MCB series molded carbon block filter is made of PAC (powdered activated carbon) and polyester fiber, with high adsorbtion capacity and long service life. Molded blocking method results in lower carbon fine release and higher efficiency. Specification Comparing to traditional carbon block filters, molded blocking method makes it possible to bind PAC and polyester fiber together, capacity of adsorbtion is upgraded dramatically with the same cartridge size. MCB series filters can be used for drinking, commercial, and industrial water and industrial liquids purification, with standard sizes of 2.5"x10", 2.5"x20", 2.5"x30" , 2.5"x40", 4.5"x10" and 4.5"x20". FEATURES Molded block method Ultra high adsorbtion efficiency Long service life Low pressure drop TECHNICAL DATA Maximum temperature: 39.2-176 F (4-80 C) Recommend flow rate per 10 1.06gpm (4L/min) Maximum replacement p: 14.5psi (1.0bar) Service life per 10 5000G 1GPM Pressure drop:
Filter housings or cases made of 316L or SUS304 stainless steel, cartridge filter type filter housing, bag filter type filter housing, single or multiple filters. Specification Filter housings or cases made of 316L or SUS304 stainless steel, cartridge filter type filter housing, bag filter type filter housing, single or multiple filters. The filter can be cartridge filter, bag filter, HF high flow filters etc.
Glass Fibre Filtering Media Absolute Filtration Higher particle hold capability Used for mineral oils, hydraulic oils and lubrication oils Available in 3m ,6m 10m, 20m, 30m and many others on request Paper Filtering Media Made of paper and Cellulose High material stability and strength Available in 10 m & 25 m ,other micron ratings on request Stainless Steel Wire Mesh Filtering Media Nominal Surface Filtration Provides high resistance with Longer Filter Life and also Cleanable partially Available in 2 to 500m variety
High Flow pleated filter cartridge with 6" diameter and different end caps, usual lengths are 40" and 60", absolute rated 0.5micron, 1micron, 5micron, 10micron, 20micron, 50micron and 100micron, it's used as high capacity sediment filter for desalination and industrial applications. Specification MAIN TECHNICAL SPECIFICATION Maximum operation temperature: Glass fiber: 121C PP: 82C Maximum pressure drop: Glass fiber: 3.4bar at 121C PP: 3.4bar at 82C Recommended replacing pressure drop: 2.4Bar at 20C Suggested maximum flow of water: 20 inch: 660LMP 40 inch: 1300LMP 60 inch: 1900LMP TYPICAL APPLICATION Pre-filtration of RO, Pretreatment of sea water desalination Condensate water filtration, hot water recovery in power generation API, solvents and water filtration in Bio-Pharm market The filtration of bottled water, high fructose food oil, soft drinks and milk Paints and coatings, petrochemical, refineries Microelectronics, film, fiber and resin.
Pp spun cartridge filter , cotton yarn filter
Our resin trap filters can protect you from loss. Gradual loss of resin can go unnoticed, or it can be the disaster of accidentally delivering large amounts of resin to the production line. Bluslot's resin trap filter screen is designed and manufactured to meet your specific needs. Our flexibility in design creates many options. Customized services for various material products can be provided. Resin trap filter is used to install on existing and new filter bodies. To trap media and resin to prevent loss and prevent them from moving downstream. One end of the Resin trap filter is sealed by a stainless steel plate, and the other side has a flange. This design facilitates installation on equipment. It has continuous grooves and smooth surfaces. Resin collectors are usually made of corrosion-resistant stainless steel to avoid problems that often lead to accelerated corrosion. Johnson Wedge Wire Resin Trap Filter For Condensed Water Condensed water is radiant cooling on the surface of a surface or object, and condensed water on the surface of an object. Also in the industrial production process, the water is steam-cooled. In nuclear electric or pyroelectric condensed water treatment system, demand use resin trap. Resin particles that can be used and collected along with the water supply. After completing the use of the resin trap, use a specific cleaning device to clean it. Currently universally used resin trap strainer is a good finished work. Comprehensive main problems: Easy to stagnate, easy to rot, short service life. Our resin trap filter adopts special surface treatment process, more corrosion resistant. Possible to increase 35% service life. Resin Trap Filter For Wastewater Treatment Ion Exchange When using resin for online wastewater treatment, when the quality of the resin is poor (not strong enough), the water pressure disturbance is large (especially high pressure disturbance), and the resin cylinder wall is damaged, the resin will enter the entire water system. It will affect the normal operation of other equipment in the system, so a resin trap filter needs to be installed. The resin trap is mainly to install a filter screen with a pore size much smaller than that of the resin on the water system pipeline near the outlet of the ion exchanger and other equipment equipped with resin, and has a flushing function. When the resin passes, it can be intercepted and captured by the filter. At the same time, it is automatically rinsed through the differential pressure of the front and rear to discharge the captured resin out of the system. When using a filter to treat wastewater containing ion exchange resins (such as photovoltaic wastewater after ion adsorption), the filter may not completely treat the ion exchange resin or leak out. It will affect the normal operation of the subsequent equipment, cause the water terminal to contain ion exchange resin, and reduce the cleanliness of the water.
