we have over 20.000 patterns in our archive. We are capable of generating products with unit weights between 0,5 to 8.000 kgs. We can produce 800 tons monthly. We aim to provide you with the highest-quality products and service quality with the shortest lead time.
Due to our flexibility and dynamism, we are proud of many long-term relationships with our customers. We place our customers first and create customer value as our primary aim.
The Standard Thimble: meet the performance requirements of Federal Specification FF-T-276b Type II,
Material And Process: Hot dip galvanized steel.
The standard choice for light duty applications and loading conditions
Available in Hot Dip galvanized or Stainless Steel (Type 304 or AISI315 ). Please click the Stainless Steel Standard Thimble
Stainless steel recommended for more corrosive environments where greater protection is required.
Greater protection against wear and deformation of the wire rope eye.
Code:
DS-WRT
Size:
1/8 - 1-1/4inch
Bond Marine Consultancy believes in carrying out the CFD simulations early in the designing process, just prior to manufacturing. We provide a world class surveying, technical investigation to the marine insurance, ship owners, flag states, ship managers and legal professionals. With a dedicated team of experienced and highly proficient engineers and naval architects, BMC can customize its naval design experience and abilities to suit the individual needs.
Our Products/ Spares include:
*OEM & Reconditioned Spares
We offer genuine and OEM reconditioned equipment and spare parts at competitive price.We also offer large selection of completely reconditioned and second hand equipmentâ??s and spares at a competitive price much lower than of the cost of genuine or OEM prices.Giving you excellent value for your money. All reconditioned parts are with in manufacturer tolerance and on buyers request we can get it them approved from required class.
*Engineering Products
Air Coolers and Heat Exchangers ( Evaporators, Lube oil heaters and Fuel oil heaters, FW and Lube oil cooler)With our associated facilities located in Shanghai, Just a telephone call our engineer will attend your ships for detailed measurement of heat exchanger and if we cannot find off the shelf we will fabricate.
- AIR COOLER
We can fabricate varieties of main &auxiliary enginesâ?? air coolers with high effective and compact construction for most types of engine such as MANã?�B&Wã?�SULZERã?�MARKã?�MTUã?�CUMMINS,PCã?�PAã?�DEUTZã?�STEYR and YAMQ etc.
- HEATER / CONDENSER
- AIR CONDITIONER EVAPORATOR
(high efficiency, small volume, erosion-resistance, and full series)
If there is a quality problem within 15 days, you can return and exchange the products.
Our company has many products in stock,which are immediately available.The
warranty is 1 years which apply to all the new products.If you purchase one
more parts from us,we can make a discount to you.
There have other products maybe you will want to choose as well.
* The 1x4 HDMI Splitter uses a single HDMI source accessing to multiple HDMI sinks. The Splitter allows one HDMI devices to be split easily to four HDMI compatible monitors or projectors. The Splitter can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.
* Support 3D and 1080P
* EP solution
94198 Industrial Goods Supplies Suppliers
Short on time? Let Industrial Goods Supplies sellers contact you.
GOLDLAND ELECTRONIC TECHNOLOGY CO., LTD focus on global Surface Mount electronic assembly sector for 10 years. We mainly provide competitive price and high quality products for various brands of SMT equipments, SMT feeders, SMT nozzles, SMT feeder spare parts, AI equipments, AI spare parts and other related products. The brands is: FUJI, KEM, PANASERT, YAMAHA, JUKI, Hitachi, Universal, Siemens, I-pulse, Assembleon, DYNAPERT, TDK and so on
We have large quantity stock and good source for Feeders/ feeder spare parts, feeder trolleys, Nozzles, Heads, Servo Motors, Drivers, Control boards and other related parts for Siemens/ASM/SIPLACE X-Series machine(such as: X4i S, X4 S, X3 S, X2 S,ect. ), KME CM402/ CM602/ NPM/ AM machine, FUJI NXT M3/M3S/M6/M6S/AIMEX series machine, YAMAHA YS/YG/YV series machine, JUKI KE2000/FX series machine, Universal Advantis/Genesis/GSM series machine, etc.
