Material: Low carbon steel wire Wire: 3.0mm-6.0mm Mesh: 50*200mm,50*100mm, etc. Height: 1.2m-3m Width: 2-3m Post: 60*60mm,80*80mm,100*100mm, etc. Accessories: post caps, clips, nuts and bolts. Surface treatment: Hot dipped galvanized, PVC coated, Powder coated Packaging: Pallets Certificates: ISO9001, BV,SGS We can custom Welded Wire Mesh Fence Mesh Panel Fencing is also known as curvy welded fencing, triangle mesh fence,3D fence, etc. Welded wire mesh fence is pretty light yet durable, its composition is simply wire welded together to make a fence. The surface treatment of Welded wire mesh fence includes: hot-dipped galvanized, PVC coated, powder coated. Welded Wire Panel Fence is a type of welded wire mesh which has V-shaped strengthen bending curves. Welded Wire Panel Fence is made of high quality low carbon steel wire, galvanized wire. Then will be hot dipped galvanized,powder coated or pvc coated. Welded Wire Panel Fence looks modern and attractive. Mainly used for security protection in construction site, residential building, sports field, warehouse, highway or airport service area, railway station, etc. Welded Wire Mesh Fence Panels The welded wire mesh fence panels have a width of 2500mm and heights ranging from 600mm to 2440mm. There have vertical barbs of 30mm on one side and are reversible (barbs at top or at bottom). Mesh sizes are 200 x 50mm , and 100mm x 50mm for the beam sections. The heavy wires guarantee strength and rigidity.Different sizes can be made according to customer detailed requirements.
Trench Mesh All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place. Trench mesh is designated as x-L8TM, x-L11TM or x-L12TM. The x is the number of main bars.
Trench Rib Mesh All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place. Trench mesh is designated as x-L8TM, x-L11TM or x-L12TM. The x is the number of main bars. 3-L8TM has three bars, which are 8 mm in diameter. 4-L11TM has four bars, which are 11 mm in diameter.
Trench Mesh is made specifically for use in residential footing trenches. Made from grade D500L ribbed reinforcing wire, Trench Mesh is made using a variety of longitudinal wires up to 12mm diameter. Cross wires are â?¯at 300mm centres. Sheets are made in 6m lengths, with widths varying from depending on the number of longitudinal wires. The longitudinal wires are at 100mm centres. The product code, for example L8TM3, refers to the ductility grade (L), diameter of main wires (8) and the number of main wires (3). Other sizes are available, contact us for more information.
Application: 1. Home building fence 2. Home garden fence 3. Residential fence 4. Home animal fence 5. Home outdoor fence 6. Fences In Parks, Zoos and nature reserves 1.Material: low carbon steel wire 2.Coated: electric galvanizing, hot-dipped galvanizing, PVC spraying and PVC coating 3.Color: Standard colors are Green RAL6005 and Black RAL9005. Dark Green,Yellow ,etc .Other colors are available on request. 4.Features: corrosion resistance, aging resistance, sunshine resistance and weather resistance
According to different material and surface treatment. There is Hot-dip Galvanized Welded Wire Mesh, electro Galvanized Welded Wire Mesh, Re-drawing Welded Wire Mesh, PVC coated Welded Wire Mesh. According to different produce process. There is Welded Wire Fence rolls, Welded Wire Mesh Panel and Welded Mesh Fence Panels. Here is details of 1'' Welded Wire Mesh: Material: Low carbon Steel Wire, Galvanized Iron Wire, re-drawing Iron Wire. Hole patterns: Square hole Mesh size: 25.4mmx25.4mm Color: Silver Width: 0.5m to 2.0m Length: 5m to 30m.
Telï¼?86-0311-89277939 Email address: sales23@maishimfg.com marine grade 316 11 mesh 0.9 mm security mesh used near the sea MAISHI Wire Mesh Manufacture Group is a professional wire mesh manufacturer. And security screen mesh is our main product, which has passed a series Australian tests.We use marine grade 316 wire to produce the mesh. Welcome to contact us if you need marine grade security mesh. [ Material ] Stainless steel 316 It is high tensile AISI316 stainless steel wire, tolerance(+/-0.01mm), tensile strength is more than 900Mpa (900N). The holes are square and the wires are very strong (not sliding), screen surface is flattened after we weave the wires to mesh screen. Characteristic of security screen wire mesh: Safe: Not easy to cut and break pass AS5039-2008 Private live: No one can peep at room Beautiful: Gorgeous surface Durable: More than 10years Warranty pass AS2331.3.1-2001 Mesh Count: 11mesh, other specification as follows is also avaliable. [ Features of security screen mesh] Excellent flact surface High tension,Equal aperture and dia Corrosion resistance,easy to install 10 years not to corrode,face or bubble Black color filter 60% of UV rays
Product contact email: sales23@maishimfg.com Marine Grade 316 Stainless Steel Epoxy Coating Security Screen Mesh Maishi Group supply Security Doors and window. Security mesh can be used on window and doors to make your family far away from danger. Our mesh is made from high tensile stainless steel, woven into a fine mesh, it is hard to cut and break. And it has been passed a series Australia tests, you can believe our quality. [ Material ] Stainless steel 316 It is high tensile AISI316 stainless steel wire, tolerance(+/-0.01mm), tensile strength is more than 900Mpa (900N). The holes are square and the wires are very strong (not sliding), screen surface is flattened after we weave the wires to mesh screen. Characteristic of security mesh: Safe: Not easy to cut and break pass AS5039-2008 Private live: No one can peep at room Beautiful: Gorgeous surface Durable: More than 10years Warranty pass AS2331.3.1-2001 Mesh Count: as follows [ Features of security mesh] Excellent flact surface High tension,Equal aperture and dia Corrosion resistance,easy to install 10 years not to corrode,face or bubble Black color filter 60% of UV rays [ Maishi security mesh passes the below tests ] 1) Knife Shear Test(AS5039-2008) 2) Anti-Jemmy Test(AS509-2008) 3) Pull Test(AS5039-2008) 4) Durable more than 10 years(AS2331.31-2001) 5) 3006 Hour Salt Spray Tests, 534 hours UV Test We are China's top wire mesh manufacturer, our products are production prices, no middlemen to earn the difference! I hope that you can contact the opening email of our article.
