Product type:flexible packing film Gauge available:12um, 18um, 28um, 36um Width available:500mm-1200mm Length available:600m-12000m. Cartons, wood pallets.
Rigid pvc film Gauge available:80um-800um Width available:200mm-1000mm Length available:6000m-12000m Different colors are available, the films are high transparency, they can be used in pharmaceutical packing, food packing , gift packing...Etc. Wood pallet or carons.
Product Name: DF09-01 Insulation Butyl Tape for Communications 1. Product Description: It's free shaped and durable used. Serve as excellent moisture seal for cable and duct using in conjunction with PVC electrical adhesive tapes. Usage temperature: -55 to 90 Operation temperature: -18 to 55. 2. Application: Provide simple and quick seal, repair and insulation for the waterproof targets. 1) Keep waterproof and sealing of joints for communication equipments such as base stations, antennas and feeders. 2) Provide insulating and waterproof of overhead insulated wires. 3) Repair the jackets of communication cables. 3. Specification: 600mm*63mm*3mm; 600mm*63mm*1.5mm Color: Black. Packing: Cartons.
Product Name: DF69 Sealing Butyl Tape for Car Doors and Windows 1. Description: DF69 sealing tape is non-curing lifelong with excellent water resistance and weather resistance. Suitable for sealing of different car windshield glasses, doors and windows. 2. Application: Sealing and bonding of waterproof membranes of car doors, windows and speaker grilles. 3. Color: Standard color is black. Different specifications provided according to customer demands on thickness, width, length and colors. 4. Basic performance: Appearance of black ribbon. Support viscous 50min Heat resistance: 80 degrees Celsius for 2 hours, there is no flowing, cracking and deformation. Low temperature flexibility: -40 degrees Celsius, with no cracks. Shear state of adhesion 2.6N/mm Peel strength 0.8N/cm.
Product Name: DF802 Butyl Tape for Automotives (High Viscosity Sealing Tape) 1. Product Description: It is non-curing double-sided waterproof sealing tape with high viscosity. Bonded almost all the irregular surfaces because it has excellent performance on shaping. Be good at resistance of corrosion and moisture. Do well in anti-water, anti-acid, anti-alkali and anti-aging. 2. Application: Used in automotive, electronics, refrigerated trucks, containers and etc., sealing for airtight and watertight structures. 3. Specification: 3mm*8mm*7m Color: Black; Gray. Packing: Cartons.
Material:PE(Excellent raw material) Supply period:All the year around If you are interested in this product, please as follows: 1. Customized structure, size and printing designs are welcome. 2. Please advise the material, thickness, size, printing color, style and quantity you prefer and other requirements, we will give you the best price. 3. The picture relevant to the products have been provided for reference only. We don’t have any intellectual property rights over the trademarks on display, and are not selling any product containing these trademarks. 4. We can make according to your requirement. The standard lot size , weight , dimensions may have custom-made according to the customer request.
Product Name: DF01-1 Waterproof Butyl Tape for Steel Structure (Double-sided Waterproof Sealing Butyl Tape) 1. Product Description: DF01-1 is a self-adhesive, non-curing, double-side waterproof sealing butyl tape. Excellent weather resistance, aging resistance, and waterproof. It has strong adhesion of steel, glass, concrete, PC board and other material surfaces, which has the functions of sealing, shock absorption and protection for them. 2. Features: (1) It could withstand certain deformations for it follows well with non-curing lifelong. (2) It has UV-resistance and can last up to 20 years. (3) It has good resistance to chemical corrosion, acid and alkali. 3. Application: (1) The overlap between color steel plates and lighting panels of metal roofing. (2) Sealing and waterproof of doors and windows, concrete roofs and ventilation pipes. (3) For installation of PC boards and polycarbonate panels. 4. Specification: 2mm*10mm* N mm and so on. Packing: Cartons. Color: Black, Gray, White. Cartons.
Thickness: 0.38mm/0.45mm/0.76mm/1.14mm/1.52mm Light Transmittance: 88%. Carton/Wood Box custom to order.
