We allow you custom-made special filters in a variety of structures and specifications. You just need to send us drawings, designs, samples, or descriptions and we will develop them for you.
Sintered Porous Plastic is a semi-rigid, open-cell porous material made by a process known as sintering. It is permeable to fluids, the permeability being adjustable. Porous Plastics have magnificent elasticity, high physical strength, and are lightweight providing a rugged easily handled part. Plastic materials are formed by sintering for applications that require materials of specific porosity. Sintered plastic porous components are used in filtration and to control fluid and gas flows. Our porous tube is strong at various wall thicknesses with the ability to withstand high pressure. Also, the plastic material is resistant to many chemicals and a wide range of temperatures.
FAFS magnetic filter is used to remove iron contaminants (such as rust, and iron filings) and other fine ferromagnetic impurities, which can effectively improve the purity of products on the production line and protect key equipment from iron particles. FAFS magnetic filter adopts a three-dimensional finite element analysis method to optimize the magnetic circuit design and distribution of the magnetic bar. The core magnet is the neodymium iron boron super magnet material produced by the latest technology. And the surface magnetic field intensity peak is greater than 12,000 Gauss, which is the world's highest-grade material. FAFS Magnetic Filters are used for the filtration of iron particles from products in liquid/slurry. Magnetic rods/elements used in filters are made up of either High-intensity Rare Earth magnets (neodymium magnet also known as NdFeB, NIB, or Neo magnet). Magnetic filters are used in various industries to solve the problems encountered in production.
Sintered ceramic materials are formed by the Sintering method in this method ceramic powder particles heat to the green compact part to a high temperature below the melting point when the material of the separate particles diffuses to the neighboring powder particles. FAFS Ceramic Filters are used for the protection of Gas Turbines and the reduction of emissions from environmentally - conscious Coal Fired, electric power stations.
FAFS sintered bronze parts are rigid, temperature-resistant, and high-strength parts formed through the process of sintering, or powder metallurgy. Bronze is an ideal material choice for the process of sintering as it is a non-ferrous metal that is commonly used as a conductive material. Sintered bronze parts are an economical manufacturing option, especially for large quantities of products as sintered metal parts can be fabricated repeatedly with close tolerances. Its porosity allows air, lubricants, and liquids to pass through it. The porosity of the parts can also be adjusted according to the intended application of the part and the desired level of flow.
FAFS Sintered filter are the best filter products which widely used in Industrial Filtration. Sintered Stainless Steel Filter Cartridges and discs are produced by irregular stainless steel powder processing, formed by cold isostatic pressing, molding, etc. which gives high porosity also stability to the material. We also deal with sintered fiber/felt which is widely used in the machining industry for oil filtration and also used in various industries as filtering media. Sintered Stainless Steel filters are able to withstand high differential pressure across the filters and are recommended for the filtration of air, gas, and liquid at higher operating temperatures & corrosive environments.
SLK7002NFP Sterilizing-Grade Filter Cartridge for the PharmaceuticInal industry N66 sterilizing-grade filter cartridges feature high-strength pure Nylon 6,6 membranes for higher sterility assurance. In wide use for almost 20 years, these filters have a proven record of performance in the production of sterile biologicals and pharmaceuticals. High-area pleated into single open-ended (SOE) AB sanitary style cartridges, Ultipor N66 sterilizing-grade filter cartridges are available with ratings from 0.45 �µm for LVPs, reagents and viscous fluids, 0.2 �µm for sterile products and intermediates, 0.1 �µm for sterilization and mycoplasma removal from biologicals, to 0.04 �µm for sterilization and virus reduction from biologicals. Features and Benefits Intrinsically water wettable Fixed pores, non-shedding Resin and surfactant-free Broad solvent compatibility Low filter extractables High-area for long-life High protein recovery from most protein solutions Repeatedly steamable in situ Note: These filters are also available in Kleenpak Nova capsule format.
