20kg/drum. or 25kg/bag,
LZZG deep cone thickener promoted the structure of internal feed tube on the basis of traditional vertical flow sedimentation tank,optimized flocculation and deep solids compression provide paste consistency underflow and higher process rates, which greatly increase settling efficiency. The deep cone thickener is circular, suspended solids settle down into bottom conical sludge tank by gravity, clear water flow away from overflow port around the upper tank, which is also calledpaste thickener. The port of the overflow is equipped with filter and baffle, which improve the water quality that poured out. Working principle LZZG thickener is a thickener tank that based on gravity and sedimentation which makes solid separate from liquid well. The concentration of pulp waste water could be enhanced from 2% ~ 15%to 60%~ 70% by the paste thickener, the clear water is overflow from the upper part of the paste thickener , so as to achieve the purpose of sewage purification, solid-liquid separation and maximum water recovery. Features & Benefits 1. LZZG thickener automatic cleaning, automatic discharge slurry, solve manual operation; 2. Following the principle of suspension filtration, media adsorption and settling, maximum purification; 3. LZZG paste thickener use qualified carbon steel (or stainless steel), the machine has good strength and corrosion resistance; 4. Low flocculant using cost, big capacity, high efficiency, stable performance; 5. Small volume, small floor space, easy installation; 6. Service life is about 15 years, low investment but remarkable economic benefit; 7. The purified water by the paste thickener can totally reach to national standard of discharge and can be recycled; 8. LZZG can customize thickeners to suit the individual requirements.
CARBOMER is an acrylic polymer containing polyenyl polyether crosslinked. It is a white loose powder with strong hygroscopicity. Due to the carboxyl group in its molecular structure, it has a certain acidity, which can be neutralized by alkaline substances to form transparent gel. After the carboxyl group was neutralized and ionized, the molecular chain was dispersed and extended due to the mutual repulsion of negative charges. The thickening effect of capo resin can be produced in very low dosages. Kapoor resin enables liquid systems to have special yield values and rheological properties. Some insoluble additives (particles, oil droplets, etc.) can be suspended at very low concentrations. Because of its suspension ability, kapoor resin is widely used to stabilize traditional oil/water emulsions and creams, oil droplets in suspension solutions and water insoluble substances. The viscosity of Carbomer gel is positively correlated with the concentration, and the higher the concentration, the higher the viscosity of the gel. Carbomer gel is sensitive to electrolyte ions, and the viscosity of carbomer gel decreases sharply with the presence of electrolyte ions, and the effect of divalent ions is greater than that of monovalent ions. The decrease in viscosity of carbomer gel caused by ion is mainly because it reduces the mutual repulsion of the same charge on the main chain of the polymerization, thus reducing the actual effective concentration of carbomer in the system. performance It has the effect of thickening, suspension and stability With short flow (3) With high transparency The viscosity of capo resin is not affected by temperature Local administration system, crystal clarifying gel, water or alcohol solvent Application field Skin lotion and cream (2) Transparent gel products containing ethanol Transparent skin care gel, hair styling gel Shampoo and shower gel Rub mud treasure to remove cutin Suggested usage 0.2% ~ 1.0% Matters needing attention (1) After capo neutralization, persistent stirring or high shear stirring will cause viscosity loss The presence of electrolyte can reduce the thickening efficiency of capo resin Long-term ultraviolet radiation will reduce the viscosity of capo resin Packing and storage Packing: 20kg/ case Storage: keep in ventilated and cool place
citric acid is as a flavoring and preservative in food and beverages, especially soft drinks
Hydroxypropyl methyl cellulose Hs code:3912, 900 Cas:9004-65-3 Hydroxypropyl methyl cellulose is a kind of white or slightly yellowish powder, odorless, tasteless, and non-toxic. The product can be dissolved in cold water to form a transparent viscous solution. The aqueous solution of this product has surface activity so that it has emulsification, protective colloids and relative stability. Ph stability: the aqueous solution viscosity of this product is relatively stable in the range of ph 3.0â??11.0. As the product is non-ionic, and in the preparation process can be effectively purified by washing with hot water, it has a very low ash content. Hydroxypropyl methylcellulose products can fully meet the standards for use of medicine, food, construction and personal care products. Specifications Specification 60 (e) 65 (f) 75 (k) Gelling temperature (â??) 58-64 62-68 70-90 Methoxy (wt%) 28.0-30.0 27.0-30.0 19.0-24.0 Hydroxypropoxy (wt%) 7.5-12.0 4.0-7.5 4.0-12.0 Viscosity(cps) 3; 5; 6; 15; 50; 400; 4000; 10000; 20000; 30000; 40000; 50000; 100, 000 150, 000;200, 000 Physical and chemical properties *particle size:98.5% passes through 100 mesh; 100% passes through 80 mesh. *charring temperature: 280-300â??. *bulk density: 0.25-0.70 g/cm3 (usually around 0.5 g/cm3 ) *real specific gravity:1.26-1.31. *browning temperature: 190-200â??. Surface tension:(2% water solution) 42-56dyn.Cm. *properties: dissolved in water and some organic solvent such as ethanol. Propyl alcohol. Ethylene chloride, the water solution is of surface activity. It is a nonionic surface active agent. Gelation temperature is different for different grades. For example, among 60rt hydroxypropyl methylcellulose, 60 is gelation temperature, namely, 2% water solution will form gelation at 60%.
