Product Introduction Stainless steel pleated filters cartridge is a type offilter elementthat is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants. Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases. parameters Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request. Filter rating 1-300 microns Flow rate: 80-200l/min Working pressure:1.5 bar-250 bar Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc. Working temperature: 600 Features 1. High Strength Against High Differential Pressures 2. Large Surface and Filtration Area 3. Washable and Reusable 4. Excellent Heat and Corrosion Resistance
Stainless steel porous gas sparger/diffuser is also called sintered metal distributor, also known as porous metal distributor. In order to make sure that the air bubbles are distributed equally throughout the container, it is an industrial sparger instrument that distributes gas into a liquid tank. The surface is normally metallic gray, the dense part is a bright surface, the powder sintered part is a normal matte surface, the sintered part does not add any additives in the production process, normal vacuum sintering, the powder is naturally bonded and formed, the aperture is formed naturally, and there is a certain pressure ability. Stainless steel porous gas spargers/diffusers are commonly used for stripping, mixing or diffusion in many gas-liquid contacting applications. So whether it's for beverage carbonation, ozone treatment or chlorine bleaching, it can always help you to increase the efficiency of spraying. The sintered porous metal media is durable enough to last a long time, providing repeatable performance cycles. Product parameters Materials: Stainless Steel 304L/316L, Inconel, Hastelloy, Copper Connection Type: M5 thread with O-ring groove, 10-32 UNF thread, hose barb, NPT, butt weld end Porosity: 15%-55%
Product Introduction The stainless steel pleated filter element is a high-efficiency filter material. Due to its unique process characteristics, it has been widely used in filtration and separation in water treatment, food and beverage, pharmaceutical, and other fields. The manufacturing process of the stainless steel pleated filter element is to use high temperature and high pressure to pass the stainless steel wire mesh through pressing rollers, dies, etc. to form a folded structure, and then process it into filter materials of various specifications. Product parameters Filtration accuracy: 0.1-200 microns Diameter: 60mm, 80mm, 100mm Length: 250mm, 500mm, 750mm, 1000mm Filter element material: stainless steel 304, 316, etc. Filter structure: single-layer, multi-layer, multi-layer composite structure Operating temperature range Maximum pressure: 1.0MPa, 1.6MPa, 2.5MPa Features 1. High-efficiency filtration: The structure of the pleated filter element is tighter than that of the ordinary filter element, which can better filter out fine particles and improve filtration efficiency. 2. Good washability: Since the material of the stainless steel pleated filter element has good corrosion resistance and high temperature resistance, it is not easy to be damaged during the cleaning and can be recycled many times. 3. Long life: The stainless steel pleated filter material has excellent corrosion resistance and high temperature resistance, so it has a long life and can greatly reduce material replacement and maintenance costs.
Stainless steel pleated filter element is a high-efficiency filter material. Due to its unique process characteristics, it has been widely used in filtration and separation in water treatment, food and beverage, pharmaceutical and other fields. The manufacturing process of the stainless steel pleated filter element is to use high temperature and high pressure to pass the stainless steel wire mesh through pressing rollers, dies, etc. to form a folded structure, and then process it into filter materials of various specifications. Product parameters Filtration accuracy: 0.1-200 microns Diameter: 60mm, 80mm, 100mm Length: 250mm, 500mm, 750mm, 1000mm Filter element material: stainless steel 304, 316, etc. Filter structure: single layer, multi-layer, multi-layer composite structure Operating temperature range: 40 C 200 C Maximum pressure: 1.0MPa, 1.6MPa, 2.5MPa Features 1. High-efficiency filtration. 2. Good washability. 3. Long life. Applications Due to its high-efficiency filtration, good washability and long life, stainless steel pleated filter elements have been widely used. Among them, in the field of water treatment, such as tap water filtration, mineral water filtration, sewage treatment, etc., the application of stainless steel folded filter elements is more common.