Orther MP-Filtri model number: CU025A03N CU040A03N CU100A03N CU250A03N CU630A03N CU850A03N CU200A03N CU350A03N CU730A03N CU2101A03ANP01 CU2102A03ANP01 CU2103A03ANP01 CU4002A03ANP01 CU4003A03ANP01 CU4004A03ANP01 CU4005A03ANP01 CU4006A03ANP01 CU900A03ANP01 CU9502A03ANP01 CU9503A03ANP01 CU025A06N CU040A06N CU100A06N CU250A06N CU630A06N CU850A06N CU200A06N CU350A06N CU730A06N CU2101A06ANP01 CU2102A06ANP01 CU2103A06ANP01 CU4002A06ANP01 CU4003A06ANP01 CU4004A06ANP01 CU4005A06ANP01 CU4006A06ANP01 CU900A06ANP01 CU9502A06ANP01 CU9503A06ANP01 CU025A10N CU040A10N CU100A10N CU250A10N CU630A10N CU850A10N CU200A10N CU350A10N CU730A10N CU2101A10ANP01 CU2102A10ANP01 CU2103A10ANP01 CU4002A10ANP01 CU4003A10ANP01 CU4004A10ANP01 CU4005A10ANP01 CU4006A10ANP01 CU900A10ANP01 CU9502A10ANP01 CU9503A10ANP01 CU025A16N CU040A16N CU100A16N CU250A16N CU630A16N CU850A16N CU200A16N CU350A16N CU730A16N CU250M90N
More Hydac filter part No.: 1300 r 010 bn4hc 0060d003v 0060d005bh 0060d005bhhc 0060d005bh3hc 0060d005bh4hc 0060d005bn 0060d005bnhc 0060d005bn3hc 0060d005bn4hc 0060d005p 0060d005v 0060d010bh 0060d010bhhc 0060d010bh3hc 0060d010bh4hc 0060d010bn 0060d010bnhc 0060d010bn3hc 0060d010bn4hc 0060d010p 0060d010v 0060d020bh 0060d020bhhc 0060d020bh3hc 0060d020bh4hc 0060d020bn 0060d020bnhc 0060d020bn3hc 0060d020bn4hc 0060d020p 0060d020v 0060d020w 0060d020whc 0060d025w 0060d025whc 0060d050w 1300 R 005 ON U/CE 0060-D-003-BN4HC 0060-D005-ON 0060-D-010-BN/HC 0060-D010-BN4HC 0060-D010-ON 0095-D-010-BN4HC 0100-DN-006-BN4HC 0100DN010-BN4HC 0110.R.010.BN4HC/-V 0110.R.020.BN4HC 0110-D010-BN3HC 0110-D010-BN4HC 0140-D-005-BN4HC 0160.R.010.BN4HC/-V 0160-D-005-BN4HC 0160-D-010-BH3HC 0160-D010-BN4HC 0160-D020-BN3HC 0160-D020-BN4HC 0160-D-025-W/HC 0160-DN-010-BN4HC 0160-DN-025-W/HC 0160 MA 00 3BN 0160MA005BN 0160MU003M 0165-R-010-BN4HC 0240 D 010 BN/HC 0240-D-003-BN3HC 0240-D005-BH4HC 0240D010BH4HC 0240-D-010-BN3HC 0240-D-010-ON 0240D100W/HC 0240-R-010BN/HC 0240-R-010BN/HC-2 0250-DN-010-BN/HC-V 0250-DN-025-BN4HC 0280-D-005-BH4HC 0280-D010-BH4HC 0280-D-200-W/HC 0280-R-010-BN4HC 0330-D003-BH4HC 0330-D005-BN4HC 0330-D010-BN4HC 0330-R-003-ON 0330-R-005-ON 0330-R-010-BN3HC 0330-R-010-ON 0330-R-020-ON 0400DN003-BN4HC 0400DN010-BN4HC 0660-D-010-BH4HC 0660-D-010-BN4HC 0660-D-020-BN4HC 0660-R005-BN/HC 0660-R-010 BN3HC 0660R010BN4HC 0660-R020-ON 0660-R050-W/HC-V 0750-R-005-ON 0750-R-010-ON 0850-R-010-BN4HC 0850-R-010-BN3HC 0850-R-010-ON/PO 0850-R-020-BN4HC 0950-R-005-ON 0950-R-010-BN4HC 0990-D-010-BH4HC 1300 R 050 W/HC./KB 1300 R 100 W/HC/KB 1300-R-001-ON 1300-R003-BN-AM 1300-R-003-ON 1300-R-005-BN3HC 1300-R-005-BN4HC 1300-R-010-BN4HC 1300-R-020-BN4HC 1300-R-050-W/HC 1320-D-005-BH4HC 1320-D-010-BH4HC 1700-R010-BN4HC 1700-R-010-BN4HC 2600 R 010 ON/KB 2600-R-003-BN3HC/KB 2600 R 020 ON/KB 2600-R-003-ON 2600-R-005-BN4HC 2600-R-010-BN4HC 2600-R-020-ON LH0660D005BN/HC N15DM002 N15DM020 N15DM010 N50DM010 N5DM001 N5DM005
