FP Series Double Suction Fan Pump is a low pulse and high efficient paper pulp pump,It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 m/h and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation. FP Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries. Design Features: Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration. Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation. Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc Shaft seal - Mechanical seals and packing seal can be used as per requested Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Frame Plate Liner Insert SP15041A05 is the main part of 150SV-SP Vertical Slurry Pump wet side. It works with the volute lining. The frame plate liner inserts and impellers are used to transport mud. And the frame plate has a replaceable wear-resistant metal lining plate or rubber lining plate. are a professional slurry pump parts manufacturer, Slurry Pump spare parts are a maintenance requirement when operating slurry pumps, and can t be ignored. offer suitable replace spare parts for original slurry pump, including heavy duty slurry pumps AH (R), M (R), high head slurry pump HH, light duty slurry pump L (R), gravel pumps, vertical sump slurry pump, and froth pump. Tobee have different materials, such as high chrome pump parts, dual-phase steel slurry pump parts, slurry rubber pump spares, polyurethane pump spare parts, slurry pump ceramic sapres, etc.
Vertical slurry pump named vertical spindle pump, Vertical sump pump, vertical cantilever pump. vertical submerged pump. Vertical sewage pump, Column pump as well. Impeller SP10206 - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary. Casing SP10092 - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR. Back Liner SP10041 - It forms a pump chamber with throat bush and volute liner where the slurry would flow through them, Tobee offers back liners are interchangeable with stardard pump back liners with high chrome, natural rubber, polyurethane for different working condition. Vertical Sump Pump Parts: Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing. Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered. Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected. Submerged Bearings - None Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye. Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
Attapulgite, barite (grey & white),bentonite,(sodium & calcium) dolomite, feldspar, kaolin, quartz lumps, quartz grits, quartz powder, ramming mass, abrasive sand, fly ash, silica fumes(white & grey) ggfs,ggbs, phosphogypsum, gypsum powder & lumps, precipitated calcium carbonate(pcc, gcc), precipitated silica,natural & quartz silica sand for sports grounds and infill for synthetic turf, beach volleyball court, artificial beach, grow beds of aquaponics, bunker sand etc...
1.5 1B-TH Slurry Pump is end-suction, split-case, centrifugal slurry pumps have set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, Application customization comes standard with this line by applying a wide variety of metallic and elastomeric parts options, an assortment of seal arrangements, and a standard impeller adjustment mechanism incorporated into every base assembly. Slurry Pump Design Features Slurry Pump wet parts are made of wear-resistant high chromium alloy. Slurry Pump bearing assembly use cylindrical structure, adjusting the space between impeller and front liner easily. They can be removed completely when being repaired. Bearing assembly use grease lubrication. International famous bearing The shaft seal could use the packing seal, expeller seal and mechanical seal for all slurry pump. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications at its working site. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
CLP700 lower Consistency Centrifugal Cleaner Virgin paper pulp Rate passing capacity of single equipment(L/min):400-600 Inlet consistency(%):0.3-1.2 Diameter of deslagging outlet(L/min):3-16 Pressure of inflow pulp(Mpa):0.2-0.4 1.Divided design, the cleaners can be divided into 3-4 parts ,which make it easier for disassembly, assembly and replace.
Commercial Equipment And Spare Parts.
Filter presses in polypropylene in sizes from 355mm x 355mm to 1200mm x 1200mm.
All Type Industrial Material Supply.
Valves cocks and boiler mountings.
Industrial supplies, industrial electrical products.
All type of industrial products.
All industrial product from Europe and used equipment.Commission dealing
Rolling mill rolls.
industrial products.Exports
Chemical equipments like evaporators, crystallizers, filtration equipments.Design, fabrication, erection, commissioning, consultancy and turnkey projects
Lined ball valves,lined plug valves in pfa,fep,mfa.
Silicone seals gasket,silicone gasket,silicone seals,silicone can cover,silicone cover,silicone spin cup,silicone folding box,silicone ice cake mold,silicone hand sanitizer holder,silicone phone holder,silicone bands,silicone x bands,silicone holders.silicone lid,silicone pet produts,silicone baby products.rubber bands,custom silicone rubber products,rubber products,silicone rubber sleeve,.
Industrial products.
