Model:kv-60 Oil consumption:40-60l/h Output power:450-560kw Max.Output heat:550, 000-600, 000kcal/h (2, 200, 000-2, 400, 000btu/h) Nozzle:siphon brass 6x2.0mm Tube diameter:150mm Heating pipe:1.1kw Motor power:270kw Outside air compressor:1 unit outside ac is needed (0.7-1cbm/min11-17l/s) Power supply:220v 50hz or 110v 50hz Package size:70x58x55cm G.W:65kg Use all kinds of waste oil as fuel Double fire stage Factory for sale Guarantee high quality
Model:kv-120 Oil consumption:100-120l/h Output power:1000-1300kw Max.Output heat:1, 000, 000-1, 200, 000kcal/h (4, 000, 000-4, 800, 000btu/h) Nozzle:siphon brass nozzle 4x2.0mm+8x3.0mm Tube diameter:202mm Heating pipe:2.0kw Motor power:3kw Outside air compressor&gas tank:are needed one 1.2-1.5cbm/min(20-25l/s)ac One gas tank Power supply:220v 50hz 1phase or 380v 50hz 3phase Package size:120x102x79cm(0.97cbm) G.W:125kg Big power waste oil burner Use all kinds of waste oil as fuel Guarantee high quality Factory for sale
Model:kvh-1000 Heat supply area:200-800sq.M(2000-8000 sq.Ft) Size(lxwxh):110x55x55cm Heat exchanger:stainless steel combustion chamber Dranght fan system:two 350mm(dia) ywf Oil consumption:3-5l/h Output power:30-60kw Max.Output heat:50, 000kcal/h(200, 000btu/h) Air output:6000m3/h Fan motor:0.3kw Chimney diameter:100mm Power supply:220v 50hz Outside air compressor:1 unit outside ac is needed about 0.3-0.5cbm/min(5-9l/s) Package size(lxwxh):174x98x89cm(1.518cbm) Gross weight:210kg Use all kinds of waste oil as fuel For garage, workshop, factory, poultry farm etc Completely safe to use
Model:kvh-5000 Heat supply area:1000-1200sq.M(10000-12000 sq.Ft) Size(lxwxh):185x90x127cm Heat exchanger:stainless steel combustion chamber Dranght fan system:one 600mm(dia) ywf Oil consumption:6-8l/h Output power:80-120kw Max.Output heat:100, 000kcal/h(400, 000btu/h) Air output:12000m3/h Air output exit:2x250mm(dia) Fan motor:0.88kw Chimney diameter:140mm Power supply:220v 50hz Outside air compressor:1 unit outside ac is needed about 0.3-0.5cbm/min(5-9l/s) Package size(lxwxh):200x100x140cm(2.8cbm) Gross weight:300kg Use all kinds of waste oil as fuel For garage, workshop, poulty farm etc Completely safe to use Factory for sale Guarantee high quality
Model:kv-20 Oil consumption:13-15l/h Output power:154-195kw Max.Output heat:150, 000-200, 000kcal/h (600, 000-800, 000btul/h) Nozzle:brass siphon 2x2.0mm Tube diameter:114mm Heating pipe:1.0kw Motor power:180w Power supply:220v 50hz 110v 60hz Outside air compressor:1 unit outside ac is needed about 0.3-0.5cbm/min(5-9l/s) Package size(lxwxh):58x53x42cm Gross weight:30kg Use all kinds of waste oil as fuel Guarantee high quality Factory for sale
Model:kv-30 Oil consumption:15-21l/h Output power:216-265kw Max.Output heat:250, 000-300, 000kcal/h (1000, 000-1200, 000btu/h) Nozzle, siphon brass:3x2.0mm Tube diameter:114mm Heating pipe:1.0kw Motor power:210w Outside air compressor:1 unit outside ac is needed 0.3-0.5cbm/min(5-9l/s) Power supply:220v 50hz or 110v 60hz Pcakge size:58x53x42cm G.W:30kg Use all kinds of waste oil as fuel Factory for sale Guarantee high quality
Model:kv-50 Oil consumption:35-45l/h Output power:230-460kw Max.Output heat:450, 000-500, 000kcal/h (1, 800, 000-2, 000, 000btu/h) Nozzle:siphon brass 5x2.0mm Tube diameter:150mm Heating pipe:1.1kw Motor power:270kw Outside air compressor:1 unit outside ac is needed (0.7-1cbm/min11-17l/s) Power supply:220v 50hz or 110v 50hz Package size:70x58x55cm G.W:65kg Use all kinds of waste oil as fuel Double fire stage Guarantee high quality Factory for sale