HYDAC Hydraulic Filter is mainly used for the hydraulic system filtration of the rolling mill and continuous casting machine and for the filtration of lubrication equipments. It is also used for oil refining, product separation and recycling during chemical production, well water injection in oilfield and dust removal, particles filtration in natural gas. Features of Replacement Germany Hydac Filter Element 1. Material: HV fiberglass 2. Filter accuracy: 5um 3. Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa 4. Application field: hydraulic system, lubrication system 5. O-Ring: NBR, fluororubber Quality assurance of Hydac Filter Element ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Quality assurance of Hydac Filter Element ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing If you have some demands of filtersï¼?please add my whatsapp +8617638329680. I will give you best service.
Product Features: 1. The combination of surface filtration and deep filtration can significantly reduce the number of filter elements and significantly reduce the size of the supporting shell compared to ordinary filter elements; 2. The filter layer is made of high-efficiency and low resistance materials, which can achieve ultra-high filtration efficiency of over 99% and extend the service life of the filter element; 3. The design of the convenient handle significantly reduces the time for replacing the filter element, making the replacement of the filter element simple and portable. 4. The overall polypropylene design and hot melt welding treatment effectively prevent the end cover from falling off and secondary pollution. 5. The design of the sealing interface reduces the risk of side flow and ensures the sealing and reliability of filtration; 6. The foldable design increases the filtration area, resulting in a significantly lower pressure drop than ordinary filter elements, 7. The design with a large diameter increases the capacity for pollutants, prolongs the service life, and reduces production costs; 8. Equipped with a skeleton to enhance the pressure resistance of the filter element during use; Working principle: The high flow filter element is designed with a large diameter for efficient filtration, and has a high-strength support skeleton both inside and outside. It is made of multi-layer composite progressive filtering materials, and is integrally hot-melt welded with an external sealing ring. Designed with a single flow rate of 50-90m3/H, this high flow filter is suitable for fields such as large-scale reverse osmosis pre filtration. The new patented folding of this filter element combined with a 6/152mm large diameter design reduces the number of filters and the requirements for filter housing size. At the same time, multiple filtering media can be provided to meet other application requirements.
