Polysorbate 80 USP/NF is a hydrophilic nonionic surfactant used as an emulsifier or surfactant in foods, medicines, skincare products, vaccines etc. It also acts as a surfactant in soaps and cosmetics.USP NF is a combination of two compendia, the United States Pharmacopeia (USP) and the National Formulary (NF). Sales Specifications Appearance: Oily, colorless or brownish yellow, clear or slightly opalescent liquid Solubility: Dispersible in water, in anhydrous ethanol, in ethyl acetate and in methanol, practically insoluble in fatty oils and in liquid paraffin Relative Density (g/ml): About 1.10 Viscosity @ 25oC: ~ 400 Identification A) By infrared absorption: The absorption maxima in the spectrum obtained with the sample shall correspond to the reference spectrum of polysorbate 80/reference standard B) Test for hydroxyl value: Should comply with the test for hydroxyl value C) Test for saponification value: Should comply with the test for saponification value D) Test for composition of fatty acids: Should comply with the test for composition of fatty acids E) Chemical test: The solution should become blue Acid Value (mgKOH/g):2.0 Max Hydroxyl Value (mgKOH/g):Between 65 and 80 Peroxide Value:10 Max Saponification Value (mgKOH/g):Between 45 and 55 Composition of fatty acids by GC a) Myristic Acid:5.00 % Max b) Palmitic Acid:16.00 % Max c) Palmitoleic Acid:8.00 % Max d) Stearic Acid:6.00 % Max e) Oleic Acid:Not less than 58.00 % f) Linoleic Acid:18.00 % Max g) Linolenic Acid:4.00 % Max Ethylene Oxide & Dioxane a) Ethylene Oxide:1 ppm Max b) Dioxane: 10 ppm Max Water: 3.00 % Max Total ash: Not more than 0.25 % Packing 485 lb drum, 4 drums per pallet
Potassium Carbonate is mainly used in the soap, glass and dishware production but it can also be used for various other applications like mild drying agent, food production like grass jelly and moon cakes, alkalization in cocoa powder, a buffering agent in the production of mead and wine, water softening agent, fire suppressant, and a nutritional supplement in animal feed. Specifications Appearance: White granular K2CO3: â?¥ 99.50% KOH: < 0.20% KCl: < 0.015% K2SO4: < 0.01% Fe: < 5 PPM Na: < 0.4% Pb: < 2 PPM Ignition Loss: < 0.50% Packing 55.12 LB Bag, 40 Bags per Pallet
Polysorbate 20 USP/NF is a polysorbate-type nonionic surfactant used in many commercial and household products. It is composed of 20 repeated units of polyethylene glycol via ethoxylation. Polysorbate 20 USP/NF is a wetting agent, as well as washing agent, stabilizer and solubilizer in food products, laboratory assays and industrial applications. It is also an excipient that stabilizes emulsions and suspensions and lubricant in ophthalmic solutions. Polysorbate 20 USP/NF is used by philatelists to remove stamps from envelopes and to remove residues from stamps, without harming the stamp itself. Polysorbate 20 USP/NF is also used as wetting agent in rubber balers in the elastomer industry. Polysorbate 20 has been used as a shape directing agent to synthesize spheroidal magnetite nanoassemblies. USPâ??NF is a combination of two compendia, the United States Pharmacopeia (USP) and the National Formulary (NF). Specifications Appearance: Oily, yellow to brownish-yellow, clear or slightly opalescent liquid Solubility: Soluble in water, in ethanol, in ethyl acetate & in methanol; practically insoluble in fatty oils and in liquid paraffin Relative Density: About 1.10 Viscosity @ 25oC: ~ 400 Identification: A) By IR: Should comply with the test for IR B) Test for hydroxyl value: Should comply with the test for hydroxyl value C) Test for saponification value: Should comply with the test for saponification value D) Test for composition of fatty acids: Should comply with the test for composition of fatty acids E) Chemical test: The solution should become blue Acid Value (mgKOH/g): 2.0 Max Hydroxyl Value (mgKOH/g): Between 96 and 108 Peroxide Value (meq/kg): 10 Max Saponification Value (mgKOH/g): Between 40 and 50 Composition of fatty acid (fraction of the substance) a) Caproic Acid: 1.00 % Max b) Caprylic Acid: 10.00 % Max c) Capric Acid: 10.00 % Max d) Lauric Acid: Between 40.00 % and 60.00 % e) Myristic Acid: Between 14.00 % and 25.00 % f) Palmitic Acid: Between 7.00 % and 15.00 % g) Stearic Acid: 7.00 % Max h) Oleic Acid: 11.00 % Max i) Linoleic Acid: 3.00 % Max Ethylene Oxide & Dioxane a) Ethylene Oxide: 1 ppm Max b) Dioxane: 10 ppm Max Water: Between 0 and 3.00 % Total ash: Not more than 0.25 % Packing 485 lb drum, 4 drums per pallet
