Please click here to check who's online and chat with them.

Find Verified Industrial Machinery Plants Suppliers, Manufacturers and Wholesalers

GOLD Member
VERIFIED
Oct-25-20
125 mm V5 Borewell Submersible Pumpset

125 Mm V5 Borewell Submersible Pumpset

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
V5 Borewell Submersible Pumpset
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are
assembled under pressure and rigidly locked in stainless steel stators shell.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)

Specification
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5 , 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Oct-25-20
Monoblock Pumps FCMl Series

Monoblock Pumps Fcml Series

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.

specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)

characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
GOLD Member
VERIFIED
Oct-25-20
Monoblock Pumps FCM Series

Monoblock Pumps Fcm Series

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement

Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5

Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
GOLD Member
VERIFIED
Oct-25-20
SSP Series

Ssp Series

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.

specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
GOLD Member
VERIFIED
Oct-25-20
Monoblock Pumps SMP Series

Monoblock Pumps Smp Series

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.

specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
41099 Industrial Machinery Plants Suppliers
Short on time? Let Industrial Machinery Plants sellers contact you.
GOLD Member
VERIFIED
Oct-25-20
DC Solar Pumping System

Dc Solar Pumping System

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1

- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free

Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel

MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy

MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel
GOLD Member
VERIFIED
Oct-25-20
AC Solar Pumping System - Borewell

Ac Solar Pumping System - Borewell

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor

Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1

material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass

MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304
GOLD Member
VERIFIED
Oct-25-20
Ac Solar Pumping System - Openwell Pump

Ac Solar Pumping System - Openwell Pump

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Salient Features
Highly efficient 3-Phase Water Filled Motor
- 100% EC grade copper winding
- Easily Rewindable
- Motor Designed with Higher Cooling Effect Ensures Longer Life
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Zero maintenance

Product Specification
Power Range : 3.0 HP to 10.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 â?? 50 Hz
Input Solar DC Power Range : 3000 Wp, 10000 Wp
Input Solar DC Voltage Range : 330 Vmp , 600 Vmp
Head Range : 10 Mtr , 50 Mtr
Discharge Range : 126000 LPD , 425000 LPD
Type of Duty : S1

Material Of Construction
Part Grade
Oil Seal : Nitrile butyl rubber
Motor Shaft : SS - 420
Motor Body : Cast Iron / J4
Motor Bush : LTB-4 / Teflon
Thrust bearing assembly : SS - 420 & Carbon
Base : Cast Iron
Bracket : Cast Iron
Flange : Cast Iron
Casing : Cast Iron
Impeller : Cast Iron
GOLD Member
VERIFIED
Oct-25-20
AC Solar Pumping System - Surface Pump

Ac Solar Pumping System - Surface Pump

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Highly efficient 3-phase Air Cooled motor
- 100% EC grade copper winding
- Easily Rewindable
- Good suction lift characteristics
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Double shielded ball bearings, so no need of external lubrication
- Mechanical seal or stuffing box is provided as per customers requirement
- Zero maintenance

Product Specification
Power Range : 1.0 HP to 10.0 HP
Operating Speed : 0 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 10000 Wp
Input Solar DC Voltage Range : 110 Vmp, 600 Vmp
Head Range : 10 Mtr, 50 Mtr
Discharge Range : 45000 LPD - 405000 LPD
Max. Suction Head : 7 Mtr
Type of Duty : S1

Material Of Construction
Part Grade
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
GOLD Member
VERIFIED
Oct-25-20
V6 Borewell Submersible Pumpset

V6 Borewell Submersible Pumpset

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles

Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade

Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Oct-25-20
V5 Borewell Submersible Pumpset

V5 Borewell Submersible Pumpset

(3.4)
Ask for price
MOQ: Not Specified
  Falcon Pumps Pvt. Ltd.
Supplier From Rajkot, Gujarat, India
Supplier Of Industrial Pumps
 
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series)
- 9 Mtr. Head Per Stage In Radial Flow Series.
- Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial
thrust loads.
- Dynamically balanced roating parts ensure minimum vibration and longer life
- Motor Portion covered with corrosion resistant S.S. J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS pumps are available in (GRS - Series)

Specification -
- Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply
(Single Phase available in 3 HP to 5 HP)
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 640 Mtr.
- Discharge Range : 690 LPM to 80 LPM
- Outlet Size in Inch : 1.5, 2.0" & 2.5"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2
kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star
Delta (SD) upto 9.3 kW
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m²/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
May-08-25
Submersible pumps

Submersible Pumps, 10 grades

(3.1)
Ask for price
MOQ: one container  
  Enzo Trading
Supplier From Mumbai, Maharashtra, India
Supplier Of Industrial Pumps
 
