20943-21 641102182 Sleeve, Shaft used for Mechanical Seal Mission Magnum Centrifugal Pump.
The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.
The revolutionary design of the I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the I remains the competitive pump of choice for aggressive applications.
The I is more powerful, more durable, and easier to maintain than any conventional pump in use today.
The has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in , hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
The Standard-Front Lining of 300-400 Single-stage Centrifugal Pump is made by standard or standard.
Standard-Front Lining is Depending on the impeller design, they can convey slightly contaminated and contaminated media with some solids and content with consistencies of up to 8%. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, single-stage centrifugal pumps can also be used in water supply, waste water treatment, desalination plants, and irrigation as well as drainage. A modular system ensures high availability, enables the use of proven components and reduces the number of spare parts to be held in stock. centrifugal pumps from the series can be delivered with and for an Industrial Internet of Things upward integratable base.
20622A Gland Assembly for Mission 4x3x13 Mud Pumps.
offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Back Liner SP20041A05 is used for 200SV-SP Vertical Slurry Pump.
Slurry Pump Frame Plate Liner Insert is a wear part of slurry pumps, It is also called for slurry pump back liner based on locating position in slurry pump structure, Frame plate liner insert forms a pump chamber with throat bush and volute liner where the slurry would flow through them, offers frame plate liner inserts are interchangeable with warman pump frame plate liner inserts with high chrome, natural rubber, polyurethane for different working condition.
6198 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
ANDRITZ ACP and S series Pump Specifications:
Design:single-stage, single-flow, open and semi-open impeller
Consistency:up to 8%
Head:10-180 m
Flow rate:up to 8,000 m3/h
Pressure:up to 40 bar
Temperature:up to 200
Efficiency:up to 90%
ACP Centrifugal Pump Design:
Impeller(230)
Accelerating the medium by charging it with energy.
Semi-open impeller with vanes on the back.
Spiral casing (102)
Guiding the medium with a favorable flow pattern, converting speed energy into pressure energy.
Pressure-sealed pump casing with delivery and suction channels.
Suction and delivery flange.
Holds the bearing housing with bearing assembly, shaft and impeller.
Pump shaft (211)
Holding the impeller, shaft seal, bearing assembly and coupling.
Transmitting the drive energy to the impeller and thus, to the medium.
Sturdily dimensioned drive shaft.
Bearings
Interface between stationary and rotating parts. Absorption of axial and radial forces.
Impeller side: Two angular contact ball bearings (321.1) with steel cage.
Drive side: One deep groove ball bearings (321.2) with steel cage.
Shaft seal
Depending on operating requirements, there is a choice of eight different shaft seals:
Cartridge mechanical seal - single
Cartridge mechanical seal - double
Standard cartridge mechanical seal - single
Standard cartridge mechanical seal double
Single standard mechanical seal
Tandem mechanical seal
Stuffing box packing
Dynamic shaft seal
HIGH SPEED TUBULAR SEPARATOR
Best factory price of Tubular centrifuge machine High speed solid liquid separate tubular centrifuge
Structure and principle The separator consists of machine body, driving part ,bowl, liquid collecting pan and liquid in bearing seat etc. The material is sprayed onto the bowl from the inlet on the bottom and strong centrifuge force is formed when the bowl rotates with the material and that makes the material flow upper along the wall of the bowl and then separated because of the different gravity by the centrifugal force.
GF for separation: Heavy liquid forms outer ring and light liquid forms inner ring. They flow to the top of the bowl and discharge from their respective outlet. And the little solid is settled on the wall of the bowl and discharged manually after the machine stops.
GQ for clarification: Heavy solid is deposited on the inner wall of the bowl and forms the sludge. And it will be
discharged by manual after the machine stops. The clear liquid flows out of outlet from the top of the bowl. It is mainly used for separating all kinds of suspension difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. The motor connect with the big pulley and delivery the power to the spindle through the belt, tensioner and small pulley and rotate with the bowl in high-speed as the clockwise. The high speed tubular centrifuge is mainly used in liquid solid separation, liquid liquid solid separation in bio pharmacy, beverage, chemical industry. It is an ideal separation equipment by centrifuging, especially for those feeding with little gravity difference, and small dimension in diameter.
1. Stop and start the pump automatically.
2. Stop the pump in the case of water shortage.
3. After power cut off, it can restart the pump automatically when the power on.
4. Protect the pump from damage caused by overheat. 5. Forced start.
Product name Pressure control
Color BLUE-GREY-BLUE
Voltage 220-240V 110V-120V
Frequency 50/60HZPower
1.1KW(220V-240V) 0.75KW(110V-120V)
Start pressure setting 1.0BAR 1.5BAR 2.2BAR
Interface thread G1
Protection level IP54
Maximum working temperature 60
Fuel meaurement unit is installed in the high-pressure oil pump into the position for adjusting the fuel supply and fuel pressure value, controlled by the ECU.
In addition to Fuel Metering Valve,The most common parts ordered include such as Nitrogen Oxygen sensor, Fuel Pressure Sensor, Fuel pressure limiting valve, etc.
Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection
The products are 100% new and carefully packed.
1.Name: Fule metering valve Fuel measurement valve
2.Certification: CE, TS16949
3.Model NO.: 0928400481
4.Function: Control emissions in combustion environments
5.Application: BOSCH CUMMINS DAF IVECO
6.Ciondition: 100% NEW
7.Weight(g): 190.2g
8.Deliverytime: 7-15 days
9.Packing: Neutral packing Customize according to customer needs
6198 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
