Auto parts car front bumper mold plastic injection mold A car bumper is a safety device that absorbs and mitigates external impact and protects the front and rear of the vehicle body. Generally consists of plastic bumpers, cushioning materials and beams. Plastic bumpers have strength, rigidity, and decorativeness. From a safety point of view, a car can play a cushioning role in the event of a collision and protect the front and rear body. From the appearance, it can be naturally combined with the car body to form a natural One body, with good decoration, has become an important part to decorate the appearance of the car. 1: Determination of bumper shell material Regulatory requirements: The front and rear protection devices of the car must ensure that the vehicle will not cause serious damage to the vehicle when a light collision of 4km / h occurs. In addition, the front and rear bumpers not only protect the vehicle and reduce vehicle damage, but also protect pedestrians and reduce the injuries to pedestrians in the event of a collision. Therefore, the shell material of the bumper should have the following characteristics: 1) With less surface hardness, it can reduce pedestrian injuries; 2) Good elasticity and strong resistance to plastic deformation; 3) Good vibration damping effect, can absorb more energy in the elastic range; 4) Resistant to humidity and dirt; 5) Has good acid and alkali resistance and thermal stability. Modern car bumper shells are mostly made of plastic or fiberglass. In order to reduce the cost of trial production, save mold production costs, and also shorten the trial production cycle, in the concept car trial production, consider using FRP glass fiber reinforced epoxy hand lay-up process. The materials of the bumper are generally PP + EPEM + T20 or PP + EPDM + T15. EPDM + EPP is also more versatile. ABS uses less and is more expensive than PP. The thickness of the bumper is usually 2.5-3.5mm, and the gas-assisted molding can be made thinner. Note that if the bottom mesh of the bumper is integrated with the bumper, the thickness of the mesh must be more than 2.0mm, and the die angle should be increased as much as possible (2 degrees or more). If the mesh is separate, the mesh wall of 1-1.5mm is sufficient.
Plastic injectin large plant pot mould Mould Name: Plastic Flower Pot Mould Mold category: injection mold Core/cavity steel material: 718. Mold material can be customized according to customers. Polishing requirements: mirror polishing of the product, or surface treatment such as skin texture, sandblasting, etc. according to customer requirements. Pouring method: single point hot runner Plastic material: PP Mold cavity number: one out one Demoulding method: ejector pin. Mold life: 500,000 times After the plastic raw materials pe or pe are mixed, they are heated and melted by an injection molding machine and injected into the plastic flowerpot mold under high pressure, cooled and molded, and taken out by a robot to become a semi-finished product. Some can be sold directly, and some require printing . There are many shapes of plastic flower pots, which can be divided into round, square, and oval. Plastic flowerpots can be watered many times, and it has better drainage. Many people now choose plastic flower pots for planting potted plants. There are many plastic flower pots that are multi-functional. If you are interested in our products and services, welcome to contact us. We can provide you with more information about mould and the whole production line service.
Plastic flip top cap mould The existing plastic flip cover with an anti-opening protection structure is generally made of polypropylene to ensure the folding performance of the flip hinge. Limited to polypropylene, it has good toughness and can withstand a certain degree of deformation without being damaged. Therefore, most polypropylene anti-opening protection devices can withstand a certain deformation, and the anti-opening protection function is weak, and some consumers can Open the cover when the anti-opening protection structure is destroyed. 1. There is an annular leak-proof ring on the inner wall of the top of the bottle cap; 2. The lower end of the bottle cap is connected to an anti-theft ring through a tensile rib; 3. At the same time, there are a number of sheet-shaped gyroscopic tension wings evenly distributed on the inner wall of the anti-theft ring The bottle cap designed in this way has the characteristics of strong sealing, good leakage resistance and anti-theft performance, safe and convenient use, can effectively prevent the liquid in the bottle from being contaminated by bacteria, and can ensure that various beverage packages meet the national health standards. filp top cap Product Name Plastic flip top cap mould Cavity&Core Stee P20H,718H,2738H,S136,H13 etc. Product Material PP,HDPE,LDPE etc. Mould Base LKM,ISM,HASCO,DME Cavity Single/Multi-cavity Mould life 500,000 ~1million shots runner type cold/hot runner Delivery time 30~60day
Plastic thin wall food container packaging box mould Mould Base LKM Standard, HASCO Standard , etc. Mould Material P20/718/738/NAK80/S136/2738/2316/H13, etc. Moud Precision +/-0.01mm Mould Life 50-500K shots Mould Cavity Single cavity, multi-cavity Runner System Hot runner and cold runner GateType Pinpoint Gate, Edge Gate, Sub Gate, Valve Gate, etc. Equipment CNC,EDM,Cutting off Machine,plastic machinery,etc Plastic Material PA6,PA66, ASA, POM, PPS, ABS,ABS+GF,ABS+PC,POM(Derlin),PP, etc Surface Treatment Polishing,Painting,Chroming,Anodizing, Quanlity System ISO 9001: 2019 Plastic packaging container refers to a container made of plastic raw materials for packaging articles. With the rapid development of petrochemical industry and the rapid development of the plastic industry, plastic packaging containers have replaced packaging containers made of metal, glass, ceramics, wood and other materials in many aspects, showing strong vitality. â? According to the nature of the raw materials used, there are mainly polyethylene, polypropylene, polystyrene, polyvinyl chloride, polyester, polycarbonate and other containers. According to the classification of container molding methods, there are mainly blow molding, extrusion molding, injection molding, stretch molding, rotational molding, vacuum molding and other containers. Classified according to shape and purpose, there are mainly plastic boxes, plastic barrels, plastic bottles, plastic bags, plastic hoses, etc. We will meet your needs in tooling builds and injection molding, rapid scale up ramps for initial market launch, and full-scale manufacturing. Our focus is on innovative products and specialized in shortening the time between development time and manufacturing for our customer.