Polyquaternium-7 is used as a modifier, it has various industrial applications such as, It can also be used in waste treatment for laundry, emulsion breaking, sludge dewatering and drainage and retention aid. It is a cationic polyelectrolyte. Sales Specification Appearance: Colorless to Light Yellow Transparent Liquid Active Content: 10.0�±0.5% pH: 5.0-80 Viscosity (25 degree C): 7500-15000 Water Solubility: Easily Soluble in Cold Water Packing 200 kg drum 4 drums per pallet
Polyphosphoric Acid is used in organic synthesis for cyclizations and acylations. It is also used industrially as a dehydrating agent, catalyst, and oxidizing agent. Specifications Appearance: Colorless Viscous Clear Liquid Phosphoric Acid H3PO4, % w/w: 115 Min Arsenic as As, ppm: 100 Max Sulphate as SO4, ppm: 100 Max Iron as Fe, ppm: 20 Max Nitrate as NO3, ppm: 5 Max Total Heavy Metals as Pb, ppm: 20 Max Color, ppm: 30 Max Fluoride as F, ppm: 10 Max Phosphate P2O5, % w/w: 83.30 Min Gravity (at 20�°C): 2.015 Min Packing 749.564 Lb (340 KG) drum, 4 drums per pallet 3527.36 lbs (1600 kg) IBC Tote DOT Transportation UN/NA: UN3264 Proper Shipping Name: Corrosive Liquid, Acidic, Inorganic, N.O.S. (Polyphosphoric Acids) Hazard Class: 8 Packing Group: III
Phosphorous Acid is primarily used as a chemical intermediate in the production of various phosphorus compounds, particularly as a key component in the manufacturing of PVC stabilizers like basic lead phosphite, and also serves as a strong reducing agent in organic synthesis; its applications include the production of synthetic fibers, organophosphorus pesticides, and highly efficient water treatment agents like ATMP (aminotrimethylene phosphonic acid). Specifications MAIN CONTENT (BASED ON H3PO3) %: â?¥98.5 CHLORIDE (BASED ON CL) % :â?¤0.005 IRON(FE) PPM: â?¤50 SULFATE (BASED ON SO4) %: â?¤0.008 PHOSPHATE (BASED ON PO4) %: â?¤0.2 APPEARANCE :WHITE CYRSTAL Packing 2204.6 lb super sack DOT Transportation UN No.: 2834 Proper Shipping Name: Phosphorous Acid Hazard Class: 8 Packing Group: III
Pearlescent Paste is used in personal care products like creams and lotions, shampoos, liquid soaps, and bath gels. It can also be used as a softening agent in laundry liquid formulations and as a general-purpose emulsifier and emulsions stabilizer in a wide range of industrial applications. Specifications Appearance: Pearl White Viscous Liquid Active Matter: 9.0-13.0% Solid Content: 40.04.0% Sodium Chloride: 3.0% Max pH (5%): 8.0-9.0 Packing 463 Lb Drum, 4 drums per pallet
Palmitic acid is used to produce soaps, cosmetics and personal care products, and industrial mold release agents. These applications use sodium palmitate, which is commonly obtained by saponification of palm oil. Palmitic Acid is used in the following products: soaps and detergents, coating products, polishes and waxes, air care products, fillers, putties, plasters, modelling clay, plant protection products, finger paints, adhesives and sealants and biocides (e.g. disinfectants, pest control products). Palmitic acid can be further refined or combined with other chemical agents to produce isopropyl palmitate, cetyl alcohol and other additives. Sales Specification Iodine value, (al2, 100 g): 0.3 Max Saponification value (mg KOH/g): 217-221 Acid Value (mgKOH/g): 216-220 Titre: 60-63�°C Colour, Lovibond 5 1/4,Y: 2.0 Yellow Colour, Lovibond 5 1/4,R: 0.2 Red Colour, APHA: 40 Hazen Package 25 Kg plastic woven bags.
