ZIP is used in shampoo to reduce dandruff, which can inhibit the growth of gram-positive and negative bacteria and mold. It can effectively care for the hair, delay the aging of the hair, and control the production of white hair and hair loss. Pyrithione zinc ZPT has a strong killing effect on fungi and bacteria and can effectively kill the fungi that produce dandruff and play a role in anti-dandruff.
Sodium bromide can be used as raw material in the preparation of liquid photographic film; medically as sedative, the brominating agent in printing and dyeing; it can also be used in synthetic fragrances and other chemicals. In addition, it can also be used for organic synthesis and so on.
Polyvinyl alcohol is an excellent water-based adhesive. The general product is flake, granular or flocculent. It is not easilyÃ???Ã?? soluble in cold water. Heating is generally required during dissolution. After being finely pulverized and surface treated, it hasÃ???Ã?? better cold water dissolving performance. But because of its thermoplasticity, pulverization becomes particularly difficult. OurÃ???Ã?? factory adopts a special liquid nitrogen low temperature cooling process to ensure that the powder of the crushed material isÃ???Ã?? uniform. So that the material has excellent water solubility.
Redispersible emulsion powder, commonly known as dry powder adhesive.It has outstanding waterproof performance, good bonding strength, increases the elasticity of mortar and has a long opening time, endows mortar with excellent alkali resistance, improves the adhesion, adhesion, flexural strength, plasticity, wear-resisting performance and construction property of mortar, and has stronger flexibility in flexible crack resistant mortar.
Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�??�?�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�??�?�°C, reduced to CoO at 200�??�?�°C, and reduced to cobalt metal at 250�??�?�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.
32563 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
Characteristic.
Cobalt powder is gray and irregular, soluble in acid, magnetic, easy to oxidize in wet air. It is widely used in aviation,
aerospace, electrical, mechanical manufacturing, chemical and ceramic industries. Cobalt based alloys or cobalt containing alloy steels are used as high temperature heat-resistant parts and important metal materials in atomic energy industry as blades, impeller, conduit, jet engine, rocket engine, missile component and chemical equipment of turbine.
As a binder in powder metallurgy, cobalt can ensure the toughness of the hard alloy. Magnetic alloys are indispensable materials in modern electronics and mechanical and electrical industries, which are used to make various components of sound, light, electricity and magnetic materials. Cobalt is also an important part of permanent magnetic alloys. In chemical industry, cobalt isused in high alloy and anticorrosive alloy, and also used in colored glass, pigment, enamel, catalyst and desiccant.
Application
-Water atomized cobalt powder has a relatively coarse grain size, which can be used in welding materials to improve its toughness, impact resistance and wear resistance.
-Reduced cobalt powder is in fine size and high purity, can be widely used in diamond tools, powder metallurgy,
Reddish metal (face-centered cubic); very ductile. It is a good conductor of heat and electricity (next to silver).
Widely used in powder metallurgy, electrical carbon products, diamond tool products, electronic materials, conductive materials, chemical catalysts, pharmaceutical chemicals, filters, radiating tubes and other mechanical and electrical parts and electronic aviation field.
Product name
Copper powder
CAS No
7440-50-8
Size
8~12um
Sublimation
500 degree
Shape
Powder
MW
63.55
Specific gravity
3.597 g/mL at 25 C
Applications
1. Used as a raw material for smelting and electrolyzing copper;
2. Used in powder metallurgy parts, diamond saw blades, friction materials, electrical carbon products and chemical catalyst;
3. It is mainly used to make conductive devices and alloys (bronze, brass, white copper, etc.);
4. Mainly used as raw material for copper smelting industry.
The main function of polyglutamic acid in cosmetics and skin care products is moisturizing agent and skin conditioner. The risk factor is 1, which is relatively safe and can be used at ease. Generally, it has no effect on pregnant women, and polyglutamic acid is not acne-causing. Polyglutamic acid can promote the activity of fiber bud cells and has revitalizing effect. It can be used for anti-aging and anti-wrinkle cosmetics. Larger molecular weight of polyglutamic acid on fiber bud cell activity promotion is not as small molecular weight, but its stable foam, moisturizing ability, adsorption on the hair performance is better than small molecular weight products, used in the hair water, can be antistatic, hair soft 'polyglutamic acid has the effect of whitening skin.
