CNG cascade consists of a series of natural gas cylinders,steel frame,valves,pipelines and high pressure fittiong.Priority sequence control panel can also be installed according to customers.
CNG cascade is used for ground storage of compressed natural gas.The steel cylinders with 250 bar operation pressure are widely used so far.
A single CNG cylinder can be delivered with bags,while,cng cascade can packaged with wooden cases.
Steel based CNG storage with 200 bar maximum pressure.We offer various sizes of CNG storage systems based on the 200 bar cylinder or other larger tanks.
The most common requirements are single cylinder, manifold cylinder pack of 15 cylinders. Other configurations are also possible.Each cylinder has a maximum void space capacity of 150 litres and a storage pressure rating of 200bar.
For these tanks, the CNG gas must be dried prior to storing in the cylinders.
Features:
1. CNG cylinder cascade is commonly installed in utility companies or other locations including automotive service stations, bus depots, and fleet garages.
2. The CNG storage cascade has good features of robust build quality, higher pressure for vehicles.
3. CNG storage cascade should keep from rain and fierce sunlight. In addition, it should be away from fire source and high temperature.
4. The operating pressure of CNG cascade is 250 bar.
It can enter into container,we adopt simple and rain-proof package.
Our website: alsafegascylinders point COM
I'm Shirlybai, just write me to the following address: shirlybai at alsafegascylinders point COM
Product Name: Beverage CO2 gas cylinder
Manufacturer: Liaoning Alsafe Technology Co., Ltd.
Specification: LW-203-13.4-15-H
Standard: ISO7866 or DOT 3AL
Certificate: CE, TS
Third party Inspectors: TUV, CSEI, SGS
Filling content: Food grade CO2
Color: Aluminum
Outside surface treatment: Transparent painting
Thread: 1.125-12UNF
Valve: QF-35C
Form A, Form E avaliable.
Features:
¡¡èMade by aluminum 6061;
¡¡è40% lighter than steel cylinders;
¡¡èNo magnetism;
¡¡èHigh corrosion resist and special inner surface treatment, ensure beverage gas clean and smelless, ideal for food grade CO2 storage;
¡¡èStable performance;
¡¡èWidely used in Beer systems, Carbonated beverage machines, etc.;
¡¡èChoice of worldwide top brands and enterprises.
We can also produce other specifications according to your requirement.
Quality & Safety
1. We have established the quality guarantee system according to the Requirements for Boiler and Pressure Vessel Manufacturing Licensing of China and obtained the certificate issued by General Administration of Quality Supervision, Inspection and Quarantine of the P.R.C (AQSIQ), qualified to manufacture B1 and B3 grade pressure vessels.
2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (TUV, CSEI for example) before mass production, including bend test, drop test, hydrostatic test, etc. according to relevant standards.
3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.
4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.
Our website: alsafegascylinders point com
I'm shirly bai. You can also write me to the following address: shirlybai at alsafegascylinders point com
Product name: m6 oxygen gas cylinder
Quality & safety
1. We have established the quality guarantee system according to the requirements for boiler and pressure vessel manufacturing licensing of china and obtained the certificate issued by general administration of quality supervision, inspection and quarantine of the p.R.C (aqsiq), qualified to manufacture b1 and b3 grade pressure vessels.
2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (tuv, csei for example) before mass production, including bend test, drop test, hydrostatic test, etc. According to relevant standards.
3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.
4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.
Our website: alsafegascylinders point com
I'm shirly bai, you can write me to the following address: shirlybai at alsafegascylinders point com
Product name: beverage co2 gas cylinder
Manufacturer: liaoning alsafe technology co., ltd.
Specification: lw-203-20.0-15-h
Standard: iso7866 or dot 3al
Certificate: ce, ts
Third party inspectors: tuv, csei, sgs
Filling content: food grade co2
Color: aluminum
Outside surface treatment: transparent painting
Thread: 1.125-12unf
Valve: qf-35c
Form a, form e avaliable.
Features:
¡¡èmade by aluminum 6061;
¡¡è40% lighter than steel cylinders;
¡¡èno magnetism;
¡¡èhigh corrosion resist and special inner surface treatment, ensure beverage gas clean and smelless, ideal for food grade co2 storage;
¡¡èstable performance;
¡¡èwidely used in beer systems, carbonated beverage machines, etc.;
¡¡èchoice of worldwide top brands and enterprises.
We can also produce other specifications according to your requirement.
Quality & safety
1. We have established the quality guarantee system according to the requirements for boiler and pressure vessel manufacturing licensing of china and obtained the certificate issued by general administration of quality supervision, inspection and quarantine of the p.R.C (aqsiq), qualified to manufacture b1 and b3 grade pressure vessels.
2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (tuv, csei for example) before mass production, including bend test, drop test, hydrostatic test, etc. According to relevant standards.
3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.
4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.
Our website: alsafegascyinders point COM
I'm Shirly Bai.You can write me to the following address: shirlybai at alsafegascylinders point COM
Filling content: Medical oxygen
Color: green head or customed
Outside surface treatment: Transparent painting
Thread: 3/4-16UNF
Valve: CGA870, CGA870-1, CGA870-2
Form A, Form E avaliable.