Feature of self cleaning filter  Filter precision from 100um to 3500um,big filter area,high sewage carrying capacity,customized product. Simple turn-of-a-handle cleaning of the filter screen,adjust the parameter of the automatic cleaning system.Automatic cleaning. Has motor overload protection, which can effectively protect the motor. Eliminates the need for turning off the water and extracting the filter screen for rinsing.No interruption of the process water flow during cleaning,Low pressure loss:less than 1%. Easy to maintenance,installation and disassemble. Flange connections to the user's pipeline, national standard flange, versatility. How to choose the suitable one of Automatic self cleaning brush filter 1.water flow rate 2.Chemical characteristic of fluid 3.SS of fluid 4.filter precision 5.Pipe pressure 6.Working pressure 7.Direction of flow 8.drainage way
All Kinds of Bag Filter and Medium Filter Grade: F6/F7/F8/F9 Manufacturer and Supplier
All Kinds of Pre/Primary Filter, Grade: G4 Manufacturer and Supplier
Filters and Column Frits are made with certified quality materials for uniform pore size distribution and maximum column efficiency. The most important characteristic of a frit, besides the diameter and the thickness, is the porosity. When considering porosity, it is not only the average size of the pore that is of interest, but also the size distribution and the amount of pores available. The size distribution should be a function with narrow tolerances. , we continuously monitor our manufacturing process and maintain strict control of the powders used in our process in order to provide the tightest pore distribution possible. In addition to pore distribution, it is important to consider the pore density, or number of pores available. Although the porosity may be within specification, it is unlikely that this frit would provide adequate flow. Careful control of our powders and process allows Filters to offer the best pore size distribution while maximizing flow properties.
102 60 side shell, approximate overall height 8-9 16 manway, 8, inlet & outlet connected to the distribution header and collection laterals 4 media drain with 1.5 screened water drain 3 flanged water drain in sideshell above media level and 3 flange in manway 2 PVC air relief valve 3 air scour system (QTY:2, New)
60 side shell, approximate overall height 8-9 Manufacturer: Astral 16 manway, 8, inlet & outlet connected to the distribution header and collection laterals 4 media drain with 1.5 screened water drain 3 flanged water drain in side shell above media level and 3 flange in manway 2 PVC air relief valve 3 air scour system (QTY:2, New)
After-sales Service Provided:Return and Replacement Warranty:None Application:Outdoor, Hotel, Commercial, Household, Household Power Source:Manual App-Controlled:NO Type:Sediment, Home Appliance Parts Use:Filter for Sinks, Shower, Toilet seats Power (W):0 Voltage (V):0 Place of Origin:Daejeon, South Korea Brand Name:FilterTech Model Number:MicroMATRIX Screw Type 15mm 1/2" Product name:MicroMATRIX Screw Type 15mm 1/2" Function:cleans water Material:sediment
SPECIFICATIONS:LSBPF3-C-229-A Frequency range:3.7 4.2GHz Insertion loss: 0.5dB VSWR: 1.5 Average input power: 10W Impedance: 50 ohms Rejection: 25dBc@3.625-4.25GHz 60dBc@3.55-4.35GHz 70dBc@3.5-4.4GHz Waveguide Flange:FDM40/CPR229G(input),FDP40/CPR229F(output) Dimensions(LxWxH)mm:120 x 100 x 70 Weight: 700g Environmental conditions: Operating temperature -40 ~85 Storage temperature -65 ~125 We supply Filter,Diplexer,Combiner,Coupler,Antenna 30MHz-50GHz for RF and Microwave with high quality and competitive price. Hope to cooperate with you!
APPLICATIONS Rejects terrestrial interference in U-Band (Radar and U-Band transmitter) Easily installed Low Insertion loss Small size Innovative Communication Solutions Customized Solutions Microwave Component U-Band Band Stop Filter Environmentally sealed and moisture resistant (IP66) SPECIFICATIONS:LSBSF3-U-23-A Frequency range:47 50.1GHz&50.5 53GHz Insertion loss: 1dB VSWR: 1.5 Average input power 400W Impedance: 50 ohms Rejection:â?¥25dBc@50.2-50.4GHzï¼? Waveguide Flange:FAM400/UG383(input),FAP400/UG383(output) Dimensions(LxWxH)mm:80 x 30 x 30 Weight:â?¤300g Environmental conditions: Operating temperature -40 ~85 Storage temperature -65 ~125 We supply Filter,Diplexer,Combiner,Coupler,Antenna 30MHz-50GHz for RF and Microwave with high quality and competitive price. Hope to cooperate with you!
