Water Pump
Applications: Designed for delivering treated water (feedwater) at the pumping temperature of up to 438K (165C) into the fossil-fueled stationary boilers with absolute steam pressure of maximum 13.7 MPa (140 kgf/cm2). Capacity, Q = 100 m3/h, Head, H = 580 m, Speed of rotation, 2970 rpm, NPSHr = 4 m. The pump units shall be rigidly anchored to the foundation, and piping shall be also rigidly connected to the pumps. The pumps are motor-driven horizontal, centreline-supported, between-bearings multistage ring-section centrifugal pumps with single flow impeller arrangement. The pump casing comprises a suction casing, a delivery casing and a set of stage casings, which are concentrically aligned with respect to each other on rabbeted fits and are bolted together with tie bolts. Diffusers are built in the stage casings and delivery casing. The suction and delivery casings have flanged suction and discharge pump nozzles respectively, which are oriented vertically to the top. The rotor axial thrust is automatically balanced with a balance disc. In order to ensure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side. The pump rotor is carried by the plain bearings with ring lubrication. The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid. Sense of rotation of shaft in all the pumps is counterclockwise, if viewed from the drive side.
Applications: Designed for the supply of water to industrial plants and communities. They are used also for agricultural land irrigation and drainage. Capacity, Q = 400 m3/h, Head, H = 105 m, Speed of rotation, 1470 rpm, NPSHr = 4.5 m The pump units shall be rigidly anchored to the foundation, and piping shall be rigidly connected to the pumps. The TsN type pumps are centrifugal, horizontal, spiral with horizontal split casing, with transfer channels, two- or four-stage, with single-entry impellers symmetrically arranged on the shaft according to type BB1 or BB3 API 610. The pump rotor is supported by grease-lubricated roller bearings. Shaft seals are gland packing. The pump casing is the main part of the pumps, which consists of the lower and upper half of the casing, connected together by studs.
Applications: Designed for handling condensate in the steam and water circuit systems of the thermal power stations that burn organic fuel. May be also used to transfer water in heating plants and water supply systems. Performance of the Pump: Capacity, Q = 80 m3/h, Head, H = 155 m, Speed of rotation, 2940 rpm, NPSHr = 1.6 m The pump as a component of the pump unit is an electrically driven horizontal multistage ring-section centrifugal pump between bearings, with single flow impeller arrangement. The suction casing, delivery casing and stage casings are bolted together with tie bolts to form a pump casing. The suction nozzle integrally cast with the suction casing is located horizontally at side (radially to the pump centerline). The discharge nozzle integrally cast with the delivery casing is oriented vertically upwards. The pump casing is supported at the bottom with feet integrally cast with the suction and delivery casings. The pumping unit alignment is maintained during its operation due to dowelling the delivery casing to the baseplate, whilst the other end of the pump can slide axially thus allowing for free expansion of static components.
D 2500-62-2-S UKhL4 ( 2500-62-2- 4) make Between-Bearings Double Flow Axially Split Pumps Pump parameters: Capacity, Q = 2500 m3/hr, Head, H = 62 m, Speed of rotation 980 RPM, NPSHr = 6 m/ Applications: Designed for the supply of water to industrial plants and communities. They are used also for agricultural land irrigation and drainage. Design: The pump units shall be rigidly anchored to the foundation, and piping shall be rigidly connected to the pumps. The pumps are electrically driven horizontal, foot-mounted, single-stage, axially split volute casing centrifugal pumps with a double entry radial impeller. The pump casing is a locating part of the pumps, which incorporates a lower and an upper casing halves bolted together by means of studs. Pump shaft sealing is by means of packed glands. Sense of rotation of shaft in all the pumps is counterclockwise, if viewed from the drive side. Upon the Customer request, the pumps may be supplied with a rotor for reverse rotation.