Sintered titanium porous plate for PEMFC is a porous material that is created from high-quality, spherical, and high-purity titanium powder as the raw material. It is rigidified by forging and sintering it at high temperatures. Low density, high specific strength, good corrosion resistance, and good biocompatibility are the qualities of sintered titanium porous plate for PEMFC. Parameters: Brand: TopTiTech Materials: pure titanium powder Filter rating: 0.22um-100um Porosity: 25-45% Penetrability: 3-800M /M hKPa Working pressure: 2.5MPa Working temperature: 300 Shape: Round disc sheet tube round bar cap Specific surface area: 10-40cm /cm Features 1. High flow rate, high resistance to high temperatures and pressures. 2. Resilient to the majority of corrosive fluids. 3.Even pore distribution and good air permeability. 4. Stable form and strong component strength. 5. Very strong mechanical resistance. 6. Consistent filtration precision even after numerous washings. 7.Backwashing assistance with minimal manual upkeep and expense. According to their physical and structural characteristics, titanium sintered porous materials are mostly used for filtering materials, electrodes, heat-transfer materials, catalyst carrier materials, and noise-cancelling materials. What exactly does sintering entail? It is the process of combining small particles into a single solid without actually melting the material by applying pressure and heat to the mixture.Ceramics, metals, plastics, and a few other types of materials are among the particles that can be sintered together. This procedure is particularly crucial in creating discrete particles as a unit.You can make sintered metal filters with it. The high temperature heating of the compaction contacts causes the constituent materials to fuse together as the materials eventually become wet.The temperature of the furnace, the temperature of the atmosphere and the temperature of the contacts are all in the heat and are the critical elements of the process.
Titanium rod filter element is a porous filter element made of industrial high-purity titanium, which is formed by sieving, cooling and isostatic pressing, and then sintered at high temperature and high vacuum. It has outstanding qualities such as corrosion resistance, high temperature resistance, high strength, ease of filtration accuracy assurance, and ease of regeneration. It is suitable for the filtration of various corrosive media, such as: hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium. Technical Parameters Filtration accuracy: 0.22um-100um Porosity: 30-40% Air permeability: 0.02-20M3cm/m2h Compressive strength: 0.5-1.5Mpa Temperature resistance: 280C (wet state) Maximum working pressure difference: 0.6Mpa Diameter: 30mm 50mm 60mm Length: 5 inches 10 inches 20 inches 30 inches 40 inches Interface form: M20 M30 222 226 DFPD (double flat port) Filtration accuracy: 0.45m, 1m, 3m, 5m, 10m, 20m, 30m, 50m, 80m, 100m Features 1. High temperature resistance Generally, it can be used normally under 280 degrees. 2. Uniform and stable precision Uniform structure, narrow pore size distribution, high separation efficiency, high porosity, low filtration resistance, high penetration efficiency. 3. Resistance to corrosion Chemical stability, acid and alkali corrosion resistance, and oxidation resistance are all strengths. 4.A large filter area In accordance with food hygiene and pharmaceutical GHP criteria, there is no particle shedding and no secondary polluting of the original solution. 5. Longevity It is easy to clean, can be regenerated online, and has a long service life (generally several times that of membrane filter elements). Applications 1. It is employed in the pharmaceutical business for decarbonization filtration in the concentrated preparation of big infusions, tiny injections, eye drops, and oral liquids, as well as security filtration prior to terminal filtration in diluted preparations. 2. Impurity removal and filtration in the raw material production process, decarbonization filtration, and fine filtration of materials. 3. Ultrafiltration, RO, and EDI security filtration in the water treatment business, as well as filtration following ozone sterilization and ozone aeration. 4. Clarification and filtering of beverages, liquor, beer, vegetable oil, mineral water, soy sauce, and vinegar. 5. Filtration and recovery of ultrafine fine particles and catalysts, precision filtration following resin adsorption, and impurity removal and filtration of system heat transfer oil and materials, catalysis Gas rest purification, etc. are all processes used in the chemical industry to decarbonize liquid products, liquid raw materials, and pharmaceutical intermediates.