Spin down type sediment filter (pre-filter), with self washing vent valve, brass head, 1/2", 3/4", 1" NPT port options, and 40 micron stainless steel filter. STRUCTURE Pre-filter / Spin down water filter is suitable for wholehouse water treatment, works as pre-filter for all water consumption of a home. It is made of brass cap with standard in-let and out-let options of 1/2", 3/4", and 1" NTP threads with SUS 316 stainless steel filter and clear housing, with a vent valve on its bottom for self-washing purpose. Manufactured in China. FEATURES Small size Visible housing Easy to install to standard pipes Self washing, no filter replacement cost High flow rate MAIN TECHICAL SPECIFICATION Connection: 3/4", 1/2" and 1" threaded NPT Maximum operating Pressure: 0.8MPa (116psi) Working temperature: 5-40â??(41-140â??) Maximum flow rate: 2.6-4.2m�³/h Measurements: 60*90*200mm Pore size: 40-60 micron TYPICAL APPLICATIONS Pre-filter for wholehouse water supply Pre-filter for solar water heater Pre-filter for well water and river water
Taiwan made patented ISO 18184 anti virus anti bacterial thin for air conditioning car filter ...etc.
Model Number: UIYBSF247100A870T880NF Band Reject Frequency: 870 880MHz Pass Band Frequency: DC-860MHz 885 2500MHz Band Reject Rejection: 40dB VSWR:2.0 Insertion Loss: 2.0dB Power: 100W Connector Type: N-F Temperature:-20- 65
Type: Vehicle Oil Filters LM No. LMH-6615 Fits/Car Make: For HINO OEM No. 15601-78140 REF. No.: Materials: Durable Filter Paper Media, Long-lasting Plastic And Rubber,etc Size: Outer Diameter:20mm Inner Diameter:85.5/80.1mm Length:141.5/128mm Guarantee: 10000 KMS Certificate: ISO9001/TS16949 Shipping Port: Shenzhen or Guangzhou Port Packing: Neutral box or customized
Short pass filter allow the shorter wavelength throught, and cut off the longer wavelength.These filter mainly used in Beauty equipment, police multiband testing instruments, strong light flashlight, stage lighting shade, four-wheel, iris recognition system, face recognition attendance device, optical instruments. Diameter:2mm to 200mm. Diameter Tolerance:+0.00/-0.1 or customer size Material:N-BK7,H-K9L,Sapphire,Fused Silica(JGS1),Caf2,ZnSe,Si,Ge,etc. Surface Quality:80-50 to 10/5 Flatness :1 lambda to 1/10 lambda Thickness Tolerance:+0.00/-0.05mm Standard wavelength:270nm,311 360 380 473 650 780 8081064 and 1900nm. Transmission:7.5 m: Tavg 90%, Tmin 80% 1.57.m: Tmax 3% Transmission:60% to 99% Average blocking 0.1%,0.01%,0.001%.0.001
Narrow bandpass filter allow small light through, the narrower ,the more pure of the light.Sunday is producing standars narrow bandpass filter �?�¯ï¿½?�¼?270nm,3113603804735326507808088509049401064.1900nm,these filter can be used in Biometric, touch screen, automobile four-wheel positioning, medical equipment, bar code scanning, the infrared camera, night-vision goggles, laser ranging, fingerprint identification, laser system.
