Eusolex 9020 Sunscreen Avobenzone Cas 70356-09-1 Product Name Avobenzone CAS 70356-09-1 Purity 99% Appearance white powder MOQ 10g Melting point 81-84 C Boiling point 463.6±35.0 C(Predicted) Density 1.079 Flash point / Refractive index Usage organic synthesis intermediates Storage conditions Inert atmosphere,Room Temperature
Benzophenone is a colorless prismatic crystal with sweet taste and rose fragrance. It has a melting point of 47-49C, a relative density of 1.1146, and a refractive index of 1.6077. It is soluble in organic solvents and monomers such as ethanol, ether and chlor form, but insoluble in water. It is a free radical photoinitiator, mainly used in free radical UV curing systems, such as coatings, inks, adhesives, etc. It is also an intermediate for organic pigments and fragrances. This product is also a styrene polymerization inhibitor and a fragrance fixer, which can impart a sweet smell to the fragrance, and is widely used in perfume and soap flavors. During storage and transportation, the product should be protected from moisture, sun, and away from heat sources, and its temperature should not exceed 45C.
Citric Acid Citric Acid (CA for short, also known as citric acid) is an important organic acid, colorless crystal appearance, odorless, easily soluble in water. According to its different water content, it is divided into monohydrate citric acid and anhydrous citric acid. The calcium salt of citric acid is easily dissolved in cold water than in hot water, this property is commonly used to identify and separate citric acid, and anhydrous citric acid can be obtained by controlling the appropriate temperature when crystallizing, which has many uses in industry, food industry, cosmetic industry, etc.
Antimony trioxide Sb2O3 CAS 1309-64-4 Antimony trioxide mostly used as synesis which with halogen flame retardant in most of polymer materials compounding. It is also can be used as clarifier additive inside glass making. And used for ceramic glaze and pigment & coating. Main application: The product is mainly applied to the industries of plastics, rubber, chemical fiber, paint, enamel, pigments, glass and electronics. Physical and chemical indicators and its characters: the main content is between 98.00-99.90 percent and it also can be produced according to the requirements of customers. And the average particle size can be determined according to the requirements of customers.1. Used as a fire retardant in the membranes of plastic industry, the enclosures of electric devices and household electric
Raw materials for special dyes and functional dyes, such as raw materials for the synthesis of hair dyes and liquid crystal dyes.
DOTP has good electrical and thermal resistance. It can replace DOP in PVC plastic electric wire sheath, and can also be used in the production of artificial leather film. In addition, it has excellent compatibility and can also be used for plasticization of acry lonitril derivatives, polyvinyl butyral, nitrile rubber, nitr cellulose, and the like.And it plays a role in improving the hardness and deformability of the product, and can be used as a softener in products such as nitrile rubber, neoprene rubber, EPDM rubber and the like. It is especially used in cable materials with good plasticizing effect and low volatility. It is widely used in various products requiring heat resistance and high insulation. It is an ideal plasticizing for producing temperature-resistant 70C cable materials and other volatile PVC products Agent.
Propyle ne glycol 1.Stable quality 2. Leading ISO Manufacturer and Supplier 3.Purity Min 99.5% 4. Colorless, odorless viscous liquid
What is Oligopeptide-10?Oligopeptide-10 has broad-spectrum activity against many types of organisms, including p. acne bacteria. Oligopeptide-10 is A short bioactive peptide consisting of fifteen naturally occurring amino acids that provides anti-microbial activity against p-acne bacterium. Oligopeptide-10 has potent activity against Propionibacterium acnes causing rapid cell death. It binds to negatively charged surface elements (lipoteichoic acids) of bacteria enabling access to its primary target, the cytoplasmic membrane which causes a lethal osmotic imbalance within the bacteria. Due to this unique mechanical mechanism of action bacteria have a very low probability of becoming resistant and bacteria resistant to other antibiotics remain susceptible to Oligopeptide-10. In addition, it neutralizes pro-inflammatory bacterial components, reducing redness. In independent studies Oligopeptide-10 has been shown to be non-cytotoxic, non-mutagenic, non-irritating and non-sensitizing.Used in many acne products to enhance natural defense systems, Oligopeptide-10 is an anti-microbial peptide derived from plant amino acids that is highly synergistic with salicylic acid. Studies have demonstrated that Oligopeptide-10 has broad-spectrum activity against many types of organisms, including p. acnes bacteria. Clinical studies have shown a significant reduction in the appearance of blemishes and red, blotchy spots after using products with Oligopeptide-10.
SYN-AKE acts as an effective anti-wrinkle active product mainly by relaxing facial muscles. SYN-AKE acts on the postsynaptic membrane and is a reversible antagonist of muscle nicotinic acetylcholine receptors. SYN-AKE binds to subunits of nicotinic acetylcholine receptors, thereby blocking the binding of acetylcholine to the receptor, resulting in persistent receptor blockade. In the closed state, sodium ions cannot be ingested, cannot be depolarized, and nerve excitation transmission is blocked, so the muscles at the wrinkles are relaxed, thereby reducing wrinkles, and at the same time increasing the moisture and nutrition of the skin to protect the skin in an all-round way.
