A melt polymer filtration system is essential in many applications where polymers are processed or used, such as in the production of PET/PA/PP polymer industry, pre-polymerizaton, final polymerization, filament yarn, polyester staple fiber spinning, BOPET/BOPP films, or membranes. This system helps remove impurities, contaminants, and viscosity-affecting particles from the molten polymer, ensuring the quality and consistency of the final product.
Polymer films have a wide range of applications due to their properties and are commonly used in industries such as packaging, electronics, automotive, and biomedical as protective coatings, barrier layers, electronic device encapsulation, or as substrates for flexible displays. Technical Specifications Working pressure: â?¤31.7MPa Working temperature: â?¤300â?? Medium viscosity: â?¤260Pa.s Allowable pressure differential: â?¤10Mpa Type: Center ring welding type(hard hub) Center ring type(soft hub) Media material: Stainless steel sintered fiber, multi-layer sintered stainless steel wire, sintered metal powder
It is made of metal mesh with different mesh sizes that are stamped , then assembled in a certain order into the already processed edge wrapping ring and finally pressed. Its function is to filter the molten material flow and increase the resistance of the material flow, so as to filter out mechanical impurities and improve the effect of mixing or plasticizing. It has properties such as acid resistance, alkali resistance, temperature resistance, and wear resistance; it is mainly used in mining, petroleum, chemical, food, medicine, machinery manufacturing, Chemical fiber spinning and other industries.
Technical Characteristics 1. Resistant to high temperature, high pressure and chemical corrosion. 2. Excellent breathability, large dirt holding capacity, high strength, good sealing, long life, and can be cleaned and reused for repeated use. 3. The folded filter area is 3-5 times that of the cylindrical type. 4. Working temperature: -60-500. 5. The maximum pressure difference the filter element can withstand: 10MPa. Product Typical Application Parameters 1. Working pressure: 30Mpa. 2. Working temperature: 300 . 3. Dirt holding capacity: 16.9~41mg/cm
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
We use the most advanced anti-corrosion efficient ultra-fine fiber coagulation material as the filter body, so that the compressor output air 3m above the solid particles can be all filtered, and very little about 0.01-m oil and water dissolved in the filter When the condensate into a larger oil droplets, accumulated in the bottom of the filter, and then through the bottom of the filter tank back to the siphon pump back to the lubrication system so that the compressor discharge more pure, oil-free compressed air. Technical Parameters 1. Filtration efficiency 99.999% 2. Service life 3500-5200 hours 3. Filtration accuracy: 0.1�¼s 4. Filter material used US HV company glass fiber 5. Compressed air oil content can reach 3ppm or less We also supply other replacement brands air compressor filter: Atlas Copco air compressor filter element Ingersoll Rand air compressor filter element Fusheng air compressor filter element SULLAIR air compressor filter element CompAir air compressor filter element LIUTECH air compressor filter element Screw air compressor Pipe line filter element isused to filter different dismissal of stainless dry stock,corrosion resistance, superior structural performance; seam welded for extra strength, low resistanceto flow. Different accuracy levels of different filter structure,a new "matrix blended fiber" media, larger effective surface area, improves capurerate, enhanced filtering effect. Coated closed cell foam sleeve with resists chemical attack from oils and acids, ensures high efficiencies by preventing reentrainment of coalesced liquids. Advantages: 1.Duarbility and longevity 2.Beautiful design 3.High quality with reasonable price 4.Afford good service 5.Produce according to your sample or drawing 6.Each product individually tested Features: 1.Type:Precision Filter, Filter 2.Filter material: imported fiberglass, filter felt 3.Filter accuracy: 0.01um 4.Application: air compressor 5.Weight:0.5kgs 6.service time:8~12 months 7.sealing material:NBR, VITON 8.Oil content:0.003ppm 9.Flow rate:5Nm³/min
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
uters Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
