Industrial Filters Suppliers and Manufacturers

Class M5 to M6 Paint Booth Filter

M6 to F9 Rigid Pleated Box Filter

F7 to F9 Compact Mini-Pleated Filter

F7 to F9 W V Type Filter

G3 to M6 Pleated Pre-Filter With metal Mesh Introduction ---------------------------------------------------------------------- G3 to M6 Pleated Pre-Filter With Metal Mesh INDRO Polyester fiber G3-M6 pleated filter with metal mesh is special used as pre filter in air-condition system. Specs of G3-M6 Pleated Pre-Filter with Metal Mesh Type: Pre-filter Media: Polyester fiber Frame Material: Galvanized steel/Aluminum/ABS Recommended final pressure drop:  250Pa Temperature: 100Ã?ºC maximum in continuous service Thickness Pressure drop ï¼?Paï¼?at 2.5m/s (Inches) (mm) G3 G4 M5 M6 2 46 70 80 100 120 4 96 60 70 90 110  

G3 to G4 Pleated Pre-Filter with Paper frame 22 80 90 2 45  (Inches) 20Ã??20

G3 to M6 Pleated Pre-Filter With metal Support   Introduction ---------------------------------------------------------------------- G3 to M6 Pleated Pre-Filter With Metal Support INDRO Polyester fiber G3-M6 pleated filter with metal support is special used as pre filter in air-condition system. 1.    Specs of G3-M6 Pleated Pre-Filter with Metal Support Type: Pre-filter Media: Polyester fiber Frame Material: Galvanized steel/Aluminum/ABS Recommended final pressure drop:  250Pa Temperature: 100Ã?ºC maximum in continuous service Thickness Pressure drop ï¼?Paï¼?at 2.5m/s (Inches) (mm) G3 G4 M5 M6 2 46 70 80 100 120 4 96 60 70 90 110   Dimensions (W x H) Air Flowï¼?m3/hï¼?  (Inches)   (mm) at 2.5m/s 24Ã??24 592Ã??592 3400 24Ã??12 592Ã??287 1700 24Ã??20 592Ã??490 2800 20Ã??20 490Ã??490 2300   2. Features of G3-M6 Pleated Pre-Filter with Metal Support - 7 pleats/feet, 40% higher than normal panel filter - With holding frame, very strong and stable structure -Easy replacement of filter media by users. -Reusable holder and frame -Water washing is available when necessary. 3. Applications of G3-M6 Pleated Pre-Filter with Metal Support Special used as pre filter in air-condition system.  

E11 to H14 W V Type HEPA Filter Introduction ---------------------------------------------------------------------- E11 to H14 W/V Type HEPA Filter Ultra-fine glass fiber paper E11 to H14 W/V Type HEPA Filter is special used as final filter for industrial clean room and AHU Specs of E11 to H14 W/V Type HEPA Filter Type:  High performance "W" type filter Media: Glass fiber paper Frame Material: ABS/Galvanized steel/Stainless steel Separator: Hot melt glue Sealant: Polyurethane Recommended final pressure drop: 550Pa Temperature: 90Ã?ºC maximum in continuous service Thickness Pressure drop ï¼?Paï¼?at 2.5m/s (Inches) (mm) E11 E12 H13 H14 12 292 230 255 285 300   Dimensions (W x H) Air Flowï¼?m3/hï¼?  (Inches)   (mm) at 2.5m/s 24Ã??24 592Ã??592 3400 24Ã??12 592Ã??287 1700 24Ã??20 592Ã??490 2800   Features of E11 to H14 W/V Type HEPA Filter - Ultra-fine glass fiber paperï¼?good stability of filtration efficiency - Pleat distance: 3 mm, pleat height: 27 mm, bring lower resistance and longer life -With protective mesh at the side of installation handle, provide adequate protection for filter -ABS and metal frame are available. -Individually tested according to EN 1822   Applications of E11 to H14 W/V Type HEPA Filter Ultra-fine glass fiber paper E11 to H14 W/V Type HEPA Filter is special used as final filter for industrial clean room and AHU http://www.kosafiltration.com/./E11_to_H14_W_V_Type_HEPA_Filter.html

IR filter, 8H scratch-resistant, customized to fit requested spectrum.

UV-Cut filter, block UVA & UVB, available in screen protector, anti-shattering film or front cover.