Sintered stainless steel filter discs, also called sintered metal porous filters, adopt stainless steel 316, 316L powder as raw materials and then produced through sizing, molding and sintering processes. Sintered stainless steel filter discs have found widespread use in industries such as environmental protection, petroleum, natural gas, chemical, environmental detection, instrumentation, pharmaceutical equipment, and others. Product Parameters Material:304, SS 316L, stainless steel Max pressure:5MPa Max temperature:600 degree Types:disc, plate, cup, tube cartridge, irregular Diameter Size:2.0 mm to 450 mm Height Size:1.0 mm to 100 mm Pore Size:stainless steel (0.2-120um) Product Features 1. Superior to conventional metal filter materials in terms of shape stability, impact resistance, and alternating load capacity. 2. Air permeability, with a stable separation effectï¼? 3. High loading and unloading strength, making it suited for usage in high temperature, high pressure, and corrosive situations 4. Particularly suited to high-temperature gas filtration; 5. Products of various shapes and precision can be customized according to user requirements, and can also be used for various interfaces by welding. Applications When the filter cake on the surface of the sintered metal powder filter element reaches a certain thickness, due to its high-strength performance characteristics, the filter element can be cleaned by backwashing or backflushing through a certain reverse pressure, so that the filter element can be used again. . Because of its many characteristics and the characteristics of repeated cleaning and reuse, it is widely used in water treatment, petrochemical filtration, seawater desalination, chemical filtration, resin and coating, hydroelectric power generation and other fields.
Product Introduction The metal microporous filter cartridge processed by stainless steel irregular powder can be isostatically pressed, molded and extruded. It has good permeation filtration performance and high filtration accuracy, as well as certain strength and toughness, and can be used at a high temperature of 600 C. The metal microporous filter cartridge is mainly used in basic industries such as petroleum, chemical industry, and environmental protection as filter materials, porous electrode materials, sound-absorbing materials, shock-absorbing materials, divergent cooling materials, catalysts and catalytic reduction materials, antifreeze and buffer materials. Product Parameters Material: SUS304, 304L, 316, 316L Shape: tube, plate, sheet, disc, ring, rod and cone Filtration accuracy: 0.22um-100um Applicable temperature: 600 Porosity: 30%-40% Thickness: 1.0mm-10mm Length: customized Features 1. High porosity The pore size is uniform, easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, and long service life. 2. High mechanical strength It is easy to install and use, easy to maintain, good in assembly, and can be welded, bonded and machined. Uniform pores, ideal for situations needing high consistency, such as fluid dispersion and homogenization treatment. Good mechanical performance, low pressure difference, large flow rate, pressure filtration and suction filtration, and simple operation. 3. Good molding process The total unwelded length is up to 1200 mm. Stainless steel powder products are manufactured at one time without cutting, resulting in a high effective utilization rate of raw materials and maximum material savings. It is particularly suited to components with huge batch sizes and complex architectures. Package and Shipment Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation.
Sintered stainless steel filter discs, also called sintered metal porous filters, adopt stainless steel 316, 316L powder as raw materials and then produced through sizing, molding and sintering processes. Sintered stainless steel filter discs have found widespread use in industries such as environmental protection, petroleum, natural gas, chemical, environmental detection, instrumentation, pharmaceutical equipment, and others. Product Parameters Material:304, SS 316L, stainless steel Max pressure:5MPa Max temperature:600 degree Types:disc, plate, cup, tube cartridge, irregular Diameter Size:2.0 mm to 450 mm Height Size:1.0 mm to 100 mm Pore Size:stainless steel (0.2-120um) Product Features 1. Superior to conventional metal filter materials in terms of shape stability, impact resistance, and alternating load capacity. 2. Air permeability, with a stable separation effect 3. High loading and unloading strength, making it suited for usage in high temperature, high pressure, and corrosive situations 4. Particularly suited to high-temperature gas filtration; 5. Products of various shapes and precision can be customized according to user requirements, and can also be used for various interfaces by welding. Applications When the filter cake on the surface of the sintered metal powder filter element reaches a certain thickness, due to its high-strength performance characteristics, the filter element can be cleaned by backwashing or backflushing through a certain reverse pressure, so that the filter element can be used again. . Because of its many characteristics and the characteristics of repeated cleaning and reuse, it is widely used in water treatment, petrochemical filtration, seawater desalination, chemical filtration, resin and coating, hydroelectric power generation and other fields.
