Technique parameter of kechuang ultrahigh frequency xc-40b: 1). 0.15mpa water pressure 0.3mpa 2). Input power:40kva 3). Input voltage:380v 50hz 4). Max input current: single phase 60a 5). Oscillating frequency: 100-300khz 6). Inverted power 40kva 7). Perfect function of protect itself, such as over-voltage, over current, lack of water, phase fail, over hot, etc. 8). Digital auto-control, it has the function of manual, automatic and heating-keeping-cooling divide period to control. 9). Auto tracking frequency , the power can infinitely variable control. 10). Special cycle cooling system, make sure the machine work continuously. 11). Weight ¬main body ¬30kg transformer ¬25kg 12). Volume (mm ) ¬main body ¬520x260x450 transformer ¬400x260x370. Wooden packing.
Brief Introduction of the CFB Boiler The circulating fluidized bed boiler is a high pressure, single drum, steel structure and natural circulation boiler. The arrangement for the integrated boiler is adopted. Rectangular section of the combustion is adopted for the boiler. The membrane wall construction is arranged for the four sides walls of the furnace and enclosure of the rear pass. Water-cooled platen and secondary super-heater are arranged in the furnace while abrasion resistant refractory is lined in the emulsion zone at the lower part of the furnace to protect the furnace from erosion in operation. The super-heaters are divided into SH1, SH2 and SH3. Convection super-heater, economizer and horizontal tubular air pre-heater with primary and secondary airflow separators are arranged in the rear pass in sequence. Two hot or steam-cooling cyclones with U type loop seal is arranged between the furnace and rear pass of the boiler. The cyclones are lined with refractory to assure reliable operation. Anti-explosion buck-stay and expansion center with non-metal expansion joint are arranged for the boiler to solve the tri-direction expansion problem. Technical Features of the Boiler * The design of the advanced water-cooled grid with even distributed air, large bell type nozzle, reasonable resistance and no blocking makes the boiler long service life ; * Large width-to-depth ratio of the furnace to facilitate the secondary air passing through and being mixed ; * High efficiency heat insulation cyclone separator is adopted ; * Stable and reliable operation and high efficiency insulated or air-cooled cyclone ; * Self equilibrating U type loop seal for returning the circulating material to make the control simple and reliable ; * Three stage super-heater arrangement with the secondary super-heater in the furnace to improve the radiant characteristic of the super-heater efficiency ; * Spray type de-super-heating is adopted to get fast de-super-heating reliably and safely ; * Tubular air pre-heater with the primary and secondary air separate arrangement.
G_ Pulverized Coal Fired Boilers Single drum, single furnace, natural circulation pulverized coal fired boiler is regularly arranged with equilibrating ventilation, solid removal, all steel suspension structure, all welled membrane walls, control damper at the back passes. Platen super-heater, end super-heater and low temperature super-heater, economizer and air pre-heater are arranged along with smoke flow process in sequence. Technical Features 1. The unit is equipped with tilting corner nozzles for a tangential firing system to keep the air dynamic field inside the furnace without tilting 2. The furnace is optimally designed with proven structures proper arrangement and thermal parameters. A certain control margin are reserved sufficient to ensure complete combustion, high thermal efficiency , safe and stable operation 3. The thick-light patent is adopted for the primary air to allow easy firing and anti-sintering 4. The damper structure makes it a nice appearance 5. Three stages arrangement for super-heaters and two stages of water spray de-super-heating. 6. Tubular air pre-heater with the primary and secondary air separate arrangement.
Solid fuel boiler.
Solid fuel thermoblock
Hot water boiler
Fuel boiler.
Fuel boiler
Ground granulated blast furnace slag powder 1. Product: ground granulated blast furnace slag powder (ggbs) 2. Standard: s95 3. Blain value as >400m2/kg 4. Activity index > 75(7days), 95(28days) 5. Density (g/cm3)>2.8 6. Fluidity: >90 7. So3 (%) around 0.1 8. Loss (%):
Ground granulated blast furnace slag powder 2. Standard: s95 3. Blain value as >400m2/kg 4. Activity index > 75(7days), 95(28days) 5. Density (g/cm3)>2.8 6. Fluidity: >90 7. So3 (%) around 0.1 8. Loss (%):
All furnace features 1. 30 Segment Programmable Temperature Controller 2. High quality MoSi2 or SiC Heating Elements. 3. Double Shell Design to low outside Furnace Temperature
The t962 is a micro-processor controlled reflow oven. The device is powered by standard 110vac 50/60hz (220vac model is available). User interface is implemented by way of t962 input keys and an lcd display. Pre-set heating modes are selected by user interaction with thermal cycle progress observed on lcd display. This self-contained reflow station allows safe soldering techniques and the manipulation of smdf=bag and other small electronic parts mounted on a pcb assembly. The t962 may be used to automatically fre-flowf solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes. A windowed drawer is designed to hold the work-piece. Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air. The t962 is simple to use, the soldering process is completely automatic defined by pre-defined thermal cycles
Syndanio - 350 High strength machinable, thermal & electrical insulation material Withstands 350C temperature .
Component voltage is 75V/110/220V/380V or other voltage grades needed by users. 1.Length 200 - 3,000 mm; Outer diameter: OD8-50mm; Power: 300-6000KW. Our company can also process, design, produce goods according to each technical parameter of user's special request. 2.Surface temperature of heater divides into three grades: Low temperature: 400íµ --600íµ mid temperature: 600íµ --800íµ high temperature: 800íµ --1000 íµ 3.Relative radiation characteristic: This quartz heater component has strong transmission at far infrared, compared with other kinds far infrared products, when the wavelength >6Lj, radiation energy is particularly remarkable. 4.The spectrum emissivities: The quartz heater the component have no coating, and milky white quartz tube playing a radiation role promptly, also supporting and insulate role. Carton case
Induction heating machine For hardening, annealing, brazing For pcs
Rubber roller Company imports & distributors rice dehusking rubber rollers Carton packing
We are the manufacture of nozzle heaters,if u interested in any specification,pls let me know.
We are the manufacture of cartridge heaters, if u interested in any specification,pls let me know.
Band Heater series Double-deck stainless steel heating circle HSB1-B2
Coil heater series WE ARE THE MANUFACTURE OF COIL HEATERS. It is a company that specializes in manufacturing all kinds of these products, has high-tech content. SPECIFICATION: 1) Ni-Cr alloyed metal as heating element. 2) Round, square and rectangular cross sections. 3) Dimensions (cross sections in mm) Square: 2x2mm,3x3mm, 3.5x3.5mm, 4x4mm,5x5mm,6x6mm,7x7mm,8x8mm Round:1.5mm,1.8mm, 2.5mm,3mm, 4mm, 5mm,6mm,7mm,8mm Rectangular: 4x2mm,4.2x2.2mm 4) Rated Voltage: 220V, 230V, 240V,380V,110V,127V,24V,36V,12V 5) Rated Power:30w (min) 6) Inner Diameter:6mm(min) 7) Length:20mm(min) 8) Type J and K thermocouples available 9) Luster: Polished or Sand-blasted
