power requirement:
Main motor power: 7.5kW
Hydraulic station power: 5.5kW
Maximum passive uncoiler capacity: 5,000kg
Quantity of stands: 15 groups
Controlling system: PLC
Type of cutting: roll-formed and length-set cutting
Voltage: 380V, 3-phase, 60Hz or at buyer's requirement
Machine dimensions: about 18,500 x 1,500 x 1,400mm
Total weight: about 9,500kg
Working flow:
Decoiling sheet
Sheet guiding
Film covering
Roll forming
Measuring length
Pressing
Cutting panel and panels to supporter.
We manufacture roll forming machines that are used for making sections such as Z purlin , C channels, roof panels, crash guards, fenders and any section as per customers specific requirement. Our roll tools are designed by experts and meticulously manufactured which ascertains precise forming of section. We make Cold Roll Forming Lines of input strip width varying from 700mm to 1250mm and thickness ranging from 0.3mm to 3mm. The raw materials that the machine can work with are mild steel, galvanized steel, color coated sheets, aluminum to name a few. Cold Roll Forming is a process that shapes various kinds of sheets or metals passing the raw material through number of roll passes driven by gear drive system. Our machine lines employ a series of paired rollers to progressively shape a flat strip of metal into desired contour such as channel, angle or any other desired shape in the process adding rigidity and strength to the metal. Our Cold Roll Forming Lines find applications in the following industries:
A. Automobile Industry
B. Steel furniture
C. Building and construction
D. Electrical engineering.
2. Equipment capabilities
1). width of raw materail : 60mm- 860mm
2). Product speed by punching: 2.5-5m/min
3). Continuous roll forming speed: 10-15m/min
4). Material thickness: 1-2mm
5). Material require: Q235 cold roll steel
6). Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.
3. Main composition of machine
This unit consists of the decoiler, ML900 flatting, 200 punch, punching die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, electrical control cabinet; etc.
4. Each part major technical parameters
4.1 Drive decoiler
1). Material width 860mm
2). Material weight 6000kg
3). Material outer diameter 1200mm
4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor
5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever.
4.2 Flatting
1) Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls.
2) Flatting bound: Material thickness 1-2mm, material width 100-860mm
3) Drive power: 5.5kw frequency conversion electromotor
4) Speed reducer model: ZQ250
5) Flatting speed: 3-10 m/min
6) Parenthesis up and down a pair of fortified wheel
4.3 Continual punching mould
1. Amount: Each kind of width specification 1 set dies, total 6 sets
2. Die require: Cr12 quench
4.4 Servo feeding
1. electromotor power: 4.4kw
2. Multistage type feeding, memory ten group of memory functions
3. Man-machine contact surface numerical control system
4. Uses Mitsubishi servo meter
4.5 Holds material (use in cushion section)
The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing
4.6 Guider
A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets.
4.7 Main roll forming machine.
Type
GY180(Extra wide)
Rack structure
Dragon Gate type memorial arch frame
4.9 Electrical control
4.9.1 Main operation control cubicle
1) Amount: 1 set
2) Frequency conversion: 3 sets(in main control cubicle, control decoiler, flatting and roll forming machine)
3) PLC control: 1 set
4)8 inch liquid crystal touch screens
5) All electrical element is the Mitsubishi original installation brand
4.9.2 assistant control cubicle
Amount: 3 sets (follow decoiler, flatting, roll forming machine)
Control type : Manual handle
5. After-sale service
1. We see to the equipment's installment, the debugging and free training operators
2. We offer the equipment's details(including the drawing of roll forming mould, Electric appliance schematic diagram, equipment diagram and so on).
- Dehumidifying dryer series
- Material conveying systems
- Hot & cold interchangeable controller series (system)
Granulators & recycling system
Color mixer
Fabrication of customize design machine.
Dakumar servo injection machine, from the model Nr. DKM50 to DKM780, currently the standard servo injection machine is with the injection machine's hydraulic pump servo motor, for the plasticizing servo motor, it is an optional but it is not the standard servo injection machine. Dakumar servo injection machine has started manufacturing on 2007 year, until now we have delivered more than 600 sets of different models of servo motor injection machines to all over the world.
High energy savings of servo injection machine
Under normal operating conditions, compared with conventional hydraulic injection molding machines, energy savings of 20-80% can be achieved.
Molding stability of servo injection machine
Compared with conventional injection molding machines, repeatability is greatly improved due to servo motor closed-loop control.
Quick response of servo injection machine
Featuring a dynamic servo motor with a response time of only 0.05sec.
Quiet operation of servo injection machine
The machine runs at much lower noise levels, particularly in low speed applications.
Reliable holding pressure of servo injection machine
Compared with traditional hydraulic machine the holding pressure is more stable and does not have limitation.
