BOF SLAG: Basic oxygen furnace
About 100 ? 200 kg of BOF slag is generated per ton of liquid steel. This material is often used in projects like road construction, but this route provides little energy efficiency gains. Steel slag can also be used in the cement clinker manufacturing process. The result is an increase in clinker production of up to 15% with no net increase in CO2 emissions.
Basic oxygen furnace (BOF) slag has increased skid resistance and high level of strength (described by the impact- and crushing value) compared to natural rocks (e.g. basalt) and thus makes it an ideal aggregate for road constructions and surface layers for high skid resistance. Other fields of application are the production of fertilizers or the use of armour stones for hydraulic engineering.
Conventional natural gas aluminum melting furnace refers to using natural gas or liquefied petroleum gas as energy to melt aluminum ingots or recycled aluminum materials and keep them warm . Then the molten aluminum is used for further processing. It has the advantages of fast melting speed, precise temperature control, and few equipment failures.
Features and benefits
Use silicon carbide graphite crucible, no iron added, no aluminum sticking, fast heat conduction, service life of more than half a year.
The outer shell is made of 5mm thick steel plate and the bottom is 10mm channel steel, with a solid structure.
The heating adopts imported Italian natural gas burner, which has full combustion, high heat utilization rate and a service life of up to five years.
The temperature control meter adopts a digital touch temperature control meter with precise temperature control and automatic constant temperature device.
The interior is made entirely of high-temperature resistant special-grade high-alumina bricks and refractory castables, with good thermal insulation effect, and the furnace shell temperature does not exceed 60 degrees.
Application Areas
Our natural gas aluminum melting furnace is suitable for melting and holding operations in industries such as die casting, sand casting, gravity casting, centrifugal casting, etc.
Gas Fired Aluminum Melting Furnace
Share:
Gas Fired Aluminum Melting Furnace refers to using natural gas or liquefied petroleum gas as energy to melt aluminum ingots or recycled aluminum materials and keep them warm . Then the molten aluminum is used for further processing. It has the advantages of fast melting speed, precise temperature control, and few equipment failures.
Features and benefits
Use silicon carbide graphite crucible, no iron added, no aluminum sticking, fast heat conduction, service life of more than half a year.
The outer shell is made of 5mm thick steel plate and the bottom is 10mm channel steel, with a solid structure.
The heating adopts imported Italian natural gas burner, which has full combustion, high heat utilization rate and a service life of up to five years.
The temperature control meter adopts a digital touch temperature control meter with precise temperature control and automatic constant temperature device.
The interior is made entirely of high-temperature resistant special-grade high-alumina bricks and refractory castables, with good thermal insulation effect, and the furnace shell temperature does not exceed 60 degrees.
Electric melting and holding furnace refers to using electricity as energy to melt aluminum ingots or recycled aluminum materials and keep them warm . The molten aluminum is then used for further processing. It has the advantages of fast melting speed, precise temperature control, and fewer equipment failures.
Application areas
Our electric melting and holding furnace is suitable for melting and holding operations in die casting, sand casting, gravity casting, centrifugal casting and other industries.
Features and Benefits
Using silicon carbide graphite crucible, it does not add iron, does not stick to aluminum, has fast heat conduction, and has a service life of more than half a year.
The outer shell is made of 5mm thick steel plate and the bottom is 10mm channel steel, with a solid structure.
The heating belt adopts imported high-temperature heating flat belt, which has high heat utilization rate and a service life of up to three years.
The temperature control watch adopts a digital display touch temperature control watch with PLD control function and an automatic constant temperature device with precise temperature control.
It adopts Taiwan's integrated SCR three-phase power regulator, with its own current, input and other display panels, built-in fault diagnosis, and long service life.
The PID system will automatically control the power output as needed to effectively save energy.
All interiors are made of ceramic fiber modules, which have good thermal insulation effect and the temperature of the furnace shell does not exceed 45 degrees.
A melting furnace is a type of industrial furnace used to melt various materials, such as metals, glass, and plastics, typically for casting or recycling purposes.
Applications of Melting Furnaces
â?¢ Metal Casting: Melting and casting of metals into molds to create various products and components.
â?¢ Glassmaking: Melting glass for forming into bottles, windows, and other glass products.
â?¢ Ceramics: Melting ceramic materials for molding and shaping into ceramic products.
â?¢ Recycling: Melting scrap metal or glass for recycling into new materials.
Components of a Melting Furnace
Crucible: A container made of refractory material (such as graphite or ceramics) where the material to be melted is placed. Crucibles withstand high temperatures and chemical reactions.
