Features and Benefits Robust and compact design, high quality brass construction, valves have long life cycle. Thread in accordance with BS EN 10226(ISO7) or ISO228 Applicable Standards Connection standard: ISO228 Technical Data Nominal Diameter:DN15~DN50 (1 2"~2") Nominal pressure: PN 16 Temperature range: -5C ~ +85C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits Screw connection Self sealing design, low maintain cost Applicable Standards Connection standard: ISO228 Test standards: ISO 5208 Applicable Standards Connection standard: ISO228 Technical Data Nominal Diameter:DN15~DN25 (1 2"~1") Nominal pressure: PN 16 Temperature range: -5C ~ 85C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc.
Features and Benefits Combination Air Valves perform the functions of an Air/Vacuum Valve and Air Release Valves to maintain system efficiency and prevent pipeline surges. Able to release air at high flow rates. High sensitivity: when negative pressure occurs inside pipelines, valves rapidly open to inhale large volumes of air and protect the pipelines from damage. Floating ball and main disc are in stainless steel. This provides long service life, safety and reliability. Applicable Standards Flange Standard: EN1092-2 Design Standard: AWWA C512
DSJ-3015-1 Outdoor Climb Fall Protection D-Ring, Forged Steel Safety Bending D Ring Outdoor Climb Fall Protection D-Ring Forged steel,Heat treated 100% Proof loaded to 3600lbs/16kN Min. Breaking load: 5000lbs/23kN Net weight: 114g Meets or Exceeds: ANSI Z359.12-19 CSA Z259.12-16
A valve guide is a cylindrical piece of metal, pressed or integrally cast into the cylinder head of most types of reciprocating engines, to positively locate a poppet valve so that it may make proper contact with its valve seat.
We manufacture Brass Ball Valves as per customers requirements. Applications : Oil & Gas Industries Water Plants Petroleum Pipe Lines Types of Ball Valves Brass Male Ball Valve Brass Female Ball Valve Brass M/F Ball Valve Brass Mini Ball Valve Brass Female Ball Valve with Hose End Any other type of customized Ball Valve as per buyers drawing/sample.
Industrial ball valves for oil and gas
Full welded ball valves used in district heating system
4-200mm
3-300mm
0.17-300mm i
Forged Steel Gate Valve API 602 Gate Valve Flanged Raised Face NPT Or BSPT Ends  B.W Or S.W Ends Solid Wedged Type Bolted Or Welded Cover API 6D & CE Certified Forged steel gate valves Glofa produced which sizes are 3â?³(DN80) and smaller, compared with castings, forged valve bodies offer the advantages of more uniform structure, greater density, higher strength integrity, enhanced dimensional characteristics and closer dimensional tolerances.Forged steel gate valve Glofa offered have superior properties of heat preservation and cold preservation, the valveâ??s bore diameter are same as the pipelines and the medium flows in straight lines, resulting in that the resistance force are small and could prevent the heat losing effectively, this type valve are better choice for the fluid which is easy to solidify and with higher viscosity Glofaâ?? forged steel gate valve is with wedged type sealing structure, it is sealed by the wedge compressing on the seat, this sealing type make it possible unaffected by the pipeline pressure difference. The forged steel gate valve Glofa design are with self-cleaning structure, the fluid flow through the valve along on the sealing surface in 360 , which could eliminate the crash to the seat by the fluid in high speed, also flush away the dirties on the sealing surface.
Cast Steel Gate valves Glofa Supplied can be fully opened and fully closed to be used for cutting in the pipeline.The entire flow channel is a straight-through passage when the valve is fully-open, and the pressure loss is minimum.Gate valve is usually for working condition in which the valve is not opened or closed frequently, Itâ??s not suitable for adjustment or throttling. The most important feature of the cast steel gate valve of Glofa produced is that they can be ensured that the permissible leakage rate can be lower than that specified in API 6D and API 600, and the middle shaft sealing can pass the USA VOC leakage test. The wedged gate of the Glofaâ??s gate valve provides tight sealing even at low differential pressure. Grooved wedge guided and fitted by body, assures proper and consistent seal regardless of valve position, and also minimizes seat wear and damage, since seating surfaces of the wedge and seat are in contact during less than 5% of the total wedge travel.
We manufacture and supply a comprehensive range of Air Compressor Valve plates like ELGI 100 Dia, ELGI 60 Dia, Kirloskar CR105, 90Ds, 100Ds etc for supply to OEM and as well as replacement market. We also manufacture valve plates as per customers requirement.
Back pressure valves are an essential component for enhancing the performance of chemical dosing systems.The back pressure valves we manufactured are suitable for use with a wide range of corrosive liquids and air. They come with diaphragms made of PFTE or EPDM and are available in various materials, such as PVC, PVDF, carbon steel, SS304, and SS316L. Our back pressure valves have an adjustable pressure range from 10Kpa to 31.5Mpa and are available with either thread or flange connections, which can be customized according to your needs.contact us for more details.
DN63 mining hydraulic ball valve with complete coal safety certificate. The price is beautiful, and all models of ball valves, three-way, straight, connectors, control valves, and high and low pressure rubber hoses are also available for sale.
Nominal Diameter: 1 1/2 inch to 20 Inch Nominal Pressure:150Lb 300Lb, PN10 PN16 10K. Material: Cast Iron, Ductile Iron, WCB, CF8, CF8M, CF3, CF3M,etc.
Nominal Diameter:2 inch to 60 inch (DN50 DN1500) Nominal Pressure:150Lb 1500Lb, PN10 PN150 10K 40K. Material: WCB, LCB, WC6, WC9, CF8, CF8M,CF3, CF3M, Bronze, CD4MCuN, 4A(SS2205)etc.
Nominal Diameter:2 inch to 80 inch (DN50 DN2000) Nominal Pressure:150Lb, PN6 PN16 10K 20K. Material: Cast Iron, Ductile Iron, WCB, CF8, CF8M, CF3, CF3M, F53, F55, 4A(2205Alloy), SS310, etc. Drive Mode: Manual, Pneumatic, Electric, Hydraulic, etc
Nominal Diameter: 2 inch to 52 Inch (DN50~DN1300) Nominal Pressure:150Lb 2500Lb, PN10 PN420 10K 40K. Material: Cast Iron, Ductile Iron, WCB, WC6, WC9, LCC, CF8, CF8M, CF3, CF3M, CN7M, 20Alloy, 4A(SS2205), Bronze C95800,etc. Drive mode: Handwheel, Bevel Gear, Pneumatic, Electric,etc
