Additional information Weight 11 lbs Dimensions 10 x2 x2.7 in Material Industrial-strength Low-density Resins (thicker material) style 1.5 Mil Quantity 25/case Color Clear Green / Environmentally- Fiendly Yes
Additional information Weight 19 lbs Dimensions 16.13 x 11.88 x5.63 in Material Plastic style 1.5 Mil Quantity 100/case Color Black Green / Environmentally- Fiendly Yes
Additional information Weight 16.5 lbs Dimensions 16.38 Ã?? 13.38 Ã?? 4.38 in Material Plastic style 6.0Mil Quantity 25/case Color Black Green / Environmentally- Fiendly Yes
Additional information Weight 22 lbs Dimensions 17 x11 x 6 in Material Plastic style 4.0Mil Quantity 50/case Color Black Green / Environmentally- Friendly Yes
Additional information Weight 16.53 lbs Dimensions 16.13 x 11.88 x 4.63 in Material Plastic style 3.0 Mil Quantity 50/case Color Black Green / Environmentally- Fiendly Yes
Additional information Weight 15 lbs Dimensions 16.13 x11.88 x 4.63 in Material Plastic style 2.3 Mil Quantity 50/case Color Black Green / Environmentally- Friendly Yes
20943-21 641102182 Sleeve, Shaft used for Mechanical Seal Mission Magnum Centrifugal Pump. The Mission I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The revolutionary design of the I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the I remains the competitive pump of choice for aggressive applications. The I is more powerful, more durable, and easier to maintain than any conventional pump in use today. The has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in , hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Andritz S Pump and Spares S100-350 pump front lining is made of 1.4460 material, and S100-350 pump fields of application including mechanical pulp production, secondary fibres, board machine, biological waste water treatment, sugar industry, flue gas desulphurization, bio-ethanol treatment, chemical pulp etc. Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.
Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
FP Series Double Suction Fan Pump is a low pulse and high efficient paper pulp pump,It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 m/h and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation. FP Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries. Design Features: Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration. Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation. Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc Shaft seal - Mechanical seals and packing seal can be used as per requested Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Frame Plate Liner Insert SP15041A05 is the main part of 150SV-SP Vertical Slurry Pump wet side. It works with the volute lining. The frame plate liner inserts and impellers are used to transport mud. And the frame plate has a replaceable wear-resistant metal lining plate or rubber lining plate. are a professional slurry pump parts manufacturer, Slurry Pump spare parts are a maintenance requirement when operating slurry pumps, and can t be ignored. offer suitable replace spare parts for original slurry pump, including heavy duty slurry pumps AH (R), M (R), high head slurry pump HH, light duty slurry pump L (R), gravel pumps, vertical sump slurry pump, and froth pump. Tobee have different materials, such as high chrome pump parts, dual-phase steel slurry pump parts, slurry rubber pump spares, polyurethane pump spare parts, slurry pump ceramic sapres, etc.
Vertical slurry pump named vertical spindle pump, Vertical sump pump, vertical cantilever pump. vertical submerged pump. Vertical sewage pump, Column pump as well. Impeller SP10206 - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary. Casing SP10092 - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR. Back Liner SP10041 - It forms a pump chamber with throat bush and volute liner where the slurry would flow through them, Tobee offers back liners are interchangeable with stardard pump back liners with high chrome, natural rubber, polyurethane for different working condition. Vertical Sump Pump Parts: Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing. Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered. Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected. Submerged Bearings - None Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye. Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
F5301, F53C1 Load pin with Thin-film technology to 200KN
F5308, F53C8, F53S8 Load pin, Heavy-duty version, thin-film technology from 10 KN
PP WOVEN BAG SIZE 50 CM TO 100 CM
PE Bags, PP Bags Size: Various sizes Thickness: Various thickness PE bags refer to bags made from polyethylene, which is a thermoplastic polymer. Polyethylene is the most common type of plastic and is widely used for various applications, including packaging. PE bags are known for their flexibility, durability, and moisture resistance. They are commonly used for carrying groceries, storing and transporting goods, and packaging. PP bags, on the other hand, are bags made from polypropylene. Polypropylene is another thermoplastic polymer that offers high strength, chemical resistance, and heat resistance. PP bags are commonly used for packaging purposes, particularly in industries where strength and durability are required. They are often used for storing and transporting items such as grains, cement, chemicals, and other industrial goods.
Loading Weight: 500 KG to 4500 KG Thickness: 60 mic to 300 mic In addition, we also accept custom orders, according to the requirements of customers. An anti-bulge PE liner bag serves a similar purpose to anti-bulge PE bags but is designed specifically for lining the interior of containers, such as drums, boxes, or other larger packaging units. These liner bags offer the following effects: Bulge Prevention: The primary function of an anti-bulge PE liner bag is to prevent bulging or expansion of the container. When the container is filled with contents, the liner bag helps maintain its shape and prevents deformation. This is particularly important when transporting or storing goods that may exert pressure on the container walls. Enhanced Product Protection: By preventing bulging, the liner bag helps protect the contents of the container from damage or deformation. It acts as an additional layer of protection, reducing the risk of product breakage, leakage, or spoilage during handling, shipping, or storage. Improved Stability: An anti-bulge PE liner bag helps stabilize the contents within the container. It minimizes shifting or movement of the products during transit, which can help prevent damage caused by impacts or collisions. This is especially beneficial for fragile or delicate items that require careful handling. Ease of Discharge: Liner bags can facilitate the emptying or removal of contents from the container. As the liner bag maintains the shape of the container, it allows for easy pouring or extraction of the contents without the need for excessive shaking or handling. Hygienic Barrier: Liner bags can provide a hygienic barrier between the container and its contents. This is particularly important in industries such as food and pharmaceuticals, where maintaining cleanliness and preventing cross-contamination is crucial. The liner bag acts as an additional layer that can be easily disposed of, ensuring a clean and sanitary environment.
Loading Weight: 500 KG to 4500 KG Thickness: 60 mic to 300 mic In addition, we also accept custom orders, according to the requirements of customers.
Loading Weight: 500 KG to 4500 KG Thickness: 60 mic to 300 mic In addition, we also accept custom orders, according to the requirements of customers. The effects of Jumbo lined PE bags include: Cargo protection: Jumbo lined PE bags have the ability to protect goods from dirt, moisture and external impacts such as shocks and shocks, helping goods to be better preserved. Cost saving: Jumbo lined PE bags have a large load capacity and can hold from several tens to hundreds of kilograms of goods, helping to reduce loss and save transportation costs. Easy to transport: Jumbo lined PE bags have an ergonomic design, easy to transport, move, stack and store. Wide range of applications: Jumbo lined PE bags are widely used in the production, trading and import and export activities of goods such as packing and transporting goods such as animal feed, fertilizers, chemicals. materials, cement, sand, stone, rice, wheat, corn and other raw materials. Resource saving: Jumbo lined PE bags can be reused many times, saving resources and protecting the environment.