Model:kvh-2000 Heat supply area:800-1000sq.M (8000-10000 sq.Ft) Size(lxwxh):95x56x174cm Heat exchanger:stainless steel combustion chamber Dranght fan system:four 350mm(dia) ywf Oil consumption:6-8l/h Output power:80-120kw Max.Output heat:100, 000kcal/h(400, 000btu/h) Air output:12000m3/h Fan motor:0.6kw Chimney diameter:100mm Power supply:220v 50hz Outside air compressor:1 unit outside ac is needed about 0.3-0.5cbm/min(5-9l/s) Package size(lxwxh):190x85x110cm(1.8cbm) Gross weight:300kg Use all kinds of waste oil as fuel For garage, workshop, poultry farm etc Hot wind output Completely safe to use
Structural system : 1).The crucible made of special composite steel plate does not pollute Magnesium liquid, and has antiseptic structure in it, and has long Service life 2).Stainless steel shell and panel, corrosion resistant, high temperature Resistantïzl201430063916.2ï 3).Quantitative pump instantaneous flow design, maintenance time of more Than 30 daysïzl201220249304.8ï 4).The transmission tube is made of special corrosion resistant material. It can be replaced quickly and maintained for more than 30 Days(zl201120347014.2ï 5).The preheating machine adopts a clamping mechanism, so that the Liquid level control is stable, and the feeding precision is accurate(zl201420137471.2ï 6ï.Design of anti clogging magnesium alloy elbowïzl201120322157.8ï 7ï.Perfect cleaning toolsïzl201120323381.9ï
Product features: 1). Application: heat treatment for bar, pipe, tube, shaft, bearing, billet, slab 2). Available power: 100kw-10000kw 3). Non-standard product: professional customization
Product Description graphite electrode(High quality, competitive price,ready stock):  1.Diameter:150~700mm  2.Length: 1700~2400mm  3.Nipples: 4TPI   We are one of leading graphite electrode manufacturer in North of China, till now, we have production capacity 30,000 tons per year, and we exported graphite electrode to Europe and America near 500 tons per month, and export graphite scrap to Europe 300 tons per month.  Now we hope to establish business relationship with you and your company, believe it will come true in near future. z
Business Scope At present, leading products and business scope the company provided for customers are as follows: 1.National key new product: LF-typed three-phase single- or three-arm ladle refining furnace with capacity of 8ï½?160 tons; 2.Domestic advanced high-impedance and ultra high power EAF; 3.3200KVA-60000KVA Submerged Arc Furnace for Ferro-Alloy 4.VD, VOD and AOD type vacuum refining furnaces and process systems with capacity of 15ï½?150 tons; 5.Electrode regulating systems of EAF and ladle furnace; 6.National key new product: DW series EAF short network with capacity of 5ï½?160 tons; 7.Patented product: DB series conductive cross arm of EAF with capacity of 10ï½?160 tons; and 8.SL series of large cross-sectioned water-cooled cable suitable for EAF, refining and electric arc furnace. z
The melting furnace is used for the melting of Aluminum alloy. It applies regenerative combustion system . The furnace has no auxiliary exhaust duct, which means the furnace has a higher residual heat recycle rate and a lower temperature of exhaust smoke (less than 200 ),at the same time such design is cost saving. The furnace is featured with high level of automation and security as well as low energy cost and burning loss. The furnace has applied electric configuration from Honeywell, Siemens, ABB and Schneider and it has cuttingedge advantagesin the field of efficiency andenergy saving in Chinese Aluminum industry.