Heating Elements: Electric resistance heating elements or burners that generate heat to raise the temperature inside the furnace.
Refractory Lining: Insulating materials lining the furnace to retain heat and protect the outer shell from high temperatures.
Charging and Pouring Systems: Mechanisms for adding materials to the crucible and pouring molten metal or liquid into molds.
Temperature Controls: Thermocouples and controllers to monitor and regulate the furnace temperature accurately.
We are a professional melting furnace manufacturer. You are welcome to choose different types of melting furnaces. If you can't find the product you need, please contact us.
SZL coal fired steam boiler is specially designed and optimized for applications to produce low and medium pressure steam or hot water with rated evaporation capacity from 2 to 35 ton/hr and rated pressure from 0.7 to 2.5 MPa. The design heat efficiency of SZL coal boiler is up to 81~82%.
SZL coal fired steam boiler is specially designed and optimized for applications to produce low and medium pressure steam or hot water with rated evaporation capacity from 2 to 35 ton hr and rated pressure from 0 7 to 2 5 MPa The design heat efficiency
Thermal oil boiler is an safe and energy saving boiler with working characteristics of low working pressure (0.8 MPa) and high temperature (330).
The boiler is wide adoptability of different fuels, the fuel could be coal and biomass, including wood, straw, bagasse, cotton seed, sawdust, cocoa shell, nut shell, etc
The combustion equipment is chain grate, and the boiler could be designed as vertical type and horizontal type.
The heat carrier is heat conduction oil, the circulating pump force heat transfer medium circulating in liquid phrase, and transfer heat to heat user equipment, then return to the heating furnace for reheating.
Because of working in liquid state, the coal fired thermal oil heater is safe and reliable.
Industrial Annealing Furnace and Annealer Oven Stove for Steel Wire Coil Metal Parts Heat Treatment.
Annealing Furnace means Pit Type Furnace. Double Block Furnace can load two block for high capacity once. Single Block Furnace only take one block liner. Annealing Furnace adopts separate zones to control heating temperature well.
Annealing Furnace for Heat-treating & Tempering.
Specifications and models DL2-300-2
Effective dimensions (mm) 1500Ã??2700Ã??2100
Overall dimensions (mm) 1700Ã??3500Ã??2200
Wire loading space (mm) 1200Ã??2050*2
Furnace foundation pit dimensions 2600WÃ??4800LÃ??2400H
Rated power (Kw) 300kw
Number of heating zones Two zones
Rated voltage 380v 50HZ
Maximum temperature 1000 degrees
Common temperature (â??) 950 degrees
Electrical control system PID intelligent control/ 7-inch color touch screen control
Control accuracy (â??) �±2.5 degrees
Furnace temperature uniformity (â??) �±10 degrees
Furnace bottom plate With furnace bottom heating including furnace bottom plate material CrMnN
Theoretical loading capacity (Ton) 17
Lifting mechanism Lifting furnace cover
Annealing is a metal heat â?? treatment process. It involves slowly heating the metal to a certain temperature, maintaining this temperature for a sufficient period, and then cooling it at an appropriate rate. Sometimes, the cooling is natural, while other times, the cooling rate is controlled. This process is crucial for modifying the properties of metals.
Features of 4-Row Nitrogen Mixer Roller Furnace for Anode
Vault Structure - the exhaust gas is gathered at the top, which helps the waste gas to be discharged out of the furnace quickly and reduces the residual alkali content;
Anti-Corrosion Material of Furnance: The heating section uses corundum bricks, which are highly dense and tar carbon errosion-resistant, ensuring the safety of the kiln;
Protection for Silicon Carbide Rod - Quartz tubes and high-density corundum tubes are used to prevent arcing;
Effective Glue Discharge - Large-diameter glue discharge outlet, backflow main pipe and pipeline insulation and heating to prevent tar adhesion;
Preheating - preheating before coming through bottom inlet to eliminate dead air in the furnace and improve the uniformity of atmosphere and temperature in the furnace;
Waste Gas Incineration - Multi-stage incinerator disposes tar completely.
Now the price of gas powered roller, row roller and small tube roller furnance is reasonable, anything you need, please contact us.
As an anode systems company, we can provide kinds of nitrogen dosing system, nitrogen dryer system for sale. If you are interested, please leave us a message.
For more types of automated storage and retrieval system in logistics, please visit our website.
