Boiler tubes and pipes are strongly demanded in order to satisfy especially strict usage conditions, along with operational reliability. We conducts strict quality control in all processes, from steel-making to tube and pipe-making, and we have established the following quality assurance system. http://www.sellsteels.com/steel-pipe/SA213.html
Gas cylinder tube is one of seamless steel tubes, widely applied in our works and lives. Cheap prices and high quality is reasons why customers in over 30 countries and regions choose us. http://www.ansonpipes.com/product/Cylinders-Steel.html
Product Description: Extend Lines or Vacuum Bagging and Infusion Spiral Tubing is a resin infusion standard and is ideally suited for in-bag vacuum line extenders or resin feed lines. This tubing is often used in vacuum infusion to allow vacuum pressure to be easily dispersed around a part. To ensure resin flow is not impeded, we recommend wrapping tubing in nylon or polyester peel ply. Flexible vacuum infusion translucent plastic spiral tube for resin distribution of all types of thermosetting resins and for vacuum bagging processes. Resin infusion hose -- It is made of PE and used to provide a very free lowing channel through which the resin is distributed near the point where the resin is first fed into the composite. Spiral hose -- Resin flows freely through the center of the spiral tube, but just as easily out of the spirals in the side, allowing resin to be supplied all the way along an edge of the composite. Product Specifications: SW12: PE, ID9mm*OD12mm, 80 Celsius, 50m/rolls; SW12: PP, ID9mm*OD12mm, 120 Celsius, 50m/rolls; SW14: PE, ID11mm*OD14mm, 80 Celsius, 50m/rolls; SW14: PP, ID11mm*OD14mm, 120 Celsius, 50m/rolls; SW16: PE, ID13mm*OD16mm, 80 Celsius, 50m/rolls; SW16: PP, ID13mm*OD16mm, 120 Celsius, 50m/rolls; Product Features: *Low material cost. *PE material, strong tube wall makes the spiral tube not deformed under atmospheric pressure. Packaging Information: PE bag or carton Storage Method: Stored in a cool and dry place, and make sure not directly touch the ground or wall to avoid moisture. Do not remove the original packaging when store. Scenes To Be Used: Used in vacuum infusion and prepreg process.
The seamless tube for hydraulic cylinders, obtained from high quality cold drawn tubes, available in a wide dimensional range.
Datang Serrated Finned Tube,High frequency welded finned tube,Specializing in the production of finned tubes, can be designed, can make drawings.
Teflon (PTFE) heat shrinkable tubing, half hard, flame-retardant, can use for a long time under the high temperature of 200 deg. celius, almost resistant to all the oils and chemicals.
Dual wall adhesive-line heat-shrink polyolefin tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
Vulcanized fiber tube is manufactured by winding zinc chloride treated paper on making mandrel to the predetermined wall thickness. They are then going through puring, drying, rolling, grinding, and sanding processes to get desired inside and outside diameters. It has good physical properties, mechanical properties, dielectric strength, arc resistance, and arc-quenching characteristics. Because of its excellent machinability, vulcanized fiber tube can be sanded, knurled, spirally cut, threaded, lathed, and easily fabricated to various products.