The stainless steel filter element is a kind of filter material with high strength and overall rigidity, which is made of multi-layer metal sintered mesh, which is made of multi-layer stainless steel mesh after special laminated pressing and vacuum sintering. The pores are interlaced to form a uniform and ideal filtration structure. The stainless steel pleated filter element is folded by special stainless steel wire mesh. The pleated process makes the filter element have a large filtration area, high dirt holding capacity and high flow rate. Each seal adopts argon arc welding process, no leakage, and can be used in high temperature and high pressure filtration environment. The stainless steel filter element has excellent performance, and the filter element can be cleaned repeatedly. Products Parameters Main filter material: SS316 SS304 SS316L SS304L Main filter media: stainless steel fiber sintered felt and stainless steel woven mesh Regular outer diameter: 25 30 35 50 60 63.5 65 100 150mm (customized) Regular inner diameter: 25 30 35 50 100 150mm (customized) Length: Generally 5", 10", 20", 30", 40" (customized) Interface form: 222 226 215 M36 M28 M24 M22 M20 threaded interface Maximum working temperature: 500 Filtration accuracy: 1-200um Working strength: 0.1-30MPa Processing: The sealing surfaces of the filter element are joined by argon arc welding process, and the filter layer adopts multi-fold folding process to form a complete filter element without leakage and medium shedding. Features 1. The precision filter element made of stainless steel has high porosity, excellent air permeability, low resistance, and low pressure difference; 2. The stainless steel precision filter element's filter area and dirt-holding capability are both substantial after folding; 3. The high temperature resistance, corrosion resistance, and suitability of the stainless steel precision filter element for high viscosity liquid filtering; 4.Effective renewal; 5.All-stainless steel construction; broad chemical compatibility; 6.6. Reusable after chemical, high temperature, and ultrasonic cleaning. Applications Environmental protection, petroleum, chemical, medical, high temperature gas filtration, scientific research, metallurgy, food, machinery, and other sectors use stainless steel pleated filter elements extensively. 1. Filtration of various high temperature and corrosive liquids in the petroleum and chemical sectors; 2. Filtration and purification of various polymer melts in the chemical fiber and film industries; 3. Thorough filtration for mechanical equipment of different hydraulic oils and lubricating oils; 4. In the pharmaceutical, biological, beverage, and other sectors, the clarification and filtration of various liquids.
Product Introduction The Sintered SS 316 Wire Mesh Filter Pipe, is a brand-new kind of filter material, composed of multi-layer metal sintered mesh, which has high strength and overall rigidity. The meshes of the net are interlaced to form a uniform and ideal filtering structure. The Sintered SS 316 Wire Mesh Filter Pipe is generally divided into five layers, which are divided into four parts: protective layer, filter layer, separation layer, and support layer. This type of filter material has a high degree of strength and rigidity, as well as uniform and steady filtration precision. It is an ideal filter material for occasions that require high requirements and uniform filter particle size. Products Parameters Materials: SS304 SS304L SS316 SS316L Filtration accuracy: 1-300um Temperature resistance: -200 ~ 650 General Thickness: 1.7mm General Size: 500mmX1000mm, 1000mmX1200mm Compressive strength: 2-3Mpa Products Features A wide variety of accuracy in filtering Have dependable filtering performance from 1 to 300 Filtration accuracy is stable The filter layer�´s wire mesh is resistant to deformation because of the protection provided by the top and lower layers of wire mesh and the sintering process of diffusion and solidification Corrosion protection high temperature resistance below 650�°C. It has a high level of corrosion protection because SS316, SS304, and other materials are used It is simple to clean Surface filter material is used, making it simple to clean and particularly suitable for backwashing Products Application Stainless steel sintered mesh is a new type of filter material with high strength and overall rigidity made of stainless steel mesh through special lamination and vacuum sintering. The meshes between the layers of mesh are interlaced to form a uniform and ideal filter structure. Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