Plastic bobbin coil mold Product Plastic Wire Coil Mould/Spool Bobbins Mold Mould Base LKM,HASCO,DME Cavity/core material 2738,2343,S130,2344,718,8407,S136,P20,KD-61,NAK80... Cavity QTY Single-cavity Runner cold/hot runner Gate Submarine gate,side/edge gate Mould lifetime 1,000,000 shots Plastic material PP,PE, .etc Lead time 25-40days based on different products Package Wooden cases Port Ningbo/Shanghai Design software UG/CAD/PROE 1.Specialized in manufacturing plastic injection mould and Plastic Wire Coil Mould 2.Good quality Plastic Wire Coil Mould 3.Competitive price 4.Creative Design 5.High precision Plastic Mould 6. Good after-sale service 7. Punctual delivery time
Plastic Baby Chair Injection Mould Product Description 1.Make automatic ejection. Customized designs are accepted. 2.Mould steel: P20 German or Customized 3.Steel hardness: HRC 28 to 33 4.Injection system: hot runner 5.Ejector system: ejector pin 6.Cycle time:30 shots 7.Mould lifespan:1.000.000 times ratten chair ratten chari plastic mould Our Services Good steel with high hardness Good polish with high brightness Good machining with high precision
Name Fico Open Hot Runner FS2097- Rubik's Cube Top Cover Material PC(Shrinkage:0.5%) Product Size 73*47*61 Cavities Material 8402 Cold Runner/Hot Runner Open Hot Runner Turns Into Latent Glue Mould size 750*450*546 Mould Weight 1200 Type Of Injection Moulding Machine HaiTian MA2800/1350 Production Status Already In Production Mould Completion Time 45Days
blow bar, wear parts, impact crusher
Blow bar is one of crucial wear parts on impact crusher. The good blow bars and right material options are so important to keep the crusher running safely and cost efficiently. only manufacture and supply versatile options for blow bars of many brands, also assist customers choosing the right option for right applications based on its long term experience in this industry.
vertical injection method is aimed at the characteristics of light weight, high injection pressure, mold size, and injection molding of various color materials.
Injection pressing machine is suitable for molding epoxy resin products. It used for motor and other industries.
sealing strip vertical injection molding machine without a guidepost, high pressure, and high-speed injection, more suitable for unique molding.
Injection blowing machine is suitable for molding hollow plastic products under 215 cm3, and involves many industries such as lighting, medicine, chemical industry, food, toys, daily necessities, tools and so on. And it has been widely used.
the umbrella manufacturing process for many years research, development of rib machine based on the forefront of the industry.
BMC injection molding machine is mainly used for injection molding processing of thermosetting material BMC.
Bakelite vertical injection molding machine (also called thermosetting bakelite injection molding machine) has the advantages of vertical clamping, vertical injection, and convenient embedding.
C-Type injection molding machine can match the characteristics of the embedded parts and the molding requirements, and match the skateboard type or the turntable type to increase productivity and improve efficiency.
Standard injection molding machine is suitable for meters, electronic parts, connectors, power cords, headphone cords, headphone plugs, headphone sockets, connectors, etc.
double sliding table injection machine. Application of double slide vertical injection molding machine: Mainly used in injection molding of inserts and suitable for small injection plastic parts without inserts.
single sliding table injection machine. A single sliding mold is added to the standard series to allow the machine to complete the cycle of sliding movement of the lower mold and the single slide plate.