Description: Bags on roll is a bag produced on a roll with/without paper or plastic core perforated for easy pulling every time using it. This bag can be flat lay with or without T-shirt handle depends on usage and folding Other names: poly tubing bag, perforated bag, household bag, star seal /C fold bag Material: made of HDPE from 7 micron or LDPE/MDPE from 20 microns and printing up to 6 colors by Gravure. Advantage: bags on roll are easy to use because they are perforated below the heat seal so they tear off easily and accurately to keep production rolling. Besides, these bags are designed to able to fold in star seal, C-fold help to keep them easily. These bags also have T-shirt handle that make them strong, durable and easy to carry merchandise. Usage: Ideal for fruit, vegetable, grocery, meat, or freezer in supermarkets, fruit and vegetable shops, household. Suitable for garbage bag and disposable bags in household, hospital, retail trade
This side seal cutting bag machine adopts micro-computer technology to display operation instructions on a touch screen. It also features photo-electric tracking, fixed length setting, accurate position stopping, and high speed bag production. Included with this machine is also an automated counter alarm. (L x W x H) 165 x 58 x 82.
High speed machine for making side seal bags Capable of running at 300 cycles/min Models Ss 600 delta Ss 800 delta Ss 1000 delta
High precision traverse mechanism, magnetic disk tension controlling, compact design and easy maintenance. 26600*31800*2600
Representing the latest design of loom, high precision and flexibility, top-quality and high value-added fabric, most economical weaving. Base machine: 3350kg 18082*1200*4742
Multi-dimensional cam, stable&advanced loom control system, intellingent warp feeding system with unitorm tension. 10244*2400*3615
Top-quality yarn, tenacity higher than 7g/d, compact and module design, micro-processor control whole line, superior price performance ratio. Space required: 7200*7700*5000
HDPE, LLDPE, blend material flat packed polybags
Dxdc8iv automatic tea bag packing machine Application: Automatic teabag packing machine model dxdc8Ⅳ is newest generation machine whose functions include filling, heat sealing, threading, labeling and overwrapping. This machine adopts sealing pads to replace the sealing rollers on old machines. The new system greatly improves machineµs flexibility for different packing materials and will supply best teabag package. Many kinds of packing material will get good performance on this machine such as paper/p.E, plastic/foil/p.E, plastic/p.E Technical parameters Output 1055bags/minute Max.Dosage: 8cm Bag dimensions 62.5mm+50mm Envelope dimension(mm) 80mm+70mm Tag dimensions (mm) 28mm+24mm Thread length 210mm Power supply ac380v Total power 2.36kw Weight 1210kg Overall dimensions(m) 1.688m+1.33m+2.205m Packing box dimensions(m) 1.84m+1.29m+1.89m
** Your reliable Blown Film Machine Supplier ** Professional in manufacture and design of BLOWN FILM MACHINES in Taiwan for 30 years, selling worldwide. We constantly devoting oursleves in innovation to upgrade the technology, helping customers to save their cost and have won customers' highest satisfaction with long term relationships. The Machine lines we have include : * Single Layer LDPE/HEPE Inflation Machine * Double Layer and Three Layer Co-Extrusion Blowing Film production line * Heavy Duty Container Bag Production Line * Embossing equipment ** More product information, please visit our website:www.king-plus.com.tw Please feel free to contact our head office for your requirements. Head Office : HANG KING PLASTIC MACHINERY CO., LTD. No. 56, Chong Cheng Road, Ming Hsiung Industrial Zone, Ming Hsiung, Chia-Yi, #621 Taiwan Tel:886-5-213-3116 Fax:886-5-220-2960 E-mail:hanking.bfm@msa.hinet.net www.king-plus.com.tw Export packing by container
Features: The recycle plant designed for reproducing general kind of waste products such as: waste pp/hdpe films, flat yarns, woven bags, woven sheets, bad quality products and so on. The production out is 80 kg/h-260 kg/h.
Wire mesh, stainless steel wire mesh, welded wire mesh, woven wire mesh, wire cloth, wire screen, wire netting, steel mesh, metal mesh, chain link fencing, gabion box, expanded metal mesh, perforated sheet mesh, perforated tube, filter disc, filter mesh, wire mesh fencing, hexagonal wire netting, galvanized wire mesh, aluminum wire mesh, alloy wire mesh, hardware cloth, expanded mesh grill, metal grating, chicken wire, coated wire mesh, conveyor belt mesh, insect screen, fly screen, temporary fence, titanium wire cloth mesh, vibrating screen.