High Quality SMT 10300/UF10400 NXTII 16mm Intelligent Feeder Product Details:
The below NXT feeders are all in stock for sale:
W04b UF08600 UF08700
W8 UF02300 UF07700 UF00500 UF01300
W8(0402) UF04100 UF07800 UF04200 UF04300
W08c UF09700 2UDLFA0002 UF09800 UF09900
W12 UF00600 UF00700 UF01400
W12c UF10000 UF10100 UF10200
W16 UF00800 UF01500
W16c UF10300 UF10400
W24 UF00900 UF01600
W24c UF10500 UF10600
W32 UF01000 UF01700
W32c UF10700 UF10800
W44 UF01100 UF01800
W44c UF10900 UF11000
W56 UF01200 UF01900
W56c UF11100 UF11200
W72 UF05200 UF02500
W88 UF05300 UF02600
W104 UF05000 UF09600
GOLDLAND ELECTRONIC TECHNOLOGY CO., LTD focus on global Surface Mount electronic assembly sector for 10 years. We mainly provide competitive price and high quality products for various brands of SMT equipments, SMT feeders, SMT nozzles, SMT feeder spare parts, AI equipments, AI spare parts and other related products. The brands is: FUJI, KEM, PANASERT, YAMAHA, JUKI, Hitachi, Universal, Siemens, I-pulse, Assembleon, DYNAPERT, TDK and so on
We have large quantity stock and good source for Feeders/ feeder spare parts, feeder trolleys, Nozzles, Heads, Servo Motors, Drivers, Control boards and other related parts for Siemens/ASM/SIPLACE X-Series machine(such as: X4i S, X4 S, X3 S, X2 S,ect. ), KME CM402/ CM602/ NPM/ AM machine, FUJI NXT M3/M3S/M6/M6S/AIMEX series machine, YAMAHA YS/YG/YV series machine, JUKI KE2000/FX series machine, Universal Advantis/Genesis/GSM series machine, etc.
Diesel Oxidation Catalysts (DOC) is one of the most reliable ways to reduce pollutants of diesel particulate emissions. DOC technology controls emissions of hydrocarbons (HC), carbon monoxide (CO) and particulate matter (PM) from diesel vehicles.
Our Diesel Oxidation Catalysts (DOC) is made of cordierite material, which is raw material molding and synthesized cordierite after burning. DOCâ??s channels are unimpeded, the exhaust gas can flow it smoothly, then HC, CO, PM are oxidized rapidly under the catalyst (precious metal), noxious emission are reduced effectively and reach emission standard.
PCB Tungsten Carbide Rods For Micro Drilling BitsQuick DetailsGrain Size: 0.6μmLength: � 30mmTrade Term: CIF,Website:http://www.mariejcarbide.com,EXW,FOBGrade: YL10.2Virgin Material:100%Surface: PolishingDelivery Time: 3-20 daysOEM Service: AcceptableTrial Order: AcceptableProduct Description1. Various grades and dimensions with virgin material.2. Fast lead time with stable and good quality.3. Ungrounded and precision rods are all available.Tungsten Carbide Rods' Grades and PropertiesGradesISO CodeCobalt Content %DensityHardnessK10TK-5-K104.5-6.014.95-15.0592.7YG8K30814.889.5YG6K20614.9590.5YG6XK106149591.5YL10.2K301014.591.8YG13XK30-K401314.389.5YG15K40151487.5
Carbide Sintered Rods with One HoleQuick DetailsParticle:Sub-fine Grain SizeDimensions: OD6.0X330Trade Term: CIF,Website:http://www.mariejcarbide.com,Ground or BlankDelivery Time: 3-20 daysOEM Service: AcceptableTrial Order: AcceptableProduct DescriptionTungsten carbide rods are manufactured as standards with solid with no holes, one or two holes, straight or twisted to a 30 or 40 degree helix, both unground and precision-finish ground to h6 tolerance. A variety of highest quality carbide grades are available, mainly the industry-standard 0.8 micron 10% cobalt grade, other grade requirements are also welcomed.Detailed images:
Cemented Carbide Rods with Two HolesQuick DetailsParticle:Sub-fine Grain SizeDimentions: OD6.0X330Surface: Ground or BlankGrade: K1, K20, K30, C2, C6, YF06Virgin material:100%Trade term: CIF,EXW,FOBDelivery Time: 3-20 daysOEM Service: AcceptableTrial order: AcceptableProduct DescriptionTungsten carbide rods are mostly applied for drill bits, end mills, and reamers with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X, etc. Our Carbide rods have a good shock resistance and bending resistance in use.