Oxalic Acid Dihydrate is used in various industrial applications such as a Precipitating agent in rare earth mineral processing, bleaching agent in textile activities and wood pulp bleaching, rust remover for metal treatment, grinding agent such as marble polishing, waste water treatment, calcium remover in water, cleaning and sterilizing equipment, reducing agent for photography and ink removal, purifying agent in pharmaceutical industry. Oxalic Acid is also used to remove food and rust satins from kitchen countertops, plumbing fixtures and fabrics. Physical And Chemical Properties Physical State: Fine White crystal Melting Point: 101-102C Boiling Point: 149-160C Specific Gravity: 1.6-1.7 Solubility in Water: 1 g/7ml Vapor Density: 4.4 NFPA Ratings: Health: 3; Flammability: 1; Reactivity:0 Flash Point: 163 C Stability: Stable under ordinary conditions Sales Specification Appearance:Fine white crystal Assay: > 99.60 % Ca: < 15 ppm Fe: < 15 ppm Na: < 15 ppm K: < 15 ppm Pb (Heavy Metal content): 10 ppm SO4 (Sulfate content): 800 ppm Packing 50 Lb bag, 44 bags per pallet 2204.60 Lb supersack, 1 supersack per pallet
Oleic Acid RSPO kosher is used mainly in Food ingredients, esters, surfactants, transparent soaps, cosmetics and personal care products. Lubricants, metallic soaps, coatings and adhesives. Specifications Appearance at 30 Deg. C : Pale Yellow Liquid, free of foreign matter Colour, Lovibond, Max (In 5, 1/4 Cell) : Y=8.0,R=1.0 Acid Value(mg KOH/g): 195-205 Saponification Value(mg KOH/g): 196-206 Iodine Value (g I2/ 100g): 90.0-105.0 Cloud Point (C): 8.0 Max Packing 397 LB drum, 4 drums per pallet
Odorless Mineral spirits is a petroleum-based product. Mineral spirits is an oil based solvent ideally used for thinning oil based exterior and interior varnishes, and paint products, as well as an efficient solvent for artist's oil paints, inks, thinners, stains, and agrochemicals formulations. Physical And Chemical Properties Appearance: Light colored, Liquid Form: Liquid Color: colorless Odor threshold: Hydrocarbon-like PH: No data available Boiling Point: 315.00oF / 157.22 oC Freezing Point: Data N/A Melting Point: -94oF / -70oC Vapor pressure: 0.07 kPa@20oC/68oF Specific Gravity: 0.758@15.6oC/60.0oF Evaporation rate: 0.11 2-Butyl Acetate Packing 340 LB Drum, 4 drums per pallet
2,2,3,3,4,4,5,5-Octafluoro-1-pentanol is a colorless liquid with a purity up to 99%, it has applications in the pharmaceutical industry as a building block for drug synthesis and as an additive in organic solvents. ,2,3,3,4,4,5,5-Octafluoro-1-pentanol is used as a cosurfactant in the synthesis of silver and silver iodide nanocrystals. Its also used as a dye solvent in CD-R(W) and DVD-R(W) industry. It can also be used in making textile treatment agent and. Specifications Appearance Transparent Liquid Purity (GC): 99.0% Min Moisture (K-F):120 PPM Max Packing 11 lb plastic container