Better oil temperature stability of servo injection machine
The servo system only delivers hydraulic oil as it is needed for the various functions. This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
Servo injection machine high efficient
Dakumar servo injection machine, from the model Nr. DKM50 to DKM1600, currently the standard servo injection machine is with the injection machine's hydraulic pump servo motor, for the plasticizing servo motor, it is an optional but it is not the standard servo injection machine. Dakumar servo injection machine has started manufacturing on 2007 year, until now we have delivered more than 600 sets of different models of servo motor injection machines to all over the world.
High energy savings of servo injection machine
Under normal operating conditions, compared with conventional hydraulic injection molding machines, energy savings of 20-80% can be achieved.
Molding stability of servo injection machine
Compared with conventional injection molding machines, repeatability is greatly improved due to servo motor closed-loop control.
Quick response of servo injection machine
Featuring a dynamic servo motor with a response time of only 0.05sec.
Quiet operation of servo injection machine
The machine runs at much lower noise levels, particularly in low speed applications.
Reliable holding pressure of servo injection machine
Compared with traditional hydraulic machine the holding pressure is more stable and does not have limitation.
Better oil temperature stability of servo injection machine
The servo system only delivers hydraulic oil as it is needed for the various functions. This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
16-cavity compression molding machine:
Type JF-30BY (16T)
Quantity of mold head 16
Capacity 9000-11000pcs/hr
Cap diameter 22mm-45mm
Cap height 10mm-25mm
Power of heating ring of the extruder 11KW
Power of electromotor of the extruder 4.5KW
Power of electromotor of the molding press machine 1.1KW
Power of hydraulic pressure 7.5KW
Power of cooling system 3KW
Air consumption 6kgs, 0.5m3/hr
Power,Voltage 380V,50HZ
Weight 2500kg
Size 2700, 1150, 2100mm
24-cavity compression molding machine:
Type JF-30BY (24T)
Quantity of mold head 24
Capacity 15000-18000pcs/hr
Cap diameter 22mm-45mm
Cap height 10mm-25mm
Power of heating ring of the extruder 11KW
Power of electromotor of the extruder 7.5KW
Power of electromotor of the molding press machine 2.2KW
Power of hydraulic pressure 11KW
Power of cooling system 3KW
Air consumption 6kgs, 0.5m3/hr
Power,Voltage 380V,50HZ
Weight 3800kg
Size 3500,1400,1900mm
36-cavity compression molding machine:
Type JF-30BY (36T)
Quantity of mold head 36
Capacity 27000-30000pcs/hr
Cap diameter 22mm-45mm
Cap height 10mm-25mm
Power of heating ring of the extruder 19KW
Power of electromotor of the extruder 15KW
Power of electromotor of the molding press machine 3KW
Power of hydraulic pressure 18.5KW
Power of cooling system 3KW
Air consumption 6kgs, 0.5m3/hr
Power,Voltage 380V,50HZ
Weight 5200kg
Size 5500,3500,2200mm.
All pneumatic valve, voltage stabilizing filter, governor valve, windpipe tie-in, windpipe, gas meter, vacuum generator etc. adopts world most well-known FESTO, guaranteed that the pneumatic controlled system operate accurately and the component durable.
Have the function of grip, embrace, blow, suction, cut etc. External connection with carry on platform, conveyor belt, and middle board check group, spray device, cut runner device.
Special standard features of SCY injection molding machines :
1. Five-point vertical toggle system combined with one piece fabricated machine bed, ensures machine strength and durability even under high speed production.
2. High rigid T-slot platen made of FCD500, eases process of mold mounting and withstand fatigue of platen.
3. Oil less bearing improves machine cleanliness with less use of lubricant.
4. Double injection cylinders design assure injection consistency.
Special features of SCY Thermosetting injection molding machine :
1. Barrel special treated with excellent low temperature control and heater made of aluminum alloy to ensure barrel temperature consistency.
2. Platen is enclosed with heat insulation board made of asbestos helps to increase production efficiency.
3. Suitable for Thermosetting plastic material, such as bakelite, phenolic, urea and etc.
Special features of SCY Hydraulic Clamping Injection Molding Machine :
1. Central direct clamping mechanism combined with double injection cylinders system presents accurate clamping pressure and quick mold close.
2. Long mold opening stroke and less restriction on mold thickness make it flexible for mold applications.
3. Clamping force distributes evenly to the mold and the platen, minimizes stress and wear on machine.
Special features of SCY Accumulative high-speed injection molding machine:
1. Specialize in production of thin-wall items and high speed injection.
2. Close loop injection equipped with servo valve to further enhance injection precision.
3. Higher productivity available with double loops system (injection pressure charge during holding pressure/screwing).
Special features of SCY PET preform injection molding machine :
1. Specialize in processing PET material.
2. Capable to supply complete system integration, including PET preform injection machines, PET preform mold with hot runner and temperature control, ancillary equipments from material drying and feeding to preform cooling and automation.
