Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction.
A&S Construction Machinery Co., Ltd. supplies all types of Hydraulic Couplers. All the brands of Hydraulic Couplers we can provide: CAT Hydraulic Couplers, KOMATSU Hydraulic Couplers, JOHN DEERE Hydraulic Couplers, SANY Hydraulic Couplers, XCMG Hydraulic Couplers, VOLVO Hydraulic Couplers, HITACHI Hydraulic Couplers, SUMITOMO Hydraulic Couplers, LIEBHERR Hydraulic Couplers, DOOSAN Hydraulic Couplers, CASE Hydraulic Couplers, BOBCAT Hydraulic Couplers, KUBOTA Hydraulic Couplers, YANMAR Hydraulic Couplers, HYUNDAI Hydraulic Couplers, DAEWOO Hydraulic Couplers, etc.. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc..
FLAT FACE HYDRAULIC QUICK COUPLINGS (CARBON STEEL)/INTERNATIONAL INTERCANGE ISO 16028 FLAT FACE HYDRAULIC QUICK COUPLINGS(CARBON STEEL)/ INTERNATIONAL INTERCHANGE ISO 16028 Connect by pushing the male coupling Disconnect by pulling back the female sleeve Shut off by flat face valve Connect under pressure not allowed Interchangeability according to ISO 16028 FLAT FACE HYDRAULIC QUICK COUPLINGS(CARBON STEEL)/ INTERNATIONAL INTERCHANGE ISO 16028 Connect by pushing the male coupling Disconnect by pulling back the female sleeve Shut off by flat face valve Connect under pressure not allowed Interchangeability according to ISO 16028 No spillage during connect and disconnect High grade carbon steel tempered or carbonitrited for specific stressed area Polyurethane and NBR backup ring in PTFE 100,000 cycles at 133% of rated pressure disconnected 100,000 cycles at 133% of rated pressure connect test according to ISO 16028 specification
Thread To Connect Under Pressure Couplings (Brass)/ACOPLES Hidraulicos Tuerca De Mariposa Connexion by screwing together the two parts Disconnection by unscrewing the two parts Shut off by flat valve Male and female connectable under pressure disconnection under pressure allowed interchangeability US market Interchangebility according to ISO 7241-2 Technical Specifications High grade carbonsteel with heat trearted wear parts Polyurethane and NBR Backup ring in PTFE -25C to +125C According to ISO 7241-2 Product Categories 1.ISO 7241A KZE ISO 7241 A SERIES HYDRAULIC QUICK COUPLINGS(Steel) KZEB ISO 7241A SERIES HYDRAULIC QUICK COUPLINGS(STEEL BALL) KZESS ISO 7241A SERIES HYDRAULIC QUICK COUPLIGNS(STAINLESS STEEL) 2.ISO 7241 B KZB ISO 7241 B SERIES HYDRAULIC QUICK COUPLINGS (STEEL) KZD ISO 7241 B SERIES HYDRAUIC QUICK COUPLINGS(BRASS) KZBSS ISO 7241 B Series Hydraulic Quick Couplings(stainless Steel) 3.4000SERIES ISO 5675 KPC DOUBLE SHUT-OFF COUPLINGS WITH HARDEND STEEL POPPETS(STEEL)/PIONEER4000SERIES INTERCHANGE 4.PUSH AND PULL TYPE KZA Push And Pull Type Hydraulic Quick Couplings(STEEL) KZAF PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) KZAV PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) 5.ISO 16028 QKPT FLAT Face Hydraulic Quick Couplings(Carbon Steel)/international Interchange ISO 16028 6.QKTF Thread To Connect Nder Pressure Couplings(BRASS)
G1/4-M16X2 Hydraulic Pressure Test Point Testing Coupling Adapter, Hose Fitting Adapter For Hydraulic System Hydraulic Pressure Test Adapter:This series of products are widely used in hydraulic system pressure detection, lubrication, extraction, oil sampling of the pressure system. Hydraulic Pressure Test Adapter: This series of products are widely used in hydraulic system pressure detection, lubrication, extraction, oil sampling of the pressure system. Durable:This test adapter is made of high quality carbon steel, sealed with a good sealant, with long service life.Advanced structure, reliable sealing, no oil leakage. Features: It can withstand high pressure, up to 63MPa, and great temperature resistance: -40 to 120 degree centigrade. Wide Application:This series of products are widely used in automobile, engineering machinery, food machinery, petrochemical industry, medical treatment, mining, ships and other industries. Convenience,Small size, light weight, easy to use.