+ Optical Blue glass color filter for projector and QB1 QB2 QB3 Filter Worldhawk can provide precision filters for many applications, including bandpass interference filter, Cut off filters, UV bandpass filter, Narrow bandpass filter, ND filter, Negative Filter or Notch filters, dichroic, color substrate. Optical Filters are used to selectively transmit or reject a wavelength or range of wavelengths. Optical Filters are used in applications such as fluorescence microscopy, clinical chemistry, spectroscopy, or machine vision inspection. Optical Filters are ideal for life science, imaging, industrial, or defense industries. Custom filters are available for both large manufacturing needs and in prototype volumes. Contact us for more information or to arrange a quote.

Characteristic Product Name G050060025 Specification: Length: 50.0±1.0mm Outer Diameter: 6.0±0.1mm Inner Diameter: 2.5±0.1mm Appearance: no stain and crack; no impurities; no oxidation. Voltage: can be customized according to customers needs Electrode: Electrodes are welded with nickel wire can be customized according to customers needs Lead tension: horizontal pull 5KGf Vertical tension 3KGf High-voltage insulation test: 3700V/1S leakage current 0.62mA Insulation resistance: >100M 500VDC Characteristic

product name Filter Standard Filter for adult Application adult Viral retention 99.99% Baccterial Vieal Filter ID / OD Standard or can be customized Moisture Loss (mg/L) 5.7 @Vt 500ml

BY filter has been in filtration industry for more than twenty years. We specialize in producing all kinds of industrial air filter cartridges, filter fabrics, dust collector filter bags, filter press cloth, liquid filter bags or water filter elements, HVAC filters, air slide fabric, filter bag cages and so on.

wenta ZR903501 High Filtration Air Outlet Filter, Grey, Rowenta ZR903501 High Filtration Air Outlet Filter, Grey, 171 x 114 mm

Design Code:ASMEVIII-1 Design Pressure: Up to 16 Mpa Precision:0.5a100um Filtration Efficient:99.99% Diameter Range:DN150aDN1000 Material Code: From ASME & ASTM Main Body:CS & SS as per exporting package for customers

01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.

Manufacturer Henan UTERS Industrial Technology Co.,Ltd Brands UTERS / Negotiable Filter Type Hydraulic Oil Filter Element Size Data Please contact our sales manager if you need to confirm parameters. End caps Material Galvanized Carbon Steel; Stainless Steel; Nylon Plastic; Aluminum Machining And Other Standard Materials Frame Material Galvanized Carbon steel punching frame; stainless steel punching frame, etc. Filter Material 304 Stainless Steel Mesh; Glass Fiber; Oil Filter Paper And Other Standard Materials Filter Accuracy 1~100um; filtration ratio: Xâ?§100. Collapse Pres. 21bar~210bar Filter Media Conventional Hydraulic Oil, Lubricating Oil, Fuel, Etc. Operating T. -30â??~+100â?? Structure Strength 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa. Position On the suction line, pressure oil line, return line, bypass, and separate filter system. Application Steel, Electric Power, Metallurgy, Shipbuilding, Aviation, Papermaking, Chemicals, Machine Tools And Construction Machinery, Construction Machinery And Other Fields. Packing Plastic bag inside,paper box outside / Negotiable Transportation DHL, UPS, FEDEX, SF And Other International Express, By Air, By Sea, Or Special Line Services. Production Time 10 Work Days After Payment / Negotiable Warranty 12 months/ 365 days after shipment. Testing Standard ISO 2941 Filter element-Test method for filter element rupture resistance ISO 2942 Filter Element-Test Method for Structural Integrity of Hydraulic Filter Element ISO 2943 Filter Element-Test Method for Compatibility of Hydraulic Filter Element Material and Liquid ISO 3723 filter element-end-to-end compliance test ISO 3724 filter element-determination of fatigue characteristics ISO 3968 Filter Element-Differential Pressure Flow Characteristics ISO 4572 Filter Element-Multiple Pass Method for Determining Filtration Characteristics

Product Description Item: Oil Filter Assenbly Part number: 1012100-E06 Car make: Great Wall Wingle Place of Origin: China Brand Name: Haolu Warranty: 1 Months MOQ: 50pcs Payment: Union.Paypal TT Certification: ISO9001 Packing: Neutral Packing Quality: Original chip Delivery time: 3-7 Days Shipping Term: DHL / UPS / Aramex / China post /by Sea Application: Supply Ability: 100000 Piece/Pieces per Month Related product We provide full parts of GREAT WALL, ZHOGNXING, CHERY, DFM, ZOYTE, GEELY, LIFAN, L, JMC, CHANGAN, WULING, FOTON, JAC, FAW Our advantage 1. High quality with best price. 2. Sample order is available. 3. We will reply you for your inquiry in 24 hours. 4. Strict test for each part 5. we give warranty for each every product.

Instructions for use 01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.