Features:
¡¡èMade by aluminum 6061;
¡¡è40% lighter than steel cylinders;
¡¡èNo magnetism;
¡¡èHigh corrosion resist and special inner surface treatment, ensure medical oxygen clean and smelless, ideal for medical oxygen storage;
¡¡èStable performance;
¡¡èWidely used in hospitals, rescue stations, home oxygen therapy, etc.
¡¡èChoice of worldwide top brands and enterprises.
We can also produce other specifications according to your requirement.
Quality & Safety
1. We have established the quality guarantee system according to the Requirements for Boiler and Pressure Vessel Manufacturing Licensing of China and obtained the certificate issued by General Administration of Quality Supervision, Inspection and Quarantine of the P.R.C (AQSIQ), qualified to manufacture B1 and B3 grade pressure vessels.
2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (TUV, CSEI for example) before mass production, including bend test, drop test, hydrostatic test, etc. according to relevant standards.
3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.
4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.
plastic net, carton and pallet
1264 Industrial Cylinders Suppliers
Short on time? Let Industrial Cylinders sellers contact you.
Our website: alsafegascylinders point com
I'm shirly bai. You can write me to the following address: shirlybai at alsafegascylinders point com
Outside surface treatment: transparent painting
Thread: 3/4-16unf
Valve: cga870, cga870-1, cga870-2
Form a, form e avaliable.
Features:
èmade by aluminum 6061;
è40% lighter than steel cylinders;
èno magnetism;
èhigh corrosion resist and special inner surface treatment, ensure medical oxygen clean and smelless, ideal for medical oxygen storage;
èstable performance;
èwidely used in hospitals, rescue stations, home oxygen therapy, etc.
èchoice of worldwide top brands and enterprises.
We can also produce other specifications according to your requirement.
Quality & safety
1. We have established the quality guarantee system according to the requirements for boiler and pressure vessel manufacturing licensing of china and obtained the certificate issued by general administration of quality supervision, inspection and quarantine of the p.R.C (aqsiq), qualified to manufacture b1 and b3 grade pressure vessels.
2. Each new type of cylinders has to pass type tests held in qualified laboratories approved by third party inspector (tuv, csei for example) before mass production, including bend test, drop test, hydrostatic test, etc. According to relevant standards.
3. Every batch of cylinders (200 pieces as one batch normally) are manufactured and tested under supervision of local special equipment inspection and research institute and then issued batch test report.
4. Each finished cylinder has to pass leakage test before delivery to customers to ensure no leakage occurs.
Cng and industrial gas tube trailer are suitable for transporting big amount of cng or other industrial gas to places where gas pipe networks are not constructed .We are the only supplier who has firstly & successfully designed and manufactured ¡ó914mm large gas jumbo tube with more great advantage s than traditional ones
Material: steel
Use: cng cylinder
Pressure: high
Place of origin: shandong, china (mainland) brand name: cng cylinder cylinder
Color: red, blue, dark, etc.
Valve: according to customer's requirements
Material: steel
Use: industrial gas
Pressure: high
Place of origin: shandong, china (mainland)
Model number: wma219
Pressure: high
Certification: iso9809
Material: steel
Use: ipg gas cylinder
Pressure: high
Place of origin: shandong, china (mainland) brand name: disposable gas cylinder cylinder
Color: red, blue, dark, etc.
Valve: according to customer's requirements manufacture standard: iso9809/gb5099
Material: steel
Use: acetylene cylinder
Pressure: high
Place of origin: shandong, china (mainland) brand name: acetylene cylinder cylinder
Color: red, blue, dark, etc.
Valve: according to customer's requirements manufacture standard: iso9809/gb5099
Material: steel
Use: oxygen cylinder
Pressure: high
Place of origin: shandong, china (mainland)
Brand name: oxygen cylinder
Color: red, blue, dark, etc.
Valve: according to customer's requirements manufacture standard: iso9809/gb5099 use: oxygen
Qingdao haili gas industry co., ltd is located in huangdao district, qingdao city. We are one of the leading enterprises specialized in developing, engineering, manufacturing and exporting gas cylinder products and industrial gases in china.
Main products:
1. Gas products:high purity argonacetylene gaspropaneoxygenhigh purity nitrogenhigh purity heliumheliumco2 shielding gasmixture
2.All kind of high pressure gas cylinder and welded gas cylinders: gb 5099 gas cylinders, dot gas cylinders, iso 9809 gas cylinders, welded gas cylinders for liquid chlorine and liquid ammonia.
3.Liquid nitrogen containers: all kinds of liquid nitrogen containers from 2l to 50l
1. Small size, great lifting power
2. Multistages: 2 stages/3 stages/4stages/5 stages
3. Chromplated. Rustproof, hard.
4. It has a wide range of product series and can meet the demand of all customized small model vehicle cylinder series.
5. The strict control of cylinder dimensions can ensure the sincerity of two or multiple cylinders and lower the faulty risk of over-tipping caused by lifting deviation.
6. The repair rate is less than 0.3% for the past three years
. Safe: strict technical standard, safety test for every cylinder.
. Lightweight, resist-corrosion, perfect treatment for surface interior and exterior to ensure food grade co2 clean and smellest. It is