KZB ISO 7241 B Series Hydraulic Quick Couplings (steel) Features Connexionby pullingback the sleeve Disconnexion by pulling back the female sleeve Shut off by poppet valve Connexion under pressure not allowed Disconnexion under pressure not allowed Interchangebility according to ISO 7241-1 part B Technical Specifications High grade carbonsteel with heat trearted wear parts Polyurethane and NBR Backup ring in PTFE -25�°C to +100�°C According to ISO 7241-2 Product Categories 1.ISO 7241A KZE ISO 7241 A SERIES HYDRAULIC QUICK COUPLINGS(STEEL) KZEB ISO 7241A SERIES HYDRAULIC QUICK COUPLINGS(STEEL BALL) KZESS ISO 7241A SERIES HYDRAULIC QUICK COUPLIGNS(STAINLESS STEEL) 2.ISO 7241 B KZB ISO 7241 B SERIES HYDRAULIC QUICK COUPLINGS (STEEL) KZD ISO 7241 B SERIES HYDRAUIC QUICK COUPLINGS(BRASS) KZBSS ISO 7241 B SERIES HYDRAULIC QUICK COUPLINGS(STANILESS STEEL) 3.4000SERIES ISO 5675 KPC DOUBLE SHUT-OFF COUPLINGS WITH HARDEND STEEL POPPETS(STEEL)/PIONEER4000SERIES INTERCHANGE 4.PUSH AND PULL TYPE KZA PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) KZAF PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) KZAV PUSH AND PULL TYPE HYDRAULIC QUICK COUPLINGS(STEEL) 5.ISO 16028 QKPT FLAT FACE HYDRAULIC QUICK COUPLINGS(CARBON STEEL)/INTERNATIONAL INTERCHANGE ISO 16028 6.QKTF THREAD TO CONNECT NDER PRESSURE COUPLINGS(BRASS)
ISO 7241 A Series Hydraulic Quick Couplings (acoples Rapidos) Features Connexionby pullingback the sleeve Disconnexion by pulling back the female sleeve Shut off by poppet valve Connexion under pressure not allowed Disconnexion under pressure not allowed Interchangebility according to ISO 7241-1 part A Technical Specifications High grade carbon steel with heat trearted wear parts Polyurethane and NBR Backup ring in PTFE -25C to +10C
UNIVERSAL COUPLINGS -U.S TYPE( HOSE END/MALE END/FEMALE END) Universal couplings-U.S TYPE Univesal hose couplings ,also known as Chicago and aire hose couplings ,have an identical claw-atyle head that allows you to connect to another Chiavago hose Couplings ,regardless of the pipe size or barbed hose ID. Universal couplings-U.S TYPE Univesal hose couplings ,also known as Chicago and aire hose couplings ,have an identical claw-atyle head that allows you to connect to another Chiacago hose Couplings ,regardless of the pipe size or barbed hose ID. The universal hose couplings can be made of carbon steel ,brass and stainless steel materials.Carbon steel couplings are stronger and more durable than the other metal couplings .The Carbon steel couplings are used in noncorrosive environments. Specifications Material: carbon steel zn pleated (the most popular), stainless steel and brass Size: 1/4 to 1 for 2-lug structure and 1-1/4 to 2 for 4-lug structure Seal: NBR Thread: NPT Part: male end, female end, hose end and 3-way Working pressure: 10 bar, max. Test pressure: 16 barHose end is one of Chiacago universal air hose coupligns, which is available for carbon steel, brass and stainless steel. The carbon steel hose ends are the most popular because of the economical and durable life. Hose ends is available in 1/4 to 2 with matched 2-lug or 4 lugs. Male end is one of Chicago universal air hose couplings, which is available for carbon steel, brass and stainless steel. The carbon steel male ends are the most popular because of the economical and durable life. Male end is available in 1/4â?³ to 2â?³ with matched 2-lug or 4 lug. Female end is one of Chicago universal air hose couplings, which is available for carbon steel, brass and stainless steel. The carbon steel female ends are the most popular because of the economical and durable life. Female end is available in 1/4â?³ to 2â?³ with matched 2-lug or 4 lugs 3-Way is one of Chicago universal air hose couplings, which is available for carbon steel, brass and stainless steel. The carbon steel hose ends are the most popular because of the economical and durable life.