Yoyik lube station filter LY-10/10W-40 hydraulic tank suction strainer for Vietnam Thermal Power Our company mainly serves thermal power plants, hydroelectric power plants, metal mines, coal mines, steel plants, cement plants, petroleum, chemical, natural gas industry. All along, our company serves for many domestic large-scale construction projects to provide a lot of supporting services with first-class quality product, preferential and thoughtful service. We have set a good image and credibility to our customers. We hope to cooperate with domestic and foreign partners in the related areas. Yoyik can offer many spare parts for power plants as below: #DF-lube station filter LY-10/10W-40 hydraulic tank suction strainer-DF aquarium water filter DLS-300 filter HBX-25*1 air filter manufacturer QUQ5 centrifugal oil filter WUI-A400Ã??50FS china cartridge filter HX-250Ã??40 filter FBX (TZ)-1300*1 Air filter BDE200F2W2.X/-RV0.003 hydraulic return oil filter SDGLQ-30T-100 hydraulic duplex oil filter HX-25Ã??40W filter HX-10*20Q oil and filter change cost Z1203126 water purifier filter KLS-65T/80 hydraulic oil filter remover DRF-9002SA pp pleated filter cartridge SG125/0.8 oil filter Q2U-A63*10BS high pressure hydraulic filter C9209013 machin oil filter element SDGLQ-50T-36K filter TZX2.BH-1000*10 filter element cartridge HY-130.0163-0029Z oil filter house FX-510 180 pp melt blown filter machine MSL-32 hydraulic spin on return line filter HC9600FKZ13Z BFP lube filter XLY-25-48W coalesce filter LXM-15-50 hydraulic oil filter machine AP3E301-04D10V/-W EH oil main pump oil inlet filter HY-100-003 large flow filter element KRYJ155X700 best oil filter TZ-1300 20 air filter cartridge QU-Q3-20*2.5 filter water purifier CCX-15-5 air breather filter QUQ5 FILTER ELEMENT, OIL, OF3-20-3RV-10 filter NX-250*20 precision filter JLX-75 water filter system DLS-700 filter SFX-850*5 lube station filter LY-10/10W-40 hydraulic tank suction strainer filter HDX-63*10Q3 oil filter XUI-A10*30S filter NX-160*3 pleated filter cartridge SFBX-25Ã??30 pp filter core SGLQB-1000 filter water KLS-50T/80 water cleaning filter KLS-65T/80 pp cartridge filter SWF1 melt blown cartridge filter SG-125/0.8 pp spun filter cartridge making machine WFF-150-1 DFYL-2023-3-17-MY
The Sintered SS 316 Wire Mesh Filter Pipe, is a brand-new kind of filter material, composed of multi-layer metal sintered mesh, which has high strength and overall rigidity. The meshes of the net are interlaced to form a uniform and ideal filtering structure. Stainless steel sintered mesh is generally divided into five layers, which are divided into four parts: protective layer, filter layer, separation layer, and support layer. This type of filter material has a high degree of strength and rigidity, as well as uniform and steady filtration precision. It is an ideal filter material for occasions that require high requirements and uniform filter particle size. Product parameters Materials: SS304ã??SS304Lã??SS316ã??SS316L Filtration accuracy: 1-300um Temperature resistance: -200 ~ 650â?? General Thickness: 1.7mm General Size:500mmX1000mm, 1000mmX1200mm Compressive strength: 2-3Mpa Features 1. A wide variety of accuracy in filtering. Have dependable filtering performance from 1 to 300; 2. Filtration accuracy is stable. The filter layer's wire mesh is resistant to deformation because of the protection provided by the top and lower layers of wire mesh and the sintering process of diffusion and solidification; 3. Physical power. It has high mechanical strength and pressure resistance thanks to the fourth and fifth layers' reinforcement; 4. It is simple to clean. Surface filter material is used, making it simple to clean and particularly suitable for backwashing; 5. Resistance to high temperatures. 6.Corrosion protection; high temperature resistance below 650�°C. It has a high level of corrosion protection because SS316, SS304, and other materials are used; 7. It is simple to process. appropriate for cutting, twisting, Application Stainless steel sintered mesh is a new type of filter material with high strength and overall rigidity made of stainless steel mesh through special lamination and vacuum sintering. The meshes between the layers of mesh are interlaced to form a uniform and ideal filter structure. Widely utilized in the food and pharmaceutical sectors, particularly in two-in-one and three-in-one medical devices. 