SPT is mainly used for antisepsis and mould proofing in the fields of personal care product (shampoo and hair care products), building coating, adhesive, sealant, pesticide, textile, leatherware, metal processing liquid. It also can used to formulate antiseptics, washing chemical and broad-spectrum dermatological antifungal medicine. Moreover, it is an effective bactericide for fruit trees, peanuts, wheat and vegetables and antiseptics for silkworm use. Therefore, SPT and its like products are widely used in relative fields due to its properties of high efficiency, broad-spectrum and low toxicity.
Caprylhydroxamic acid could be used as a replacement for traditional preservative in cosmetics. It still has a highly effective anti-bacterial capability in neutral environment. However when under the same circumstances, the others will be weakened.
Application: Caprylhydroxamic acid may be used in emulsion. Anhydrous and surfactant systems. These include creams, lotions, shower gels and make-up. It may be added to the water phase, at ambient or hot temperatures, or may be added post-emulsidication of O/W emulsions. We do recommend avoiding lengthy exposure to elevated temperatures: for example, maximum two hours at 90C, or maximum six hours at 60C.
Magnesium Ascorbyl Phosphate is a water-soluble, non-irritating, stable derivative of Vitamin C. It has the same potential as vitamin C to boost skin collagen synthesis but is effective in significantly lower concentrations and can be used at concentrations as low as 10% to suppress melanin formation (in skin-whitening solutions). It is also important to note that Magnesuim Ascorbyl Phosphate may be better choice than Vitamin C for people with sensitive skin and those wishing to avoid any exfoliating effects since many Vitamin C formulas are highly acidic (and therefore produce exfoliating effects).
Magnesium Ascorbyl Phosphate is a very stable vitamin C derivatives (L-Ascorbic acid mono-dihydrogen phosphate magnesium salt) which does not degrade in formulas containing water. In skin care products, Magnesium Ascorbyl Phosphate is used for UV protection and repair, collagen production, skin lightening and brightening, and as an anti-inflammatory. It is also a potent antioxidant.It is considered an excellent non-irritating Sakin whitening agent that inhibits skin cells to produce melanin and lightens age spots, and is a great alternative to Quinone. Magnesium Ascorbyl Phosphate is a also a potent antioxidant that can protect skin from oxidation and UV rays, and is used as an anti-inflammatory(source).It can improve appearance of aged and fragile skin. Widely used as add-on ingredient in skin-lightening products to correct hyperpigmentation and age spots. Antioxidant effect can be increased by combining Magnesium Ascorbyl Phosphate with L-Ascorbic acid and/or vitamin E.
Glabridin is one of the main flavonoids in Glycyrrhiza glabra, a natural substance with outstanding whitening effect, which can
only be extracted from the rare Glycyrrhiza glabra. In 1000kg of Glycyrrhiza, only 100g of Glycyrrhiza can be obtained. The
scarcity and extraction difficulty make 1g of Glycyrrhiza equivalent to 1g of physical gold.
Glabridin is a kind of flavonoid active ingredient derived from licorice root. It is a common skin whitening
ingredient. Only 1g Glabridin can be extracted from per 500kg licorice root. And its whitening effect is 1000
times that of vitamin C. Therefore, it also enjoys the name of "Whitening Gold". Glabridin, as a major ingredient
of licorice for skin, is mild and non-irritating.
Glabridin is recognized as a safe and scientific whitening cosmetic ingredient.
As a natural whitening ingredient, the skin-whitening mechanism of Glabridin mainly includes:
(1)inhibiting tyrosinase activity
(2)inhibiting the activity of dopachrome tautomerase(tRP-2)
(3)inhibiting the activity of DHICA oxidase;
(4)exerting the function of endothelin antagonist;
(5)increasing the total antioxidant capacity of the skin;
(6)effectively scavenging oxygen free radicals and its chain reaction. Moreover, through these synergistic effects,
it effectively prevents the polymerization of 5. 6-dihydroxyindole( DHI)and the production of dopachrome. Thereby
Glabridin can disturb and hinder the formation and transport of melanin; and then it inhibits and reduces
pigmentation so as to achieve whitening skin effect.
Sodium Stearate
Sodium stearate is a white oily powder with a slippery feel and fatty odor.
Soluble in hot water or hot alcohol.
The aqueous solution is alkaline due to hydrolysis and the alcoholic solution is neutral. Produced by the interaction of octadecanoic acid and sodium hydroxid.
Used in toothpaste manufacturing, also used as water repellent and plastic stabilizer.