The professional design is integrated with lots of innovation and top electric components, it features with better temperature uniform and comprehensive performance; Friendship man-machine interface, simplified processing, excellent for operation.
The holding furnace is used for the refine, drossing, standing and temperature rising of Aluminum and molten Aluminum during or before casting. The furnace applies direct combustion burner, which is featured with high temperature rising ratio and the temperature of molten Aluminum could be precisively manipulated. The end product of this furnace (molten Aluminum) is fully qualified for the condition before casting.
The holding furnace is used for the refine, drossing, standing and temperature rising of Aluminum and molten Aluminum during or before casting. The furnace applies direct combustion burner, which is featured with high temperature rising ratio and the temperature of molten Aluminum could be precisively manipulated. The end product of this furnace (molten Aluminum) is fully qualified for the condition before casting.
China supplier boiler components superheater with best quality is a device used to convert saturated steam or wet steam into dry steam used in steam engines or in processes, such as steam reforming. There are three types of super heaters namely: radiant, convection and separately fired. A super heater can vary in size from a few tens of feet to several hundred feet ( a few meters to hundred meters). China supplier boiler components superheater with best quality is consisted of a serious of bare coil (carbon steel, alloy steel, or durable heat steel) and header and other auxiliaries. Tubes Ï?32, 38, 42 and so on, also as the request. In the power station boiler, the action of the boiler component superheater is to heat the saturated steam to the superheated steam with the certain temperature. The re-heater is a actual steam superheater which re-heat the low and middle pressure steam after working to certain temperature, the use of the reheater further improve the heat efficiency of the power station and make the steam temperature of the turbine last stage blade to be controlled in a limited range.
Better performance biomass steam boiler with high efficiency absorbs the merits from quick fitting boiler,features compact in structure,the boilerâ??s shop is of one storey arranged,convenient for site installation,short in construction period,cheap in cost,simple in operation and etc.This series of steam boiler is suitable for industrial and living steam consumption;the correspondent capacity hot water boiler is applied for industrial and civil heating purpose. 1). Horizontal dual cylinder portrait arranged; 2). Chain grating; 3). Use quick fitting or assembly structure; 4). 4-6t/h boiler is of quick fitting pipe structure,exit shop after completely assembled
The economizer can be installed at the rear of exhaust gas stovepipe to recovery exhaust gas heat,increase the electricity output,lower the coal consumption spiral finned tube economizer is a new and efficient heat transfer equipment, which is a good solution to the light tube economizer because of badly worn, short life and other shortcomings. 1, material composition It is made of spiral finned tubes,inlet header,outlet header, elbow and other supporting material. 2, the structural arrangement Spiral finned tubes are in-line arrangement or staggered layout, water in the pipe. 3, Features heat transfer area can be greatly extended, reducing the volume and angle fittings, enhanced heat transfer. hard fouling Clogging: As gas flows through the finned tube forming the boundary layer, resulting in the vortex. adapting to wide temperature, high pressure;impact resistance low flue gas resistance
Economizer is a heat exchanger device that captures the "lost or waste heat" from the boiler's hot stack gas. The latest technology boiler spiral finned tubes economizer typically transfers this waste heat to the boiler's feed-water or return water circuit, but it can also be used to heat domestic water or other process fluids Our enconomizer is squeezing by high frequency welding method and the technology of steel strip according to certain structure automatically, continuous spiral welding outside the light tube wall, and then the other reserved part light tube bending, combination according to the requirement. As a result, the diameter and length under the same conditions, it has larger heat transfer area.