Nitrilotriacetic Acid (NTA) Also known as FlexaTrac-NTA is an effective, environmentally-friendly chelating agent used to reduce the negative effects of hardness ions in applications like dish washing, hard surface cleaning and sulfur scavenging in refineries. Thirty percent more effective than other commonly-used chelating agents, NTA requires less material to chelate the same amount. NTA is mainly used in cleaning industrial applications. FlexaTac-NTA is made in a powder and 40% solution to meet the needs of most formulations. Nitrilotriacetic Acid (NTA) Powder( FlexaTrac-NTA -100 Ascend Brand) WC Code: 14-045-01 Specifications Appearance: White, crystalline powder Assay, % N(CH2COONa)3 H2O: 99 min Through 200 Mesh: 30 max Auto ignition temperature C: 571 Decomposition temperature C: 340 Specific Gravity @ 25C / 15.5C: N/A pH, 1% Solution @ 25C: 10.5-11.7 Flash Point, F (Pensky-Martin cc): 275.1 Total Moisture, % @ 200C: 7 max Packing 50 Lb Bag, 40 bags per pallet 500 Kg Supersack
The main industrial use of nitric acid is it is used for the production of fertilizers. The other main applications are for the production of explosives, nylon precursors, and specialty organic compounds. It has also been used in various forms as the oxidant in liquid fueled rockets. Nitric Acid is also used in metal processing as an oxidant and used as an analytical reagent in elemental analysis. It is also used in low concentrations in wood working, for artificially aging pine and maple. Nitric Acid is also used in the cleaning industry as an etchant, degreaser and cleaning agent. Specifications HNO3: 68.0 wt% Min HNO2: 100 ppm Max Cl: 4 ppm Max Fe: 4 ppm Max Ig-Residue: 100 ppm Max Pb: 0.1 ppm Max Arsenic: 3 ppm Max Gravity (20oC, Sp.Gr): 1.405 Min Packing 617.288 lb drum, 4 drums per pallet DOT Transportation UN/NA: 2031 Proper Shipping Name: NITRIC ACID (other than red fuming with at least 65%, but not more than 70% nitric acid) Hazard Class: 8, 5.1 Packing Group:II
Nickel Sulfate Hexahydrate also known as Nickel (II) Sulfate is mainly used in industrial applications such as the production of batteries, pigments and catalysts, in Electroplating, nickel-cadmium battery, organic synthesis, catalyst in painting production, raw materials of nickel salt for coloring of metals and additives of reduction dye. Nickel Sulfate is also used for making paper clips, keys, enamel dyes, and electrical wiring. Nickel Sulfate Hexahydrate -Nornickel WC Code: 14-010-1 Sales Specificationa Appearance: Green crystal Nickel: 22.3% Iron:
Nickel(II) fluoride tetrahydrate is used mainly in industrial applications such as in surface treatment of aluminum profile and printing ink making, in the production of fluorescence lamps, fluidizer and catalyzer for organic synthesis. For use in oxygen-sensitive applications, such as metal production. As a catalyst for the synthesis of chlorine pentafluoride. Sales Specification Appearance: Green crystal NiF2 4H2O %: 94.49 % Fluorine as F %: 21.40% Nickel as Ni %: 32.92 % Free Moisture %: 05.09 % Iron %: 00.012% Chloride %: 00.0132% Sulphate %: 00.019% CU %: Zn %: Packing 55.12 lb paper bag, 40 bags per pallet DOT Transportation UN/NA: UN3288 Proper Shipping Name: Toxic solid, inorganic, n.o.s. (Nickel (II) Fluoride Tetrahydrate) Hazard Class: 6.1 Packing Group: III Marine Pollutant: No
Nickel Chloride Solution WC Code: 14-009-02 CAS: 7718-54-9 Sales Specification Appearance: Clear green liquid Specific gravity20oC: 1330 - 1350 g/mL Content (as Ni): 178.0 -182.0 g/L Pb: 2.00 mg/kg Max. Cu: 1.00 mg/kg Max. Cr: 1.00 mg/kg Max. Fe: 10.00 mg/kg Max. Zn: 1.00 mg/kg Max. Packing 279 Kg drum DOT Transportation UN/ID/NA number :UN 3082 Proper shipping name: Environmentally hazardous substance, liquid, n.o.s. (Nickel (II) Chloride) Hazard Class:9 Packing group: III