EU Organic green lentils, pre cleaned in BIG BAG incoterms only EXW
Golden-Aqua-Smart / WITHOUT PUMP 12 Inline HND 5 Micron Spun (Sediment) Filter 12 Inline HND Carbon Jammy Filter (UDF) 12 Inline HND Block Carbon Jammy Filter (CTO) 10 Inline PALLAS Post Carbon Filter 80GPD PALLAS Membrane Shut-Off Valve 24V Pump (available in pump models) 24V 1.5A Adapter (available in pump models) 60 PSI Pressure Reducer
We offers a range of Tubular Accessories manufactured according to API specification. These accessories are available in different sizes, weights, grades and lengths. API Tubing Pup Joints Premium Tubing Pup Joints Perforated Pup Joints Drill Pipe Pup Joints
It is Aftermarket Replacement Fuel Lift Transfer Pump For Massey Ferguson Reference Numbers: 1446146M91, 1641103M91, 2641304, 2641305, 2641314, 2641A059, 3637414M91, 4222174M91, 4222174M91-A, 890986M91, 893159M91
It is Fuel Pump For Case IH, IHC, International Harvester Reference Numbers: 3917999, G3917999, G3917999-A
Water Hand Manual Pump
Speck Pumpen Vacuum CENTRIFUGAL PUMP new not used single-phase/ three-phase motor: 0.16 HP materials: Ryton connections: G 1/4 shaft sealing: mechanical seal dimensions: length 225 mm width 112 mm medium: e.g. water 60
speck self-priming variable speed pool pump self-priming variable speed pool pump is designed for small commercial and large residential pools and spas. The pump design has been engineered for incredible durability, superior performance, and quiet operation. Speck continues to set standards for the future by using 100% recyclable plastics which benefit the consumer and the environment. Features •This high performance, high flow pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour. •Pump parts are made of 100% recyclable plastic
Speck Centrifugal Pump CY-4281 ROTH D-91154 This listing is for a single Speck Centrifugal Pump Part Number: CY-4281.0732 Model: D-91154 Roth ID: 38581 2800 RPM MAX 3400 RPM The electrical box cover was broke during shipping There are a few minor dents shown in the photo with red arrows to help show. 346-420/200-240V 1,00kW 50 Hz 2780 RPM AC 3 PH-MTR Tags shown in photo if you need more specifications. Please do not hesitate to contact us via eBay with any questions. We are always glad to help.
SPECK 90/400 1300W 1.5HP water PUMP pool pump Pump Features - A high resistance to corrosion and salt water. Maximum effectiveness at low power input. The ultimate in reliability. Maximum water temperature up to 60c. Highest quality German mechanical seal, no contact between motor & shaft with Pool - Spa water. Stainless steel motor shaft. Suitable for high ambient temperatures. Easy to remove clear pump lid. Five Year Manufacturers Warranty. Motor double sealed 316 S/S motor shaft & high quality bearings. Ideal for salt water pools. Flow rate up to 450 lpm. 40mm or 50mm PVC pipework option included. Quick disconnect pipe unions. Easy release pump lid. Self priming. Large Pump Basket 5 Year Australian Manufacturers Warranty on casing,diffuser,gland housing, impeller and mechanical seal!! 2 Year Warranty on Fasco motor.
Roemheld manual hydraulic pump roemheld 131-840 for 1895-433-vdh35roemheld 9425102roemheld 1824510aroemheld 9425102roemheld 1534136broemheld 1537146roemheld 1538146roemheld 131417roemheld bestell-nr.S6853-428 21157 n39roemheld 3887-071roemheld 8755-050 we can also do other items, welcome to send us the details , best price will be sent on request
mp Electrical fuel lift pumpElectrical pump turkey 4132a018 fuel pumpFuel pump 4132a018 4132a018 electrical fuel pumpElectrical fuel pump 4132a018
Tractor fuel pump, construction machinery spare parts, kraftstoffpumpe, bomba de combustible, bomba de carburante, pompa poliwowa, üzemanyag szivattyu, pumpa za bensin, massey fergurson fuel pump, massey fergurson 135 fuel pump, massey fergurson 65 fuel pump, massey ferguson 289 fuel pump, john deere fuel pump, imt fuel electrical fuel pump, 4226484m1 electrical fuel pump, 4226484m1 electrical fuel pump, ulpk0038 fuel pump, 4132a016 electrical fuel pump, 4132a015 fuel pump, ulpk0039 electrical fuel pump, 422699m91 electrical fuel pump, 1r-0793 electrical fuel pump, ford fuel pump, 04179734 fuel pump, 04271682 fuel pump, 04272616 fuel pump, 04272819 fuel pump, px111 fuel pump, 130506351 fuel pump, 130506140 fuel pump.Caterpillar fuel pump, new holland fuel pump, lamborgini fuel pump, volvo fuel pump, balkancar fuel pump, lister peter fuel pump, feed pump, fuel filter, water seperator, glass bowl, filter support, 7971111, 461-174, pbs 514, sp026, 1778/5, 25061447, 25066361, 3267347-7, 3277579
These types of fire hydrophores with the acceptability of nfpa 20 standards ( the standards which are necessary fort he installation of pumps) and designed with electrical or diesel pumps that are selected by their power, capacity and maximum heads with projects are the ideal hydrophores that can be used in military facilities, hotels, office and shopping centres, factories and schools. …