Tungsten Carbide Rods For PCB ToolsQuick DetailsGrain Size: 0.6μmLength: 330mmTrade  Term: CIF,EXW,FOBGrade: YL10.2Virgin Material:100%Surface: PolishingTrial Order: AcceptableOEM Service: AcceptableDelivery Time: 3-20 daysProduct DescriptionTungsten carbide rods are mostly applied for drill bits, end mills, and reamers with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X, etc. Our Carbide rods have good shock resistance and bending resistance in use.Our Services1.We will try our best to reply our customersâ?? requests within 24 hours.2.We will maintain effective and efficient communications with our
The sisal twines are twisted by sisal yarns of 2 ply, 3 ply. With its features of even thread and strong texture, it is widely used in making carpet as longitude and woof, binding articles, as well as making crafts. We can serve our customers with various specifications of sisal twines, such as natural color, bleached color, dyeing color, and clipped sisal twine.
Soft brass wire wheel rush, the texture of copper wire is softer than steel, suitable for processing the workpiece with low hardness, removing the surface coating of the workpiece, rust removal and other purposes. And the metal activity of brass is low, has a certain corrosion resistance, the life time of the brush work in acid and alkali environment can be longer than ordinary iron wire and more easy to store.
For more information about brass wire wheel for grinder, please feel free to contact us!
If you are looking for a reliable industrial brushware limited, please contact us.
The hardness of Alumina crystal, the calorific value in the processing is small. At the same time the AlO has the advantages of high toughness, high durability. Aluminum oxide flex hone is especially suitable for processing the workpiece with high tensile strength, such as automobile engines, hydraulic holes and other precision instruments. Aluminum oxide hone has a certain acid and alkaline resistance, but it needs to avoid working in a strong acid and alkaline environment as far as possible. We will equip our aluminum oxide ball hone with various types of shank for customers to install on grinder, electric drills or CNC equipment.
Characteristics of Aluminum Oxide Flex Hone
High hardness, wear resistance, anti-scouring. Aluminum oxide flex hone is comparable to diamond, and its wear resistance is much higher than that of manganese steel and high branded cast iron, which can extend the service life of equipment by more than 10 times under the same working condition.
High temperature resistance, excellent heat resistance.
Acid and alkali corrosion resistance: stable chemical properties of alumina, acid and alkali corrosion resistance, anti-oxidation, Aluminum oxide flex hone adapt to a variety of harsh working conditions.
Light weight: Aluminum oxide flex hone can greatly reduce the equipment load.
Firm bonding, not easy to fall off. The use of high temperature resistant inorganic adhesive paste, arch joint and stud welding and other fixing methods, aluminum oxide flex hone can ensure that the ceramic piece in high temperature. High impact conditions of long-term operation does not fall off.
Application of Aluminum Oxide Flex Hone
Aluminum oxide flex hone is widely used in industrial production, especially used in thermal power, iron and steel, smelting, machinery, coal, mining, chemical industry, cement, port terminal and other enterprises of coal transmission, material transmission system, powder system, ash discharge, dust removal system and all other mechanical equipment with high wear and tear, such as ceramic liner, wear-resistant ceramic pipe, ceramic drum, etc. Customers can choose different types of products according to the needs of different working conditions.
We can also provide kinds of industrial brushware for sale, if you are interested, please contact us.
The Coir yarn is manufactured either with white or brown fiber and is manually or semi mechanically spun.It is used for Manufacture of mats / matting and carpets, rubber based brush mats / matting, netting / Geo-textiles (landscaping and on embankments of road construction for prevention of soil erosion).
Specifications
Packing: 3 kg Spools and 18.75 kg Spools
Size: 4 mm- 5 mm thickness ( 2 ply )
Machine twisted fiber (FMT) is made with natural coir fiber. They are mainly used in rubberized form for automobile seats, spring cover sheets in the bedding industry, Filtering material in the drainage industry.
Specifications
Packing : Coils
Weight : 20-26 Kg per 1 coil
Courles per meter : 58- 62
Moisture : Less than 20%
Size of a coil : Can be changed as per buyer?s requirement
Container Utilization : Approx. 20MT per 40` Container and Approx. 10MT per 20
94198 Industrial Goods Supplies Suppliers
Short on time? Let Industrial Goods Supplies sellers contact you.