1. Precise filtration of various hydraulic oil lubricants in the machinery industry; 2. Filtration and purification of various polymer melts in the chemical fiber film industry, filtration of various high-temperature and corrosive liquids in the petrochemical industry, and filtration of corrosive liquids in the pharmaceutical industry filtration, washing and drying of materials; 3. The use of fluidized plates in the steel business and gas homogenization in the powder industry; 4. Distributors in explosion-proof electrical appliances, etc.
The sintered powder metal filter is made of metal powder pressed through a mold and then sintered at a high temperature. It has the advantages of high mechanical strength, high-temperature resistance, good corrosion resistance, uniform pore size distribution, good air permeability, cleanable regeneration, welding, machining, etc. The sintered powder metal filters are widely used in gas-liquid filtration and separation in the fields of the chemical industry, medicine, beverage, food, metallurgy, petroleum, environmental protection and fermentation, dust removal, sterilization, and oil mist removal of various gases and steam; gas buffer, etc.
2UUL uuFilter Fume Extractor Soldering Smoke Absorber. 2UUL Mini Soldering Smoke Cleaner Dust Purifier Smoke Purification Fume Extractor Air Cleaner Filter Dedicated for Phone Repair. Feature: 1. Installation is simple and convenient, without the need for alternative pipes, is conducive to the clean and beautiful working space. 2. Triple filter design to ensure that the filter out the harmful substances in the smoke, to protect human safety. The pre-filter, medium-efficiency filter and main filter can be replaced individually, extending the life of the main filter. 3. Built-in air circulation filter to avoid indoor air / heating exhaust to the outside world, the real meaning. 4. To save energy, at the same time meet the national environmental requirements. High-power DC brushless motor, air volume, long life. 5. Low noise design. 6. Extension-type station design, air volume adjustable, directional duct adjustment, positioning freely.
The sintered powder metal filter is made of metal powder pressed through a mold and then sintered at a high temperature. It has the advantages of high mechanical strength, high-temperature resistance, good corrosion resistance, uniform pore size distribution, good air permeability, cleanable regeneration, welding, and machining, etc.. The sintered powder metal filters is widely used in gas-liquid filtration and separation in the fields of the chemical industry, medicine, beverage, food, metallurgy, petroleum, environmental protection and fermentation, dust removal, sterilization, and oil mist removal of various gases and steam; gas buffer, etc. 1. Titanium powder sintered filter elements Porous and sintered uniform structure, high porosity acid and alkali corrosion resistance, high temperature resistance to 600 filtration precision is 0.22-100um 2. Stainless steel powder sintered filter elements  porous and sintered stainless steel 316L powder high temperature resistance to 300 acid and alkali resistance easy to clean and replace 3. Copper powder sintered filter elements  Material: copper powder Shape: sheet, tube, cup, plate, etc. Filtration precision: 3.0-90 m precise pore size, uniform distribution Applications 1. Filtration/Separation of Liquid and Gas 2. Spargers Examples of Uses for Sparging Carbonization of Soda Carbonization of beer Stripping of Edible Oils from Oxygen 3. Breathing Ports 4. Sensor protection 5.(Throttling/Dampening) Flow Control 6. Exhaust mufflers 7. Pressure/Flow Equalization