ESP Cable Solutions Co.,Limited produce bare welded stainless steel tubing in different shapes, such as round, square and rectangle. In comparison with cold drawn seamless tubing, the lead time for bare welded stainless steel tubing is shorter. Due to different uses, it is also known as capillary tubing, capillary strings, control line tubing, chemical injection lines and hydraulic control line tubing etc. Our Capillary tubing is popular used in Oil & GAS well for applications including hydralically actuated surface-controlled subsurface safety valves, Chemical injection and Instrumentation. Its has higher strength, resistance to pitting, corrosion and chloride stress corrosion cracking. For injection applications, the tubing is self-supporting inside the production casing and facilitates the injection of chemicals to enhance production flow rate, inhibit corrosion and de-water. The condition of our capillary tube is good welded and good quality, bright annealed, one continuous length without butt welded joints, round in cross-section, surface of the tubing is smooth and free of scratches, every spool will be pressure testing and without leakage risk, high tensile strength and yield strength, good spools and packing neatly, longer service life. -- The corresponding product model 1/4 X 0.035 Duple X 2205 Recommend Packing: 5000ft/Spool, 10000ft/Spool, 15000ft/Spol, Max 33000ft/Spool (Continuous length without any butt welded joint)
Specification of Gastec Gas Detection System Detector Tubes/Gastec detector tubes 2HH Tube No.: 2HH Gas to be measured: Carbon dioxide (CO2) Measuring Range: 2.5-40% Shelf life: 3 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us . Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Specification of Gastec Gas Detection System Detector Tubes/gastec gas detector tube 4LK Tube No.: 4LK Gas to be measured: Hydrogen sulphide ( H2S) Measuring Range: 1-40ppm Shelf life: 3 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us. Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability . Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Specification of Kitagawa detector tubes/Kitagawa tube detector 120SB Tube No.: 120SB Gas to be measured: Hydrogen sulphide(H2S) Measuring Range: 1-150ppm Shelf life: 3 years (after production) We have more than 300 types of tube, for other tubes and specification details, please contact us . Product Description of Kitagawa detector tubes The Kitagawa Gas Detector Tube system is a complete sampling and analysis system for determining the concentration of hazardous gases and vapors on the spot. Kitagawa offers more than 300 types of detector tubes to detect a wide range of gases and vapors, in a multitude of concentration ranges from ppb to percent. Tubes are calibrated on a single pump stroke, and provide a direct reading of the gas concentration. Each detector tube is wrapped in a thin transparent film that guards against shattering of the glass tube and the dispersing of chemical reagent in the event of accidental breakage. Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stainis created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube. Applications of Kitagawa detector tubes Oil & Gas Pulp & Paper Fire Service Chemical Agriculture & Food Forensics Semiconductor Construction Law Enforcement Shipping Indoor Air Quality Homeland Security Our Competitive Advantage 1.As an old brand in gas detection and measuring, KITAGAWA has passed 68 years. 2.Certificate: ISO, SEI,EN1231 3.Price at least 5% Lower Than other competitors in China 4.Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days. 5. Technology Support: According to customerâ??s exact requirements, supply valuable solutions. 6. Service: your inquiry can be replied within 24 hours during working days.
Specification of Gastec Gas Detection System Detector Tubes/gastec air sampling tubes 131L Tube No.: 131L Gas to be measured: Vinyl chloride(CH2:CHCL) Measuring Range: 0.1-6.9ppm Shelf life: 2 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Specification of Gastec Gas Detection System Detector Tubes/gastec stain tubes 1DL Tube No.: 1DL Gas to be measured: Carbon monoxide (CO) Measuring Range: 0.4-400ppm Shelf life: 3 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Specification of Kitagawa detector tubes/Kitagawa stain tubes 120SD Tube No.: 120SD Gas to be measured: Hydrogen sulphide(H2S) Measuring Range: 1-60ppm Shelf life: 3 years (after production) We have more than 300 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Product Description of Kitagawa detector tubes The Kitagawa Gas Detector Tube system is a complete sampling and analysis system for determining the concentration of hazardous gases and vapors on the spot. Kitagawa offers more than 300 types of detector tubes to detect a wide range of gases and vapors, in a multitude of concentration ranges from ppb to percent. Tubes are calibrated on a single pump stroke, and provide a direct reading of the gas concentration. Each detector tube is wrapped in a thin transparent film that guards against shattering of the glass tube and the dispersing of chemical reagent in the event of accidental breakage. Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stainis created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube. Applications of Kitagawa detector tubes Oil & Gas Pulp & Paper Fire Service Chemical Agriculture & Food Forensics Semiconductor Construction Law Enforcement Shipping Indoor Air Quality Homeland Security Our Competitive Advantage 1.As an old brand in gas detection and measuring, KITAGAWA has passed 68 years. 2.Certificate: ISO, SEI,EN1231 3.Price at least 5% Lower Than other competitors in China 4.Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days. 5. Technology Support: According to customerâ??s exact requirements, supply valuable solutions. 6. Service: your inquiry can be replied within 24 hours during working days.