Calcium Aluminates are available in two varients Cement grade Refractory grade Features Pre-melted & Fused Specification â?? Need-based & Tailor-made How this product can help Cement / Refractory makers ?? It Enhances biding strength Serve as Ready-Made ingredient for faster production â?? Reduction in Cost Addition Points Tapping of BOF/EAF/IF Ladle Furnace (LRF)
Hydroxypropyl methyl cellulose (HPMC) is made from refined cotton after being pulverized, and then alkalized with sodium hydroxide (liquid caustic soda) solution, and then monochloromethane + propylene oxide is added for etherification to form crude HPMC , After neutralization (pH adjustment), filter press, drying, crushing and sieving, a pure HPMC product of certain fineness is obtained. The finished product has a slight smell, the smell of methane. mainly used in bonding mortars, with excellent water retention, high thickening, anti-sagging, increasing open time, improving bonding strength, reducing deformation rate, preventing cracking, etc. Performance, the production cost can be reduced by adjusting the low dosage
Methylene Chloride
Methyl Phenyl Acetate
Diethyl Phthalate
Sodium Lauryl Ether Sulfate
Sodium Benzoate
Silicon Carbide
Oxalic Acid
EVA ( Ethylene Vinyl Acetate )
Product : Sargassum Polycystum Usage : Feeding Farm, Fertilizer, Cosmetic, Pharmacy, Textile & Papper Origin : Kepulauan Riau, Indonesia Quality Specification : Dried By Wind, Brown Colour, Well Mature Seaweed, Cleaning With Seawater Water Content : 15-20% Supply Ability : 100mt Per Month
LZZG deep cone thickener promoted the structure of internal feed tube on the basis of traditional vertical flow sedimentation tank,optimized flocculation and deep solids compression provide paste consistency underflow and higher process rates, which greatly increase settling efficiency. The deep cone thickener is circular, suspended solids settle down into bottom conical sludge tank by gravity, clear water flow away from overflow port around the upper tank, which is also called paste thickener. The port of the overflow is equipped with filter and baffle, which improve the water quality that poured out. Features & Benefits 1.LZZG thickener automatic cleaning, automatic discharge slurry, solve manual operation; 2. Following the principle of suspension filtration, media adsorption and settling, maximum purification; 3. LZZG paste thickener use qualified carbon steel (or stainless steel), the machine has good strength and corrosion resistance; 4. Low flocculant using cost, big capacity, high efficiency, stable performance; 5. Small volume, small floor space, easy installation; 6. Service life is about 15 years, low investment but remarkable economic benefit; 7. The purified water by the paste thickener can totally reach to national standard of discharge and can be recycled; 8.LZZG can customize thickeners to suit the individual requirements.
Melting point: 204-208 C (lit.) Boiling point: 274.7 + / - 20.0 C (Predicted) Density: 1.4016 (estimate) Storage conditions: SeChemicalbookaledindry RoomTemperature Acidity coefficient (pKa) : 3.04 ±0.10(Predicted) Water solubility: insoluble
Zinc is the forming element of many enzymes and hormone, and participates in metabolism of protein, carbohydrate as well as lipid. When lack of zinc ,animals exhibit inappetence, slow growth, thick and disorderly clothing hair, depilation, dry and chappy skin and unease-cure wound.Adding high dosage zinc in initial feed for sucking can reduce diarrhea and increase weight.
Fe is the forming element of many enzymes and hormone, and participates in metabolism of protein, carbohydrate as well as lipid. When lack of Fe, animals exhibit inappetence, slow growth, thick and disorderly clothing hair, depilation, dry and chappy skin and unease-cure wound. Adding high dosage Fe in initial feed for sucking can reduce diarrhea and increase weight.