SUS316L five-layer sintered filter mesh is a widely used sintered mesh with standard structure. It is a new type of filter material made by stacking five layers of stainless steel sintered mesh in sequence and vacuum sintering. Generally, it is a five-layer structure, which is divided into five parts: protection layer, filter control layer, dispersion layer, support skeleton layer, and skeleton layer. The standard five-layer sintered mesh filter has the characteristics of strong corrosion resistance, good permeability, high strength, easy cleaning and back cleaning, uniform filtration accuracy, hygienic and clean filter material, and no shedding of the wire mesh. Sintered mesh has a wide range of applications, suitable for various filtration, separation, fluid bed, powder transportation, dust removal and explosion protection, and can be used in petrochemical industry, metallurgical industry, pharmaceutical industry, water treatment, food industry, environmental protection, machinery industry and other industries. Product parameters Standard thickness: 1.7MM Standard material: stainless steel 304, 316, 316L Standard size: 500*1000MM, 600*1200MM, 1000*1200MM Note: On the basis of 5 layers of sintered mesh, add a layer of 12 mesh screen to become 6 layers of sintered mesh, with a thickness of 3.5MM, better pressure resistance. Five-layer structure display Features 1. Strong tensile strength and stiffness It has a high mechanical strength, excellent processing, welding, and assembling capabilities, and is simple to use. 2. Consistent and uniform precision It has a high mechanical strength, excellent processing, welding, and assembling capabilities, and is simple to use. 3. A wide range of applications It can be utilized in temperatures ranging from -200 �°C to 600 �°C, as well as for acid and alkali filtration. 4. Outstanding cleaning performance It has a good countercurrent cleaning effect, can be used frequently, and has a long service life (it can be cleaned by countercurrent water, filtrate, ultrasonic, melting, baking, etc.). 5. Excellent performance Excellent mechanical performance, pressure and suction filtration, ability to satisfy various filtration needs, and ease of operation. Application fields 1. In the machinery business, precise filtration of different hydraulic fluid lubricants; 2. Filtration, washing, and drying of materials in the pharmaceutical business; filtration and purification of various polymer melts in the chemical fiber film industry; filtration of various high-temperature and corrosive liquids in the petrochemical industry; 3. Use of fluidized plates in the steel sector and gas homogenization in the powder business; 4. Distributors of electrical appliances that are explosion-proof, etc.
Getter is a material that can absorb residual miscellaneous gas and water vapor and fix the atmosphere. Its main function is to absorb residual gas and increase the degree of vacuum to ensure a good vacuum state. Titanium sintered porous getter is a non-evaporable room temperature getter material. It has the advantages of high activity and good air absorption at room temperature. After activation, it can quickly and effectively absorb oxygen, nitrogen, hydrogen, carbon monoxide, carbon dioxide, methane, water vapor, etc. Among them, hydrogen absorption is reversible, usually inhaled at 500�°C, and clean hydrogen is released above 500�°C. Does not absorb inert gases such as helium, neon, and argon. The getter can be repeatedly activated and regenerated, and has a long service life. The sintered titanium getter is made of spherical titanium powder as raw material, which is sintered in high temperature vacuum after compression molding. Therefore, it has high porosity and good mechanical strength. Product parameters Product nameï¼?Titanium Sintered Porous Getters Brandï¼?TOPTITECH Materialï¼?Titanium powder Porosity : 30% - 40% Function: Absorb residual gas Size: Customized Product features 1.High gas pumping speeds The material's intricate network of pores offers a sizable surface area for gas molecules to interact with, enabling the getter to efficiently and quickly remove leftover gases. This makes titanium sintered porous getters a well-liked option in situations where high pumping rates are necessary, including in the fabrication of vacuum tubes or semiconductors. 2.Chemical stability The getter does not release the trapped gases back into the vacuum environment when it combines with the remaining gases in the vacuum system, instead creating stable titanium oxide or nitride compounds. As a result, the getter is a good and dependable way to get rid of leftover gases in vacuum systems. 3.Compatibility A variety of vacuum materials, such as glass, ceramics, and metals, are very compatible with titanium sintered porous getters, including these. They may be utilized in a number of vacuum system configurations because to their interoperability, which also makes it simple to integrate them into existing systems. 4.Long lifespan Titanium sintered porous getters have a long lifespan and can keep working efficiently for a long time, decreasing the need for routine upkeep and replacement. They are a practical choice for many vacuum system applications because of their longevity. Product application 1.Getter for high vacuum 2. Getter for vacuum pair glass 3. Getter for ultrahigh purity gas purifying 4. Getter for VIP ( VIP Vacuum Insulation Panel )