Submersible pumps
GOLD Member
Aug-22-23
Centrufugal Pump

Centrufugal Pump

(2.3)
$150 - $2.00K
MOQ: 50  Pieces
Sample Available
  Saroy Brothers Heavy Engineering And Services Private Limited
Supplier From Ghaziabad, Uttar Pradesh, India
Supplier Of Industrial Pumps
 
* All kinds of Centrifugal Pump with all the capacity.
GOLD Member
Jan-11-23
(2.9)
Supplier From Izmir, Turkey

Agricultural and food machinery, industrial machinery, furniture.Export/import services,customs brokerage,tariff classification and duty management,customs consulting,freight forwarding,product safety and standards,organizing trade missions,networking opportunities.

Supplier Of Furniture   |   Food Processing Machinery   |   Industrial Machinery & Plants

Service Provider Of Clearing & Forwarding   |   Importing/Exporting   |   Wooden Furniture   |   Brokers/Commission Agents
Aug-02-19
(1.0)
Supplier From Pune, Maharashtra, India

We strive to be the best in the material handling solutions in the industry and consistently work towards improving our products and customer satisfaction. Our continuous process has help us to reduce the lead time. Our commitment to provide precision and quality equipment is driven by our dedicated team of workers, who implement innovative ideas and skills. Our range includes material storage systems, material handling systems, material handling equipment, material handling trolley, material handling cranes, jib cranes, overhead cranes, monorail cranes, material handling conveyors, flat belt conveyors, chip conveyors, industrial trolleys, press part sand aluminum profile products..Material handling systems, material handling equipment, material handling trolley, material handling cranes, jib cranes, overhead cranes, monorail cranes, material handling conveyors, flat belt conveyors, chip conveyors, industrial trolleys, press part sand aluminum profile products.

Supplier Of Chimney/Range Hood   |   Cranes & Lifts

Service Provider Of CNC Machines & Spare Parts   |   Door Locks   |   Industrial Processes   |   Leather Gloves   |   Conveyor Systems & Parts   |   Aluminum Die Casted Parts   |   Industrial Belts & Straps   |   Storage Tanks   |   Crane Parts   |   Door Handles   |   Repair & Maintenance   |   Locks & Handles   |   Chips   |   Manufacturer & Exporter   |   Furniture Equipments & Fittings   |   Industrial Gloves   |   Gloves
GOLD Member
Jan-29-25
Diaphragn Pump

Diaphragn Pump

(2.1)
Ask for price
MOQ: Not Specified
  Ararla International
Supplier From Ahmedabad, Gujarat, India
Supplier Of Industrial Pumps
 
Diaphragn Pump
GOLD Member
Jan-27-25
Diaphragm Pump

Diaphragm Pump

(2.1)
$812
MOQ: Not Specified
Sample Available
  Ararla International
Supplier From Ahmedabad, Gujarat, India
Supplier Of Industrial Pumps
 
We are Exporting Different types of Diaphragm pump In the World Market.
GOLD Member
Dec-19-24
Power Take-Off (1In 1Out)1 Clutch hydraulic pump

Power Take-Off (1In 1Out)1 Clutch Hydraulic Pump

(2.1)
Ask for price
MOQ: 1  Pieces
  D-I Industrial Co., Ltd.
Supplier From Jinju-si, Gyeongsangnam-do, South Korea (Republic Of Korea)
Supplier Of Industrial Pumps
 
Key features

Suitable for high-capacity hydraulic pump
Attachable to both sides of the front and rear of the engine
Directly attachable with pump pad
Extend extract port with external gearbox (Option)
SAE C D pumps are available (if required, needs processing).
SAE C D adaptor provided


Application
Workboats that use high-capacity hydraulic accessories
Diesel power unit system
Sep-23-13
(1.3)
Supplier From Dezhou, Shandong, China

Welding wire, mig welding wire, argon arc welding wire, submerged welding wire, flux welding wire.Welding wire

Supplier Of Welding Wires & Supplies

Service Provider Of Welding Wires & Supplies
May-05-22
(1.1)
Supplier From Coimbatore, Tamil Nadu, India

Engineering components, precision machined parts , accessories and parts for textile machinery.Manufacturer & exporter

Supplier Of Textile Machine Spare Parts

Service Provider Of Manufacturer & Exporter   |   Machined Components   |   Welding Wires & Supplies
41099 Industrial Machinery Plants Suppliers
Short on time? Let Industrial Machinery Plants sellers contact you.
No Time to Search? Post Your Buy Requirement to Suppliers Worldwide.
go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com