Camlock Coupling Aluminum TYPE A , B, C, D, E, F, DC, DP (NPT/BSPT) DIN 2828 Camlock coupling aluminum factory told Aluminum cam lock fittings allow for quick and secure hose connections. The camlock couplings mate by inserting the grooved coupling into the cam coupling and simply closing the cam or lever arms. Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828 Casting Method: Die Casting or Gravity Casting Size : 1/2-8 Body Material: Aluminum Cam Arm Material: 1-Aluminum Alloy 2-Stainless Steel 3-Brass Assembly: Body + Gaskets + Handles + Pins + Pull Rings + Safety Clips Gasket Material: NBR:(Temp Range C -30 C~+100 C) EPDM:(Temp Range C -50 C~+150C) VITON:(Temp Range C -20 C~+200C) PTFE envelop gasker:(Temp Range C -190C~+260C) Silicone :( Temp Range C -60 C~+200C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B: CNC precisely machined C: Easy to connect and disconnect D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect. A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles) Type â??Aâ??, has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size. Type â??Bâ??, has a female camlock end and a male pipe thread of the same size. Type â??Câ??, has a female camlock on one end and a male hose tail on the other. Type â??Dâ??, has a female camlock end and a female pipe thread of the same size. Type â??Eâ??, has a male camlock on one end and a male hose tail on the other. Type â??Fâ??, has a male grooved adaptor and a male pipe thread of the same size.
Brass Camlock Coupling Type B Female Camlock End And A Male Pipe Thread(NPT & BSPT) CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828 Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass CAM-LOCK COUPLING BRASS Type B Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass Gasket Material: NBR:(Temp Range C -30 C~+100 C) EPDM:(Temp Range C -50 C~+150 C) VITON:(Temp Range C -20 C~+200 C) PTFE envelop gasker:(Temp Range C -190 C~+260 C) Silicone :(Temp Range C -60 C~+200 C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B:CNC precisely machined
Brass Camlock Coupling Type C Female Camlock On One End And A Male Hose Tail CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass Gasket Material: NBR:(Temp Range C -30 C~+100 C) EPDM:(Temp Range C -50 C~+150 C) VITON:(Temp Range C -20 C~+200 C) PTFE envelop gasker:(Temp Range C -190 C~+260 C) Silicone :(Temp Range C -60 C~+200 C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B:CNC precisely machined C: Easy to connect and disconnect D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles) Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size. Type "B", has a female camlock end and a male pipe thread of the same size. Type "C", has a female camlock on one end and a male hose tail on the other. Type "D", has a female camlock end and a female pipe thread of the same size. Type "E", has a male camlock on one end and a male hose tail on the other. Type "F", has a male grooved adaptor and a male pipe thread of the same size.
CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass CAM-LOCK COUPLING BRASS TYPE DC Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass Gasket Material: NBR:(Temp Range C -30 C~+100 C) EPDM:(Temp Range C -50 C~+150 C) VITON:(Temp Range C -20 C~+200 C) PTFE envelop gasker:(Temp Range C -190 C~+260 C) Silicone :(Temp Range C -60 C~+200 C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B:CNC precisely machined C: Easy to connect and disconnect D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles) Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size. Type "B", has a female camlock end and a male pipe thread of the same size. Type "C", has a female camlock on one end and a male hose tail on the other. Type "D", has a female camlock end and a female pipe thread of the same size. Type "E", has a male camlock on one end and a male hose tail on the other. Type "F", has a male grooved adaptor and a male pipe thread of the same size.
