We mainly produce extruders for profiles, pipes, sheets and boards. Double screw extruder has a series: sjsz45, 55, 65, 80 and 92. Single screw extruder has a series: sj25, 30, 45, 65, 90, 120 and 150. All extrusion line adopts infinite speed variation by frequency converter, overload protection, trouble alarm, constant oil temperature in screw, oil cooling in barrel and the devices of vacuum exhausting as well as fixed quantity feed.
The electric parts are from world famous brand, such as simens, omron, mitsubishi, abb, lg and rkc.
The sprue bushing is often used with locating ring, and it is a plastic component which is used to let the melted plastic materials go into the inside runner through the mouth.
Applicable for use in the production of:
Daily use and accessories for electronic products
Mail features:
Structural components are used hydraulic pressure system instead of straight conventional mode-locking hinge structure. Greatly reducing the mainframe space.
Direct pressure and no-step clamping, less noise and pollution and long life.
Advanced integrated control adopted on the mainframe, making every parameter digital.
The electronic proportion-typed energy-saved pressure and flux hydraulic pressure system adopted on the liquid pressure system, so it has the features of saving energy, high speed and low maintain cost.
Open and clamping mould using computer optimization design.
High-speed mold clamping and low-speed pressurizing, fast mold opening, which make the speed of opening and clamping the mould expedite, fast and balanced.
The injection volume and the clamping itinerary is monitored by high-precision electronic device.
Horizontal design, the compact and precise whole structure, which are appliable for lesser working space.
Daily use and accessories for electronic products, also apply to the silica products with tessera, such as silica insole, silica watch band, and silica keypad for mobile and etc.
Mail features:
1. Structural components are used hydraulic pressure system instead of straight conventional mode-locking hinge structure, greatly reducing the mainframe space.
2. Direct pressure and no-step clamping, less noise and pollution and long life.
3. advanced integrated control adopted on the mainframe, making every parameter digital.
4 The electronic proportion-typed energy-saved pressure and flux hydraulic pressure system adopted on the liquid pressure system, so it has the features of saving energy, high speed and low maintain cost.
5. Computer optimization design adopted on the mould demolding and clamping.
6 High-speed mold clamping and low-speed pressurizing,fast mold opening, which make the speed of opening and clamping the mould expedite, fast and balanced.
7 The injection volume and the clamping itinerary is monitored by High-precision electronic device.
8. Horizontal design, The compact and precise whole structure, which are appliable for lesser working space.
1. Structural components are used hydraulic pressure system instead of straight conventional mode-locking hinge structure. greatly reducing the mainframe space.
2. Direct pressure and no-step clamping, less noise and pollution and long life.
3. Advanced integrated control adopted on the mainframe, making every parameter digital.
4. The electronic proportion-typed energy-saved pressure and flux hydraulic pressure system adopted on the liquid pressure system, so it hasthefeatures of saving energy, high speed and low maintain cost.
5. Computer optimization design adopted on the mould demolding and clamping.
6. High-speed mold clamping and low-speed pressurizing,fast mold opening which make the speed of opening and clamping the mould expedite, fast and balanced.
7. The injection volume and the clamping itinerary is monitored by High-precision electronic device.
8. Horizontal design, The compact and precise whole structure, which are applicable for lesser working space.
Wooden ark
1875 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
Mainly apply to infant products, daily use products, medical products, and electronic products and so on, such as silica nipple, baby teeth products and oxygen mask and keypad and so on.
Main features:
1. The injection part is rebuilt from ordinary injection machine, high-precision PC computer control system developed by our own company adopted on the controlling part.
2. Liquid pressure and direct pressure adopted on the injection, the speed of the injection very fast, the pressure is up to 200 ton.
3. Advanced integrated control adopted on the mainframe, making every parameter digital.
4. The electronic proportion-typed energy-saved pressure and flux hydraulic pressure system adopted on the liquid pressure system, so it has the features of saving energy, high speed and low maintain cost.
5. Opening and clamping mould using computer optimization design.
6. High-speed mold clamping and low-speed pressurizing,fast mold opening, which make the speed of opening and clamping the mould expedite, fast and balanced.
