Make: JSW
Model: J850EII
New : 1998
Specfication:
Screw Diameter: 100 mm
Injection Pressure: 1,730 kg/cm2
Theoretical Injection Capacity: 3,788 cm3
Injection Weight (PS): 3,429 g
Injection Rate: 840 cm3/sec
Plasticizing Capacity (PS): 470 kg/h
Screw SpeedHigh Torque: 75 rpm
Low Torque: 150 rpm
Nozzle Output: 50 mm
Injection Head: Open Nozzle
Cylinder Temperature Regulator : Cylinder 4, Nozzle 1
Clamping Method: Double Toggle
Clamping Force: 850 ton
Daylight: 2,300 mm
Clamping Stroke: 1,200 mm
Mold Thickness: 550 – 1,100 mm
Distance between Tie Rods (H x V): 1,060 x 1,060 mm
Platen Size (H x V): 1,560 x 1,560 mm
Ejector Method: Hydraulic Cross (29 points)
Ejector Force x Stroke: 23.1 ton x 200 mm
Mold Open/Shut Speed (Shut - Open): 67 m/min - 65 m/min
Pump Motor: 105 kW
Heater: 35.83 kW
Oil Tank Capacity: 1,360 L
Total Electricity: 143 kW
Machine Size (L x W x H): 11.0 x 2.5 x 2.6 m
Machine Weight: 43 ton.
Bh mold is engaged in medical device mould design, mold making and exporting.
Bh mold have rich experience in 3 way stopcock moulds making, normally 5 sets moulds for the three-way stopcock, the rich experience can ensure precision and competitive price.
We are professional for other medical devices components mould and plastic parts as following
A, components of infusion/ transfusion set
B. I.V. Catheter/cannula, fistula needle parts molds
C. Surgical disposables: prep razors, plastic forceps, umbilical cord clamps, vaginal speculums etc.
D. Plastic labware: petri dishes, test tube, specimen container, centrifuge tube etc.
Our production capability is not limited to tooling, injection, ultrasonic, printing, and packaging.
Ms-mold is a leading mold manufacturer in chang an town, dongguan china. We are professional with a wide range of odm & oem services, such as automotive, home appliance, medical & communication, office automation devices, aeronautics, iml & imd, precison parts(including gear, insert parts, precision connecter) and mold components etc.
Special drying chicken manure machine produced by our company is highly efficient, energy-saving new products; the project is applicable to large and small farms, aquaculture in more developed regions.
The machinery is divided into large and small.
Features:
1: high quality warranty: 7 years of experience of mold manufacturing;
2: high precision to satisfy customers needs;
3: specific processing according to customer's drawing;
4: high delivery speed: dhl for overseas and shunfeng express in mainland.
Captionuct
Informdiscription n
Brand name:
San qin
Oed&odm service
Accepted
Material
Elmax, dc53, pd613, nak80/55, etc
Model number
Non standard
Size
Customized
Discharge precision:
¡¨¤0.003mm
Hardness:
58-60 hrc
Raw material:
Japan , sweden, and germany
Grinding angle clearness:
Ra<0.03
Edm angle clearness
Ra<0.05
Grinding precision:
0.002-0.001 mm
Delivery time:
Normally within 7 days (according to customer¡¡¥s drawing quantity and material special case will be sooner
Moq:
1 piece
Price:
Varied according to the processing procedures
Package:
Inner packing with recycle plastic box and anticorrosive oil, outer with sponge and pe bag
Supply ability:
1000 piece/pieces per week
Cooperation customer:
North america, japan, southeast asia
Inner packing with recycle plastic box and anticorrosive oil, outer with sponge and pe bag
Yineng precision mould(shenzhen)company was established in july 1999, w.It is a comprehensive enterprise that engaged in plastic mould design & producing, plastic product production and processing service.
The mold product produced are included:automobile, electric appliance, tele communication devices, home appliance, medical instrument, toy etc.We are production that have injection molding, double injection mould, 2 shot mould, rapid prototyping, over mould, die-casting mould, and the bmc mould, mud mould, the dme specification of mud mold, and the piece of the hasco specification mould.