High-porosity metal nickel fiber felt is a patented product, which is a three-dimensional nickel felt made of metal nickel fiber developed in chemical and metallurgical processes. The purity of nickel fiber felt is 99.5%. It is a new material with light weight, good flexibility, adjustable porosity and felt thickness. Metallic nickel felt is made of micron-sized pure nickel fiber in accordance with international technical standards, through a special felting process and ultra-high temperature vacuum sintering process. Compared with nickel mesh or nickel powder sintered plate, nickel fiber felt has a good three-dimensional network porous structure, high porosity, large specific surface area, uniform pore size distribution, strong corrosion resistance, good water permeability, good heat dissipation, and current density high, low voltage, stable performance, long life and other advantages. Widely used in fuel cells, military industry, aerospace, civil, medical and other industries. Especially hydrogen fuel cell diffusion media: anode diffusion layer (GDL) for proton exchange membrane (PEM) water electrolysis. Product parameters Color: light gray Size: Customized on request Thickness: 0.2mm-2mm common thickness (0.25, 0.4, 0.5,0.6, 0.8, 1.0mm) Porosity: 60-70% (can be customized upon request) Shape(can be customized) polygon,round,ring,disc,etc. Product Features Good electrical conductivity High mechanical strength Good chemical stability Strong corrosion resistance Large specific surface area The fibers in the sintered fiber mat are overlapped with each other, and each fiber is welded with several fibers. The overlapping points are in a slightly fused state, and the entire fiber mat forms a complete conductive network with excellent electrical properties. And it also has a large specific surface area, which is mainly determined by the characteristics of the preparation process of the nickel fiber felt. The drawn fiber itself has a large surface area, and the fiber is laid into a net to form a network structure that is evenly overlapped with each other. Manufacturing flow Nickel wire Cluster drawing Nickel fiber Fiber shear Air-laid Sintering Nickel fiber felt Application fields Filter materialPhotocatalyst series air filter screenChemical catalyst and support materials Battery electrode material Heat exchange and adsorption materials
Aqua Fair String-Wound Filter Cartridges Aqua Fair filter cartridges offer true depth filtration with superior filtration technology. Aqua Clear depth filters have revolutionized filtration with a superior technology that overcomes the limitations and drawbacks of other filters. Aqua Fair technology produces superior depth filters with increased filtration capacity, longer lifetime, and higher performance that reduce overall costs. Aqua Fair filters have high structural integrity combined with a greater void volume, giving a lower pressure drop, much improved dirt holding capacity and efficiency compared to conventional filters. Aqua Fair filters are made of polypropylene, a recognized environmentally safe and recyclable material for purity and ease of disposal. Pure polypropylene Aqua Fair filter cartridges are free from any extractable and contain no lubricants, wetting agents, emulsifiers, ant-oxidants or anti-static agents, etc. They are suitable for use in applications like RO pretreatment (SDI reduction), drinking water and beverage processing, sea water desalination, gas purification, electronics and electroplating, photographic solutions, oil and gas production (deep well injection of produced water and wastewater disposal), cooling tower water filtration, etc. The standard pure polypropylene cartridge is extractable-free and engineered for superior filtration performance. It has been certified by ISO 9001:2015 to NSF/ANSI Standard 61 for Drinking Water System Components. Available in up 10 inch (1828 mm) length and 2â??3/8 inch (60 mm) diameter.