7. The injection volume and the clamping itinerary is monitored by High-precision electronic device.
Ltem ltem machine model unit hsg-1250
Injection Unit Screw diameter mm 42 íííí45
Theoretical shot capacity mm3 242íííí 278
Max.injection pressure Mpa 169íííí 147
Injection rate g/s 100íííí 130
Plastcization capacity g/s 17.5íííí 19.5
Screw speed r.p.m 0-180
Clamping Unit Locking force KN 1250
Stroke of moving platen mm 355
Min.mould thickness mm 130
Max.mould thickness mm 430
Space between tie-bars mm 410í-355
Hyd ejector force KN 32
Hyd ejector stroke mm 125
General Pump power KW 11
Heating power KW 7.5
Oil pump capacity L/min 83
Oil tank capacity L 260
Size(Ií-Wí-H) m 4.3í-1.05í-1.75
Machine weight t 3.4
Size(Ií-Wí-H) m 4.3í-1.05í-1.75
Machine weight t 3.4
Just packed in container
This item is our patent product, patent no.: 200720047177.2.
Our products are used on classification-record, e.G. Profiles, contents, notebooks,
Premium papers and so on.
When using the product, users only take away the bottom of the white paper and then
Stick in the edge of the thin page.
The hollow spaces insert "writing card" which is the content classification.
Attachments: 12 plastic indexes, 14 writing cards and 1 brochure
This machine, controlled by plc with the a touch screen human-computer interface features stable performance, simple manipulation and easy adjustment. It specializes in welding the latasutures of aluminum-plastic and plastic laminated tubes with speed and cosmetic perfection. When welding aluminum-plastic laminated tubes, the machine can cover entirely the exposed aluminum foils, ensuring the quality of fillings over a long period of time. This machine is widely used in the production of packaging tubes of toothpaste, food, drug, cosmetic and other types of pastes or latex products.
The tt-80 laminate tube making machine (shown in the photo) is the tube processing equipment of the new generation which we have developed by integrating up-to-date foreign tube manufacturing technologies. With this single production line, we can weld both aluminum-plastic laminated tubes and all plastic laminated tubes, and can also cut tubes of all types according to color code or length.
AS a manufacturer and exporter, NANO-GLO is specialized in daylight fluorescent pigment. We have successfully developed following product series for various industries:
AS series - Fine particles,Low cost,Multi-applications
PS series - Upgraded, Multi-applications
FA series - Solvent type,Multi-applications
ZQ series - High temperature resistant & Formaldehyde-free!
1. AS SERIES - Recommended for wide range of applications; A-type gravure inks, vinyl plastisols, organisols, vinyl coated fabric, paper coatings, screen inks, paints, plastics and crayons with melt temperatures less than 190 degree C.
2. PS SERIES - Recommend to use in applications of polar gravure inks, PVC plastisols, paper coatings, PVC screen inks, crayons.
3. FA SERIES - Recommend to use polar solvent systems, paint, PVC screen inks, and PVC plastisols that contain cyclohexanone and other strong polar solvent systems, also useful in water based latex systems where long term shelf-life is required.
4. ZQ SERIES - High temperature resistant & Formaldehyde-free! Lower mold plateout, melt-in, best tinting strength, superior brightness, increased plastic compatibility, fade resistant and excellent heat stability in injection molded plastics to compare with other thermoplastic fluorescent pigment products. The maximum temperature in process is up to 300 degree C.
1) this whole production line is used to crush, wash, dewater and dry pp, pe film.
2) it takes the advantages of simple structure, easy operation, high capacity, low energy consumption, safety, reliability, etc.
3) this whole production line is automatic controlling, structure arrangement compact, high production efficiency, nice cleanness.
4) production capacity: 200-1000kg/h.
5) after drying the water content can reach 5-8% (according to the thickness of film).
1. Features and application:
1) the whole production line can be used to crush, wash, dewater and dry pet bottles.
2) it takes the advantages of simple structure, easy operation, high capacity, low energy consumption, safety, reliability, etc.
2. Features:
1) cleaned material: impurity content<=0.1%; water content<=3%
2) production capacity: 300-3000kg/h.
3) note: we can make the machine exactly according to your requirements.
1) double-ranks recycling & granulating system is mainly used to recycle and reprocess pe, pp waste plastic.
2) we use force feeding, as the screw can exclude air and steam. After plasticization and extrusion, the particles can have high density, nice surface, high output, stable extrusion. Customers can certainly adopt which feeder they like.
3) production capacity: 100-500kg/h.
4) these machines are for different customers to choice. And we could also design special material granulator line according to the customers' request.
Wooden cases or other fix methods
1875 Injection Moulding Machinery Suppliers
Short on time? Let Injection Moulding Machinery sellers contact you.