Brass Camlock Coupling Type F Male Grooved Adaptor And A Male Pipe Thread (NPT/BSPT) CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass CAM-LOCK COUPLING BRASS TYPE E Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass Gasket Material: NBR:(Temp Range C -30 C~+100 C) EPDM:(Temp Range C -50 C~+150 C) VITON:(Temp Range C -20 C~+200 C) PTFE envelop gasker:(Temp Range C -190 C~+260 C) Silicone :(Temp Range C -60 C~+200 C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B:CNC precisely machined C: Easy to connect and disconnect D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect CAMLOCK COUPLING BRASS -ALL A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles) Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size. Type "B", has a female camlock end and a male pipe thread of the same size. Type "C", has a female camlock on one end and a male hose tail on the other. Type "D", has a female camlock end and a female pipe thread of the same size. Type "E", has a male camlock on one end and a male hose tail on the other. Type "F", has a male grooved adaptor and a male pipe thread of the same size.
Brass Camlock Coupling Type E Male Camlock On One End And A Male Hose Tail CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass CAM-LOCK COUPLING BRASS TYPE E Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass Gasket Material: NBR:(Temp Range C -30 C~+100 C) EPDM:(Temp Range C -50 C~+150 C) VITON:(Temp Range C -20 C~+200 C) PTFE envelop gasker:(Temp Range C -190 C~+260 C) Silicone :(Temp Range C -60 C~+200 C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B:CNC precisely machined C: Easy to connect and disconnect D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles) Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size. Type "B", has a female camlock end and a male pipe thread of the same size. Type "C", has a female camlock on one end and a male hose tail on the other. Type "D", has a female camlock end and a female pipe thread of the same size. Type "E", has a male camlock on one end and a male hose tail on the other. Type "F", has a male grooved adaptor and a male pipe thread of the same size.
Brass Camlock Coupling Type D Female Camlock End And A Female Pipe Thread CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass CAM-LOCK COUPLING BRASS TYPE D Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass Gasket Material: NBR:(Temp Range C -30 C~+100 C) EPDM:(Temp Range C -50 C~+150 C) VITON:(Temp Range C -20 C~+200 C) PTFE envelop gasker:(Temp Range C -190 C~+260 C) Silicone :(Temp Range C -60 C~+200 C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B:CNC precisely machined C: Easy to connect and disconnect D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles) Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size. Type "B", has a female camlock end and a male pipe thread of the same size. Type "C", has a female camlock on one end and a male hose tail on the other. Type "D", has a female camlock end and a female pipe thread of the same size. Type "E", has a male camlock on one end and a male hose tail on the other. Type "F", has a male grooved adaptor and a male pipe thread of the same size.
Brass Camlock Coupling Type A Male Grooved Adapter And A Female Pipe Thread (bsp Or Npt Thread) CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass CAM-LOCK COUPLING BRASS Type A Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass Gasket Material: NBR:(Temp Range C -30 C~+100 C) EPDM:(Temp Range C -50 C~+150 C) VITON:(Temp Range C -20 C~+200 C) PTFE envelop gasker:(Temp Range C -190 C~+260 C) Silicone :(Temp Range C -60 C~+200 C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B:CNC precisely machined C: Easy to connect and disconnect D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles) Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size. Type "B", has a female camlock end and a male pipe thread of the same size. Type "C", has a female camlock on one end and a male hose tail on the other. Type "D", has a female camlock end and a female pipe thread of the same size. Type "E", has a male camlock on one end and a male hose tail on the other. Type "F", has a male grooved adaptor and a male pipe thread of the same size.
HIGH QUALITY BRASS QUICK CAM-LOCK COUPLINGS TYPE A B C D E F DC DP DIN 2828 Brass camlock coupling B type Standard: A-A-59326 (superseding MIL-C-27487) or DIN 2828,EN14420-7 Material: Brass Sizes: From 1/2 to 6 Types: A, B, C, D, E, F, DC, DP Cam levers: Brass handles Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass Gasket Material: NBR:(Temp RangeC -30C~+100C) EPDM:(Temp RangeC -50C~+150C) VITON:(Temp RangeC -20C~+200C) PTFE envelop gasker:(Temp RangeC -190C~+260C) Silicone :(Temp RangeC -60C~+200C) Other materials are available on request. Thread; NPT BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT) Competitive Advantages of the product A: Precision investment coupling B:CNC precisely machined C: Easy to connect and disconnect D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect CAMLOCK COUPLING BRASS -ALL A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles) Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size. Type "B", has a female camlock end and a male pipe thread of the same size. Type "C", has a female camlock on one end and a male hose tail on the other. Type "D", has a female camlock end and a female pipe thread of the same size. Type "E", has a male camlock on one end and a male hose tail on the other. Type "F", has a male grooved adaptor and a male pipe thread of the same size.