Smart film also called pdlc film (polymer dispersed liquid crystal film) which is a kind of high-tech product can switch from transparent to opaque instantaneously under electricity application. The smart film is transparent when power on and it is opaque when power off. It can be regulated and adjusted the light transmittance pass through the film by electricity supply. 1200*3000mm.
Smart film also called pdlc film (polymer dispersed liquid crystal film) which is a kind of high-tech product can switch from transparent to opaque instantaneously under electricity application. The smart film is transparent when power on and it is opaque when power off. It can be regulated and adjusted the light transmittance pass through the film by electricity supply. 1200*3000mm Max size.
Smart film also called pdlc film (polymer dispersed liquid crystal film) which is a kind of high-tech product can switch from transparent to opaque instantaneously under electricity application. The smart film is transparent when power on and it is opaque when power off. It can be regulated and adjusted the light transmittance pass through the film by electricity supply. 1200*3000mm.
Smart film also called pdlc film (polymer dispersed liquid crystal film) which is a kind of high-tech product can switch from transparent to opaque instantaneously under electricity application. The smart film is transparent when power on and it is opaque when power off. It can be regulated and adjusted the light transmittance pass through the film by electricity supply. 1200*3000mm.
Special adhesive film is made from the mixture of some petrochemicals. It makes full use of the permeability of this substance to penetrate into the micro-pores of the surface of the objects , and the characteristics of its cohesion to adhere tight to the objects . It is characterized by : (a)Can be attached tight onto the surface of the objects . (b)Can carry the weight . (c)Waterproof and can withstand high temperature -10¢J--80¢J . (d)Is very easy to be peeled off . (e)Environmental and economical , can be reused for a great number of times (but should be noted that the surface of the objects and films are both clean before pasting). In fact , the film can be used in a very wide range , such as : adhesive tape (single or double side), passes, stationery, childrens toys, printing posters, billboards.etc , and so on . Wherever in the kitchen , bathroom, bedroom , office , exhibition places and even in the freezer, film can be fully used . If we can make the most of our imagination and creativity, the film can practically make our daily life more convenient and comfortable . 21cmX31cm/piece.
Cf01 are series of decorative self adhesive films which are used three-dimensional textured vinyl that reflects light the same way as real carbon fiber parts to imitate the real carbon fiber effect. It is comprised of color textured vinyl with clear permanent adhesive and pe coating silicon release paper. Depend on your orderquantity, 150um*1.52m*50m/roll.
1. Advantage * Economical type, money saving, * Short term outdoor using. 1~1.5years * Soft film, good uneven holding ability Specification: Vinyl thickness Liner Width Length INK 80 micron 120g/m2 paper 0.914/ 1.06/1.27/1.37/1.52m 50m Solvent, eco, UV 2. Use area HK102 is intended for making graphics in the following area * Body of car, bus, truck, subway sign graphics * Flat wall body * Other flat substrates such as foam board, banner sheet 3. Limitation This type is not recommended for the following applications: * High substrates light block area * Dirty, solvent cleaned, grease, silicon coating which affect the adhesion of the glue. * Lacquered or painted surfaces freshly. The dried lacquered must be tested by user for compatibility 4. Temperature ranges Minimum application temperature > 9XC Service temperature range - 15XC to~ 70XC 5. Shelf life: 1 year in material's original packaging, storage temperature of 15-22 deg C. (80-100)um*(0.914,1.06,1.27,1.37,1.52)m*50m/roll.