CAS 81646-13-1 BTMS 50 is white flakes, soluble in water and ethanol, has good compatibility with cationic and non-ionic surfactants, and is stable below 100 C.Good chemical stability, heat resistance, light resistance, pressure resistance, strong acid and alkali  resistance. It hasexcellent thickening, emulsifying and softening properties. This product is used in hair care and shampoo products: conditioners, ointments, shampoos and other hair products softeners.
Raw Material: Dichloromethane (Methylene Chloride) Dichloromethane, also known as DCM, methylene chloride, or methylene bichloride, is an organic compound commonly used as a solvent in various industrial applications. Chemical Properties: Chemical Formula: CHCl CAS Number: 75-09-2 Appearance: Colorless, transparent liquid Odor: Irritating ether-like odor with a sweet, chloroform-like scent Solubility: Dichloromethane is slightly soluble in water and fully soluble in ethanol and ether. It exhibits low polarity and is miscible with many organic solvents, making it versatile for various applications. Physical Properties: Under normal usage conditions, dichloromethane is a non-flammable, low-boiling solvent. It serves as an effective replacement for flammable solvents such as petroleum ether and ether, particularly in environments where safety is a concern. However, caution is advised when vapor concentrations become elevated, especially in high-temperature air.
HFC-245fa, or 1,1,1,3,3-pentafluoropropane, is a third-generation alternative blowing agent designed to replace chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) in various applications. It is primarily utilized as a blowing agent for rigid polyurethane (PU) foam, which is extensively used in refrigerators, cold storage, and building boards. Additionally, HFC-245fa serves as a refrigerant, effectively replacing R-123 and R-22 refrigerants in central air conditioning systems (chillers). Quality Index: Purity: 99.8% Moisture (% w/w): 0.0020 Acidity (as HCl, ppm w/w): 0.0001 Evaporation Residue: 0.01 Color: Colorless liquid HFC-245fa's high purity and low moisture content make it suitable for a wide range of industrial applications, ensuring optimal performance and reliability.
It is used in the food industry for its desired physical properties such as viscosity, boiling point, melting point, freezing point, viscosity and sweetness. It is used in various food products such as baked goods, candies, ice creams, dairy products, cereal products and alcoholic beverages.
Pine oil is a mixture of terpene alcohols and terpene hydrocarbons. Thanks to its pleasant pine smell, notable antimicrobial power and excellent solvency, pine oil is mainly applied in the production of household detergent, flooring gel, industrial cleaner, high quality ink and paint solvent, low concentration ones can be used as foaming agent in ore flotation.
Introduction:� Benzoic acid, C12-15-alkyl esters can be widely used in various creams, sunscreens and lotions. It can be used in conditioners and conditioning shampoos. It can synergize with active agents to enhance conditioning. Dry hair can be oily but not greasy, making the hair greasy. . Application: Be used as pharmaceutic aid (vehicle, oleaginous); pharmaceutic aid (emollient) . � This product is very easy to emulsify, can be widely used in various creams, sunscreens and lotions, and can also be used in hair conditioner conditioning shampoos. It can synergize with cationic active agents and enhance conditioning. It can make dry Sexual hair is oily without making it greasy.
Isopropyl palmitate is an fatty acid ester. Isopropyl palmitate can be used for design and characterization of bioactive bilayer films. The bilayer membrane not only has the ability to scavenge free radicals and inhibit lipid peroxidation, but also can inhibit the growth of known foodborne pathogens. Isopropyl palmitate can be used as an excipient, such as lubricant, oily carrier, solvent, controlled-release transdermal film. Pharmaceutical excipients, or pharmaceutical auxiliaries, refer to other chemical substances used in the pharmaceutical process other than pharmaceutical ingredients. Pharmaceutical excipients generally refer to inactive ingredients in pharmaceutical preparations, which can improve the stability, solubility and processability of pharmaceutical preparations. Pharmaceutical excipients also affect the absorption, distribution, metabolism, and elimination (ADME) processes of co-administered drugs
Calcium hydroxide is white powder. Chemical formula Ca (OH) 2, commonly known as slaked lime, slaked lime, water solution known as clarifying water. Is a white powder solid, slightly soluble in water. Alkali calcium hydroxide has continuity, is a strong basein. Calcium hydroxide is two yuan alkali, but slightly soluble in water. Calcium hydroxide is widely used in industry.
Anhydrous Sodium Sulfate 15124-09-1
Sucrose benzoate is a white to off-white powder. Sucrose benzoate can be used as a plasticizer for solid inks, solid coatings, thermosetting powder coatings and thermal printing toners. Application: It is used as a synthetic chemical raw material, a coating and cosmetic raw material, and as a high-performance rate-modifying additive for high-performance liquid crystal display film optical materials, holographic photosensitive materials, electronic image recording elements, and thermal transfer printing, Magnetic thermal transfer ribbon, electrostatically sprayed toner and thermal printing ink, etc. Different application occasions have corresponding requirements on the average substitution degree of sucrose benzoate and the content of each component in order to achieve a better use effect.
Squalene is a natural 30-carbon organic compound, although plant sources are now used as well, including amaranth seed, rice bran, wheat germ, and olives. Squalene is light yellow to brownish red clear oily liquid,derived from the vegetable oil fatty acid.It is an important biological active substance which can be widely used in cosemetics,foods and other fields.