Zhejiang MESNAC Intelligent Technology Co., Ltd. specializes in the R&D and manufacturing of pneumatic conveying, dosing, mixing and slurrying systems for powder and granular materials, as well as solid and liquid two-phase flow customized systems. Based on material handling, MESNAC has been engaged in Intelligent Equipment, Material Handling System, Intelligent Supporting Service as its core, achieving integrated development in such multiple fields as lithium-ion battery production, battery material production, chemicals, food, pharmaceuticals. From material storage to transfer, from dust-free unpacking system to high-precision conveying system, from recipe management to production control, MESNAC commits itself to providing flexible and intelligent turnkey solutions for customers in various industries, becoming a leading brand in material handling at home.
**Turn Your Copper Scrap into Cash with Our Copper Scrap Melting Oven!**
**Efficient. Reliable. Built for Professionals.**
Our Copper Scrap Melting Oven is the ultimate solution for anyone looking to recycle copper efficiently. Engineered with high-quality materials and advanced heating elements, this furnace can handle large quantities, achieving melt temperatures quickly and evenly. Whether you're in metalworking, recycling, or crafts, this oven is your best tool for copper melting!
### **Why Choose Our Copper Scrap Melting Oven?**
- **High-Performance Heating**: Reaches optimal temperatures swiftly, reducing energy costs and saving time.
- **Durable Design**: Built with industrial-grade materials to withstand extreme temperatures, ensuring a long lifespan.
- **Efficient Capacity**: Perfect for melting significant amounts of scrap copper, maximizing your productivity.
- **Safe & User-Friendly**: Advanced safety features protect you while allowing for easy operation.
**Perfect for Various Industries**
Ideal for scrap yards, metal recyclers, artists, and small to medium businesses looking to recycle copper scrap effectively.
**Maximize Your Return on Copper Scrap!**
Melt and mold copper with easeturn your scrap into valuable material today!
**Contact us for pricing and see how the Copper Scrap Melting Oven can work for you!**
Dismantled boiler Schmid Utsk 1400-22, with a capacity of 1400 kW, year 1996. Our company also provides services for dismantling, installation and assembly drying chambers, heating boilers and others. Also have another drying chambers with smaller size. We can help you in the assembly of the drying chamber.
Thermocar 16B08
12 Volt RV Condensing Gas boiler
12 Volt DC Condensing caravan gas boiler ( RV Boiler )
Storage Tank Capacity :16 liter
Electric heating capacity : 12 Volt 200 Watt for Solar
Gas heating capacity : 8 kW
Premix burner
Water pressure safety
Temperature safety
Waterless fire safety
Gas inlet: 3/8''
Hot water outlet : 3/8''
Cold water inlet : 3/8''
Height : 330 mm
Diemeter: 358 mm
Airintake duct : 50 mm
Exhaust duct: 25 mm
Wi-Fi Controller
Muffle Furnace is designed for R&D labs, Educational institutions , Medicine and Industry, Chemical Industries, Plastic Industry, Moulding Industry, Glass Industry, Rubber Industry, Ceramics Industry, Biomedical Industry, Paint Industry, Textile Materials, Pharma Industry, Dental Labs, Thermal Process Technology, Advanced Materials for following applications, Testing, Analysing, Ashing, Drying, Sintering, Annealing, Melting, Tempering, Hardening, Dental Porcelain, and Crystalizing etc.
Temperature range 1700 C max
Supply Single phase/three phase
Maximum operating temperature range up to 1700°C.
Dimensions from 1 up to 200 litres.
Rugged and durable construction.
The outer casing is made up of thick mild steel with duly powder coated or thick buffed stainless steel, gives long service life with
extremely resistant.
Multiplayer insulation with vacuum formed ceramic fibre or refractory bricks with low thermal mass.
Parallel guided swing aside door design.
Furnace design with powerful heating elements i.e. FeCrAl, SiC and MoSi2 on both sides providing a fast heating rate.
Fast heat up and cool down rates.
Temperature uniformity +/- 5°C.
Temperature control with PID controllers.
Power control with solid-state relays or Thyristor units for very precise temperature Control, wear-free and noiseless.
High mechanical durability, short heating cycle and low power consumption.
10 kW - 24 kW Capacity range
Electric Combi Boilers
Electric Combi Boiler Properties
3 Level Pump and Additional Pump Option
6 Different Security System
7 Days, 21 Program with Interior Timer
Anti Blockage and Freezing Prevention System
Different Temperature Value Determination For Each Program
Full Modulation, High Efficiency.
Under Floor Heating or Radiator Heating Option
If Required 3 Level Setting
Operating as 3 Phase or Single Phase
Operation Conformity with Solar Energy
Summer Winter Mode Option
Touch Button and Easy Use Lcd Panel