Yineng precision mould(shenzhen)company was established in july 1999, w.It is a comprehensive enterprise that engaged in plastic mould design & producing, plastic product production and processing service.
The mold product produced are included:automobile, electric appliance, tele communication devices, home appliance, medical instrument, toy etc.We are production that have injection molding, double injection mould, 2 shot mould, rapid prototyping, over mould, die-casting mould, and the bmc mould, mud mould, the dme specification of mud mold, and the piece of the hasco specification mould.
2. Equipment capabilities
1). width of raw materail : 60mm- 860mm
2). Product speed by punching: 2.5-5m/min
3). Continuous roll forming speed: 10-15m/min
4). Material thickness: 1-2mm
5). Material require: Q235 cold roll steel
6). Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.
3. Main composition of machine
This unit consists of the decoiler, ML900 flatting, 200 punch, punching die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, electrical control cabinet; etc.
4. Each part major technical parameters
4.1 Drive decoiler
1). Material width 860mm
2). Material weight 6000kg
3). Material outer diameter 1200mm
4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor
5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever.
4.2 Flatting
1) Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls.
2) Flatting bound: Material thickness 1-2mm, material width 100-860mm
3) Drive power: 5.5kw frequency conversion electromotor
4) Speed reducer model: ZQ250
5) Flatting speed: 3-10 m/min
6) Parenthesis up and down a pair of fortified wheel
4.3 Continual punching mould
1. Amount: Each kind of width specification 1 set dies, total 6 sets
2. Die require: Cr12 quench
4.4 Servo feeding
1. electromotor power: 4.4kw
2. Multistage type feeding, memory ten group of memory functions
3. Man-machine contact surface numerical control system
4. Uses Mitsubishi servo meter
4.5 Holds material (use in cushion section)
The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing
4.6 Guider
A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets.
4.7 Main roll forming machine.
Type
GY180(Extra wide)
Rack structure
Dragon Gate type memorial arch frame
4.9 Electrical control
4.9.1 Main operation control cubicle
1) Amount: 1 set
2) Frequency conversion: 3 sets(in main control cubicle, control decoiler, flatting and roll forming machine)
3) PLC control: 1 set
4)8 inch liquid crystal touch screens
5) All electrical element is the Mitsubishi original installation brand
4.9.2 assistant control cubicle
Amount: 3 sets (follow decoiler, flatting, roll forming machine)
Control type : Manual handle
5. After-sale service
1. We see to the equipment's installment, the debugging and free training operators
2. We offer the equipment's details(including the drawing of roll forming mould, Electric appliance schematic diagram, equipment diagram and so on).
Naroto is rotational moulding machine manufactruing and supplier company based in india, we are also export plastic moulding machines, rock n roll machineservices in India.
Product id: tec series
1. The injection molding robot-mini traversing robots are extensively applied to plastic injection molding machine 50t ~ 150t.
2. The mini traversing robots can rapid take out the runners, sprues and find products from the mold of plastic injection molding machine.
3. The mini traversing robots can achieve factory inline automatically system.
Dialog controller, easy to control
1. The control system meets ce, spi and euromap standards, which is compatible with injection molding machines all over the world.
2. Remote controller with the lcd display for easy reading. The screen capacity is 100 chinese characters.
3. Choice of english / chinese displays on screen.
4. 16 bit dual cpu provides powerful editing functions for deletion, insertion and replacement.
5. The program copy function, in conjunction with the edit and modification function, provides easy program editing and modification.
6. 60 sets standard programs combined with 40 sets edit meets requirements for any type of mold.
7. Machine interface contains: mold clamp interlock, injection interlock, mold eject interlock, safety door control, product counting and cycle time.
8. Specially designed outside mold hold function suits extra high molds and molds with core cylinders. This prevents molds bumping against the robot.
9. Middle platen confirmation device (optional): a safety guard to prevent the middle platen bumping against the robot resulting from incorrect positioning of middle platen.
5558 Injection Moulded Products Suppliers
Short on time? Let Injection Moulded Products sellers contact you.