Sodium polyacrylate is a white powder. Odorless and tasteless. Very hygroscopic. Polymer compounds with hydrophilic and hydrophobic groups. Slowly dissolves in water to form a very viscous transparent liquid. The viscosity of its 0.5% solution is about Pa�?�¢?�?�¢s. The viscosity is not caused by water absorption and swelling (such as CMC, sodium alginate), but due to the many anionic groups in the molecule. The ionic phenomenon causes the molecular chain to grow and the viscosity increases to form a highly viscous solution. Its viscosity is about 15-20 times that of CMC and sodium alginate. Heat treatment, neutral salts, and organic acids have little effect on its viscosity, but when it is alkaline, the viscosity increases. Insoluble in organic solvents such as ethanol. Strong heat to 300 degrees does not decompose. The long-term viscosity changes very little, and it is not easy to decay. Because it is an electrolyte, it is susceptible to the influence of acid and metal ions, and the viscosity is reduced.
Glycerol (also called glycerine or glycerin) is a simple polyol compound. It is a colorless, odorless, viscous liquid that is sweet-tasting and non-toxic. The glycerol backbone is found in all lipids known as triglycerides. It is widely used in the food industry as a sweetener and humectant. Glycerol has three hydroxyl groups that are responsible for its solubility in water and its hygroscopic nature.
1. Used to make nitroglycerin, alkyd resin and epoxy resin.
2. In medicine, it is used to prepare various preparations, solvents, hygroscopic agents, antifreeze and sweeteners, and to prepare external ointments or suppositories.
3. In the coating industry, it is used to prepare various alkyd resins, polyester resins, glycidyl ethers and epoxy resins.
4. Used in the textile and printing and dyeing industries to prepare lubricants, moisture absorbents, fabric anti-shrinkage treatment agents, diffusing agents and penetrants.
5. In the food industry, it can be used as a sweetener, hygroscopic agent and solvent for tobacco agents.
6. It is widely used in papermaking, cosmetics, tanning, photography, printing, metal processing, electrical materials and rubber industries.
7. It is also used as fuel for automobiles and airplanes as well as antifreeze in oil fields.
8. Glycerin can be used as a plasticizer in the new ceramic industry.
Gum rosin or refined gum rosin is a kind of natural resin, mainly composed of various kinds of resin acids; it can be dissolved easily in many organic solvents and has special chemical activity. So, it is an important raw material for the production of paper, coatings, inks, rubber, soaps, electronic industrial products, food grade ester gum, rosin ester resins etc.
Theanine Extract Introduction
Theanine, an amino acid found in tea leaves, has calming effects and is known to promote relaxation without causing drowsiness. It may help reduce stress and anxiety. Theanine is associated with improved sleep quality. It may enhance the quality of sleep by promoting relaxation and reducing the time it takes to fall asleep. Theanine, often found in green tea, has been studied for its cognitive-enhancing effects. It may help improve focus, attention.
Theanine Extract Key Point
Some studies suggest that theanine may have a blood pressure-regulating effect, promoting cardiovascular health by helping maintain healthy blood pressure levels.and cognitive performance. Theanine is believed to have mood-enhancing properties, potentially contributing to a more positive and calm state of mind.
Benzyl Chloride is an important raw material that mainly used in manufacturing dye intermediates, pesticides and phenmethyl plastics. It is also used as the synthesis of spices and intermediate of pharmaceuticals and other organics.
CETEARYL ALCOHOL cas 67762-27-0 Basic information:
Cetearyl alcohol is a white granular or flake solid with special smell. Insoluble in water, soluble in ethanol, ether, and other organic solvents, with the universality of alcohols.
Cetearyl alcohol is obtained from esterification, hydrogenation and fractionation of natural oils. Fatty alcohols are used in cosmetics, plastics, leather, textile, synthetic detergents and other industries. They are suitable for all kinds of cosmetics, and are especially suitable for cream and lotion. Cetearyl alcohol in medicine can be directly used in w / O emulsifier, cream, ointment matrix, hair care and skin care. Cetearyl alcohol also used as raw material of textile auxiliaries in industry.
Benzalkonium chloride is a cationic surfactant, a non-oxidizing bactericide, with a broad spectrum and efficient bactericidal and algicidal ability, which can effectively control the proliferation of bacteria and algae in water and the growth of slime, and has good slime stripping and certain dispersion and penetration, and has certain oil removal, deodorization and corrosion inhibition.
32563 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