Nickel chloride hexahydrate is a high-purity chemical compound used in various industries such as electroplating, catalyst manufacturing, material science, electronics, pharmaceutical research and organic synthesis. Nickle Chloride Hexahydrate is also used as a catalyst for making dialkyl arylphosphonates. Nickel Chloride Hexahydrate, is used as a reagent in nickel electroplating, as an anode activator in rapid nickel plating, and as an ammonia absorber in industrial or gas masks. For the manufacture of catalysts, dry batteries. Creates invisible ink. Nickle Chloride Hexahydrate is also used in Electroforming, Electroless Plating, Dye mordant, Insecticides, Glass colorant and other chemicals. Nickle Chloride Solution is also known as Nickle Chloride Anhydrous, is used mainly as a plating agent and metal surface treating agent. Nickel Chloride Hexahydrate WC Code: 14-009-01 CAS: 7791-20-0 Molecular Formula: NiCl2.6H2O Molecular Weight: 237.70 g/ mol Sales Specification Appearance: Green Crystals Assay: 98% Ni: 24 Co:
Monosodium Phosphate Anhydrous also known as Sodium Dihydrogen Phosphate and Monosodium Dihydrogen Orthophosphate, is a high buffering capacity reagent, also has the sequestrant, emulsifier and mordant properties. It is used to control pH and in industrials applications, it is used as a fireproofing agent, buffering agent, supplement for animal feed. It is employed to prepare different buffer solutions, detergents, ceramics, enamels, and boiler products. It is also used in brazing/soldering, to treat boiler water/wastewater, and to acidify urine. Monosodium Phosphate Food Grade is mainly used as used as a buffer and acidity regulator in food, as a Leavening acid in baking powder and a binder and curing agent for bread and sauce. It's used as a pH buffer, stabilizer, and emulsifier in processed cheese, condensed milk, instant pudding, and other food applications. Monosodium Phosphate Anhydrous MSP (Sodium Dihydrogen Phosphate) FCC WC Code: 13-028-02 Sales Specification pH(1% Solution): 4.4 4.6 Bulk Density gm/cc: 0.60 min. Moisture (at 110 Deg C for 4 hr) %: 1.5 max. Water Insoluble %: 0.1 max. Phosphate as ( P2O5) %: 58.0 59.5 Assay %: 98.0 min. Fluoride as F ppm: 10.0 max. Arsenic as As ppm: 2.0 max. Lead as Pb ppm: 2.0 max. Cadmium as Cd ppm: 1.0 max. Mercury as Hg ppm: 1.0 max Packing 55.12 lb bag, 35 bags per pallet. Monosodium Phosphate Anhydrous FCC Wintersun WC Code: 13-028-03 Sales Specification Assay,%: 98.0-103.0 Arsenic: 3ppm Max Fluoride, %: 0.005 Max Insoluble Substances, %: 0.2 Max Lead: 4ppm Max Loss of Drying, %: 2.0 Max Packing 50 lb bag, 40 bags per pallet.
Monosodium glutamate (MSG) Food Grade/Kosher is a flavor enhancer often added to restaurant foods, canned vegetables, soups, deli meats and other foods. The product complies with US regulation 21 CFR 182.1 and is of food grade quality. Sales Specification Assay: 99.55% Moisture: 0.13% Arsenic: < 2 PPM Chloride (CI): 0.024% Heavy metals (As Pb): < 10 PPM Ph (5% solution): 6.95 Specific rotation: Alpha 24.8 + 24.96 Microbiological Standards Standard plate count: < 1,000 cfu/gram Coliform: Negative E. Coli: Negative Salmonella: Negative Kosher Certificate Is Available Upon Request Packing 50Lb Kraft paper bag, 50 bags per pallet.