Model Number: UIYBPF6038A Frequency range: 1700~2600MHz Insertion Loss: 1.0 dB VSWR:1.5 Rejection:40dB@1300MHz&3000MHz 60dB@1000MHz&4000MHz Power:50W Connector Type: N SMA Temperature: -40~+85â?? Dimension:60*38*14mm UHF Band Pass Filter Frequency range 130-3000MHz, from 1MHz to full bandwidth. Military, space and commercial applications. Low insertion loss, high isolation, high power handling. Custom design available upon request.
1.Matetial available: PE ,PP ,PPS ,P84 ,Arimade , PTFE. 2.Weight: 500g per sqm or other weight. 3.Finish Treament: singe,calendering,heat setting, water oil repellent, PTFE membrane . 4.Price: please consulte. 5.Size: to be customized.
1.Matetial available: PE ,PP ,PPS ,P84 ,Arimade , PTFE. 2.Weight: 500g per sqm or other weight. 3.Finish Treament: singe,calendering,heat setting, water oil repellent, PTFE membrane . 4.Price: please consulte. 5.Size: 120mm*2000mm,130mm*3000mm,150mm*4000mm,160mm*6000mm.and other size to be customized.
Model Number:UIYBPF125125A Frequency Range:300~500MHz Insertion Loss:0.5dB VSWR:1.22 Rejection:60dB@Fc�±20MHz Connector Type N SMA Power:100W High RF performance, ultra-competitive price. Military, space and commercial applications. Custom design available upon request. Guaranteed for one year standard.
Ceramic filter is a new type, high efficiency, energy saving solid-liquid separation equipment, integration of electromechanical, automatic control, ultrasonic cleaning, micro-porous materials and other high-tech in one. Ceramic filter prominent features are: high efficiency, energy saving, good filtering effect, high degree of automation, low running cost, comprehensive utilization of filtrate, cake drying and moisture is adjustable, the filter medium strong adaptability, is widely used in non-ferrous industry, chemical industry, mining, metallurgy and environmental protection, sewage treatment, medicine, food, coal and other industries.
This faucet filter cartridge is a replacement cartridge of faucet filter system, it combines UF filter and activated carbon filter to remove chlorine and bacteria from tap water. Specification Faucet water filter cartridge is the replacement cartridge of faucet-mount filter, this cartridge filter combines UF membrane filtration and activated carbon purification, which removes free chlorine, odor, sediments, and bacteria from tap water. Features UF membrane filters out 99.99% of bacteria Activated carbon filter reduces free chlorine Easy replacement Long service life Technical data Temperature: 40-100F (5-38C) Flow rate: 0.4gpm (1.5L/min) Service life: 400G (1,500L) or 3 months
Our filter presses are supplied for a wide application in municipal & industrial wastewater treatment. Feed mud concentration always be 30%-40%, then mud will become mud cake and the humidity is around 20% after processed. LZZG filter press is a kind of Plate and Frame Filter Press, some now call it as â??Chamber Filter Pressâ??. Typically, no flocculant are needed to help dewatering on a plate filter press. Features 1. The structure is simple, the operation is easy and stable, and the maintenance is convenient. 2. Less wearing parts and low maintenance costs. 3. The filter area has a flexible sele 4. Compared with other types of dewatering machines, the mud cake has high solid content, small floor space, and convenient transportation and other post-treatment.
Fiber & materials used According to their specific usage environment, regarding the size of the suspended particles and ambient temperature, as well as the amount of air passing through the filter surface and the desired efficiency level, different raw materials used in production of the filters. Synthetic fibers are the most important raw material in this production line, which in turn includes a wide range of fibers. These fibers used in production of non-textured layers of filters and they are used for improving the physical properties and mechanical strength of the final products in the surface layer (screen) of the filters. The most commonly used fibers in this production line are: Polyester (PES) Nylon (NY) Polypropylene (PP) Aramide Adjectives (M_Acrylic) Graphite Fibers Metal fibers Polyacrylonitrile (PAN) Anti-Static Fibers Polyimid fibers (PPS)