Advantage * Suitable Solvent, ECO ink printing * 180g rigid high weight art paper, easy for lamination and field installation. * Soft vinyl (28Pa hardness) is suitable for arched glass surface. * Strong adhesion, anti-wind, anti UV. * Complete removable glue, no glue leaving behind the window after using Specification: Hole Ink diameter Open rate Film thickness with glue Liner Paper Width Solvent ECO UV 1.6mm 40% 150micron 180g art paper 1.27 / 1.37 /1.52m Yes Yes NO 2. Use area GK1001 film is intended for making graphics in the following area * Window of car or bus sign graphics * Building window for sign * Interior glass sign faces * Other transparent substrates such as transparent acrylic, polycarbonate 3. Limitation This type is not recommended for the following applications: * The surfaces of substrates are dirty, solvent cleaned, grease, silicon coating which affect the adhesion of the glue. Great K2 Industry Co., Ltd R & D Center - 2 - * The glass has built-in heating, defrosting elements or wipers * Restrict the safe operation of emergency window exits 4. Temperature ranges Minimum application temperature > 9XC Service temperature range - 25XC to + 75XC 5. Shelf life: 2 year in material's original packaging, storage temperature of 15-22 deg C, relative humidity of 50¡ã55%. 6. Durability: 1 year in outdoor solution. But it also depends on printing method and ink. Correct substrate preparation and maintenance of vinyl will enhance durability. 7. Technical data Composition High gloss vivid white/black vinyl Thickness with glue 150 Film micron Shrinkage after application ¡Õ1.1% Adhesive Type Clear Acrylic Solvent, pressure sensitive Removable ability Removable Adhesive Thickness 0.02¡Ó0.003 mm Adhesion 2.4 pounds/inch (Acrylic and uncoated, clear polycarbonate) 180 degree pull back testing. Type Rigid PE coating silicon art paper Weight 180g/m2 Release force 40g Liner SA rate >85% Salt water testing 100h/23XC no variation. 150um*(1.27,1.37,1.52)m*50m/roll.
Super clear and glossy BOPP film with single/both side (s) corona treated. It is widely used in packaging industry such as printing, lamination and Aluminum metallization. Featuring : Super high transparency and glossy, Super high tensile strength Super high grease barrier, Excellent ink and coating adhesion Low static electricity, Superior thickness uniformity Smoothness of the vertical section and much compact of film rolls winding Specifications Thickness: 12-75 micron Width:350-1600 mm Length: 4000m ,6000m ,7000m, 8000m Color: Transparent (clear). Packing: Use carton & pallets or as customers requirements.
BOPET film (biaxial oriented Polyester films) featurines good thermal stability and tenacity; low air and water permeability; applicable to vacuum aluminum plating, compound package, cooking bag manufacture, etc. Featuring : Having the good adhesion with ink and coating, can be used for multi-color printings with good flatness. Is mainly used in heat-sealing bags of frozen food, industrial products and cosmetics packaging. Specification: thickness: 12 microns-25 microns, 75 microns-150 microns ,185 microns-380 microns, 500 Microns width :200-1200MM length : 500m ,1000m ,1500m,4000m,6000m,9000m,12000m Polyester film is wound around paper shaft with an internal diameter of 76.2mm-152.4mm and covered with polyethylene film; each coil is supported by damper and put in carton; medium and large package needs wooden mount.
BOPP crystal adhesive packing tape jumbo-rolls ( Bopp Transparent & Brown Tapes acrylic water base size & solvent ) is widely used for slitting medium/smaller rolls for sealing heavy-duty cartons. 1) BOPP super clear adhesive packaging tape with water based acrylic adhesive, high-tensile strength and adhesion. 2) Colors: clear, tan, yellowish, red, dark brown, light tan ,white ,multicolor and printed so on . 3) Thickness: 35mic - 68mic 4) Width:980mm,1020mm,1280mm,1270mm,1635mm ,1640mm,others 5) Length: 4000 m ,4500m,6000 m 6) Qty: 1200rolls/day. Particular size and package style.
1.) Size : Thickness: 125,135,150 Mic Width:520mm,980mm,1020mm,1265mm,1270mm,1280mm,1300mm,1620mm ,1640mm,and others Length: 1500-1800m Color: white 2.) Features : Basic material : crepe paper Color: Beige Adhesive: rubber glue Total thickness:> 0.145 mm The adhesive :> 10 # 180 .c peel:> 5.5 N/25 mm Adhesion:> 6 H Temperature: room temperature, 60C, 80 C,10C .130 C .150 C.160 C .180 C .190 C .200 C .250 C Tensile strength:> 75 N/25 mm Elongation:> 9 3.) Main usage: High strength glue, good performance in paste resume, good stability. Applied to metal coating, circuit boards, copper positioning drilling, plastic positioning and spray, computer casings and electronic positioning spray painting and other purposes. Quantity: 1200rolls/day.