Specification of Kitagawa detector tubes/kitagawa distributors 177UR Tube No.: 177UR Gas to be measured: Water vapour-ultra low range(H2O) Measuring Range: 2-12LB Shelf life: 3 years (after production) We have more than 300 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Product Description of Kitagawa detector tubes The Kitagawa Gas Detector Tube system is a complete sampling and analysis system for determining the concentration of hazardous gases and vapors on the spot. Kitagawa offers more than 300 types of detector tubes to detect a wide range of gases and vapors, in a multitude of concentration ranges from ppb to percent. Tubes are calibrated on a single pump stroke, and provide a direct reading of the gas concentration. Each detector tube is wrapped in a thin transparent film that guards against shattering of the glass tube and the dispersing of chemical reagent in the event of accidental breakage. Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stainis created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube. Applications of Kitagawa detector tubes Oil & Gas Pulp & Paper Fire Service Chemical Agriculture & Food Forensics Semiconductor Construction Law Enforcement Shipping Indoor Air Quality Homeland Security Our Competitive Advantage 1.As an old brand in gas detection and measuring, KITAGAWA has passed 68 years. 2.Certificate: ISO, SEI,EN1231 3.Price at least 5% Lower Than other competitors in China 4.Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days. 5. Technology Support: According to customerâ??s exact requirements, supply valuable solutions. 6. Service: your inquiry can be replied within 24 hours during working days.
Specification of Kitagawa detector tubes/KITAGAWA gas detection system 201SB Tube No.: 201SB Substance to be measured: Chloride ion Measuring Range: 3-200ppm Shelf life: 2 years (after production) We have more than 300 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Product Description of Kitagawa detector tubes The Kitagawa Gas Detector Tube system is a complete sampling and analysis system for determining the concentration of hazardous gases and vapors on the spot. Kitagawa offers more than 300 types of detector tubes to detect a wide range of gases and vapors, in a multitude of concentration ranges from ppb to percent. Tubes are calibrated on a single pump stroke, and provide a direct reading of the gas concentration. Each detector tube is wrapped in a thin transparent film that guards against shattering of the glass tube and the dispersing of chemical reagent in the event of accidental breakage. Each detector tube is formulated with high purity reagents that absorb and react with the target gas or vapour being measured. A colorimetric stainis created that is proportional in length to the concentration. For most tubes, the concentration is read directly off the measurement scale on each tube. Applications of Kitagawa detector tubes Oil & Gas Pulp & Paper Fire Service Chemical Agriculture & Food Forensics Semiconductor Construction Law Enforcement Shipping Indoor Air Quality Homeland Security Our Competitive Advantage 1.As an old brand in gas detection and measuring, KITAGAWA has passed 68 years. 2.Certificate: ISO, SEI,EN1231 3.Price at least 5% Lower Than other competitors in China 4.Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days. 5. Technology Support: According to customerâ??s exact requirements, supply valuable solutions. 6. Service: your inquiry can be replied within 24 hours during working days.
Specification of Gastec Gas Detection System Detector Tubes/gastec colorimetric tubes 7LA Tube No.: 7LA Gas to be measured: Phosphine(PH3) Measuring Range: 0.05-9.8ppm Shelf life: 2 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Standard & Grade :ASTM A179 Boiler tube Ends:Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends Delivery state: Annealed, normalized, tempered. surface oiled, black painted, shot blasted, hot dipped galvanized. Packing:Bundle or bulk , wooden case or other seaworthy packing or for the client's requirement