Type A Male polypropylene cam and groove adaptor with female BSP thread of the same size. Normally used with Type D couplers (female thread) but can be used with Type B (male thread) and Type C (hose shank) couplers and Type DC (dust cap) of identical size. Type B Female polypropylene cam and groove coupler with male BSP thread of the same size. Normally used with Type F adapters (male thread) but can be used with Type A (female thread) and Type E (hose shank) adapters and Type DP (dust plug) of identical size Type C Female polypropylene cam and groove coupler with a male hose shank. Normally used with Type E adapters (hose shank) but can be used with Type A (female thread) and Type F (male thread) adapters and Type DP (dust plug) of identical size. Type D Female polypropylene cam and groove coupler with a female BSP thread of the same size. Normally used with Type A adapters (female thread) but can be used with Type F (male thread) and Type E (hose shank) adapters and Type DP (dust plug) of identical size. Type E Male polypropylene cam and groove adapter with male hose shank. Normally used with Type C couplers (hose shank) but can be used with Type B (male thread) and Type D (female thread) couplers and Type DC (dust cover) of identical size. Type F Male polypropylene cam and groove adaptor and a male BSP thread of the same size. Normally used with Type B couplers (male thread) but can also be used with Type D (female thread) and Type C (hose shank) couplers and DC (dust cover) of identical size. Type DC Dust Cap. Polypropylene cam and groove coupling used to cover the end of an adapter. The cap prevents dust, dirt, insects and small rodents from entering the system. DCs can be used with Type A, Type E and Type F adapters. Type DP Dust Plug. Polypropylene cam and groove adapter used to seal the end of a coupler. The plug prevents dust, dirt, insects and small rodents from entering the system. DPs can be used with Type B, Type C and Type D couplers.
Ground Joint Hose Couplings are designed for compressed air, steam Ground Joint Hose Couplings are designed for compressed air, steam, or fluid hose service where higher working pressure and increased coupling retention are required. A hammer type female swivel nut with coarse thread allows for quick attachment and release. A spud adapter converts this coupling to pipe thread. The ground joint hose coupling set is a three piece system featuring a hose shank, over-sized female swivel nut, and spud adapter. Ground Joint Couplings are available in a larger size range than many other hose coupling styles. The female swivel features a special coarse thread and over-sized hammer lugs that quickly seal the coupling tight against its special polymer seal (similar to a hammer union). Threaded spud adapters in male NPT, female NPT or double male wing nut thread allow for versatility in configuring hose systems from tool to compressor, manifold, and piping systems. While a gasket seal version is also available, most parts do not interchange. All parts on this site feature the built-in ground joint seal. bolted interlocking clamps secure the ground joint hose coupling shank to heavy wire braid bull air hose, wire braid steam hose, or fluid transfer hose. Using band type hose clamps will reduce the working pressure of the hose assembly and decrease shank retention. Ground Joint Coupling Wing Nut (Ground joint fittings are designed for high pressure air or water (ie. Up to 500 psi) as well as steam (steam maximum 250 psi @ 450�°F max) in plants, refineries, construction sites, or drilling applications.) Ground Joint Coupling Female SPUd (Ground Joint female spud is included in the female hose coupling set. Purchase additional female spuds to convert additional equipment, pipe, and manifolds to ground joint wing nut thread.) Ground Joint Coupling Hose Stem (Ground Joint Coupling-Hose Stem are to be installed by a fully trained assembler and are designed to be used with interlocking bolt clamps.) Ground Joint Coupling Male SPUd Ground Joint Coupling Double SPUd Ground Joint Coupling Male Stem
Rebar Cold Extrusion Technology The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.� Only 1 â?? 3 kw power of oil pump, which is not limited by power capacity, has flexible structure and suitable for operation on several machines. Advantages: No professional and experienced worker needed, able to connect changed steel bar of different diameters. Save 80% of connector steel consumption. Only needs 1 3m to stamp each connector, which is about ten times faster than ordinary welding. No flammable gases, not affected by rainy or cold weather. Relieve congestion of the connecting point, facilitated concrete pouring.
