Ammonium chloride is colorless crystal or white crystalline powder; Odorless, salty, cool; It is moisture, soluble in water, slightly soluble in ethanol. Mainly used in batteries, electroplating, dyeing and weaving, casting, medicine, flocking, fluff, for dry batteries, fabric printing and dyeing, fertilizer, tanning, detergent, chemical intermediates and so on.
Genaral: Mainly used in sectors of, pesticide, synthetic fibre, electroplating, photography, accelerator for cement etc
Fibre industriy :as spinning solvent for polyacrylonitrile
Architecture industriy:hardening accelerator for cement and concrete mixes
Pesticide: raw material for the production of a number of herbicides and fungicides
Identification
Synonyms TBHQ; 2-tert-Butylhydroquinone; 2-(1,1-Dimethylethyl)-1,4-benzenediol; Butylhydroquinone
Molecular Formula C10H14O2
Molecular Weight 166.22
CAS Number 1948-33-0
EINECS/CLINCS 217-752-2
Properties
Appearance White to light tan crystalline powder
Melting Point 126.5-128.5C
Solubility Almost insoluble in water, and Soluble in alcohol, acetone & ethyl acetate
Stability Stable under ordinary conditions
Application
Used as antioxidant to preserve various oils, fats and food items by retarding their oxidative deteriation. It is used in formulating vanish, lacquar, resin and oil field additives. It is used as a fixative in perfumary to reduce the vaporation rate and improve stability. It is also used as a stabilizer to inhibit the auto-polymerization of organic peroxides.
Packing and Storage
Packing In kraft paper bag, carton or cardboard drum.
Storage Keep tightly closed.
Safety Information
Non-hazardous for air, sea and road freight.
Property:It is soluble in most organic solvents, slightly soluble in ethylene glycol, insoluble in water.
Application:
DOA is the typical cold-resistant plasticizers with high plasticizing efficiency. Its color changes slightly when heated. It is suitable for PVC, EVC, polystyrene and synthetic rubber resins.
It can make downstream products soft even at low temperature, having good light-resistance and hand-feeling.
It is usually been used with the main plasticizer DOP and DBP for the production of cold-resistant agricultural thin film, frozen foods packaging film, coating layer of wire and cable, artificial leather, board, outdoor water pipe, etc.
In the application of plasticized paste, could make the paste's initial viscosity low and stable.
UV-531 can absorb 240-340 nm ultraviolet light, making it an excellent and efficient anti-aging additive. It has a great protective effect on polymers, helping to reduce color, while delaying yellowing and blocking physical property loss.
Application
UV-531 is a high-efficiency anti-aging additive with excellent performance, which can absorb 240-320nm nanometer ultraviolet rays, and has the characteristics of light color, non-toxicity, good compatibility, and easy processing. It is widely used in PE, PVC, PP, PS, polyurethane, rubber products, etc. Good compatibility with resin and low volatility. The recommended dosage is 0.1%--0.5%.
UV-531 acts as a UV absorber ,finds application in formulating color cosmetics and hair-, sun- and body care products.
Product Name: N-Ethyl-2-pyrrolidone
Synonyms: 1-ethyl-2-pyrrolidinon;1-ethyl-pyrrolidin-2-one;2-Pyrrolidinone, 1-ethyl-;Agsol Ex 2;ethyl-2-pyrrolidone;N-Ethyl-2-pyrrolidinone;N-Ethylpyrrolidinone;N-Ethylpyrrolidone
CAS: 2687-91-4
MF: C6H11NO
MW: 113.16
EINECS: 220-250-6
Melting point 87.5-88.5 C
Boiling point 97 C/20 mmHg (lit.)
density 0.992 g/mL at 25 C (lit.)
vapor pressure 18Pa at 20C
refractive index n20/D 1.465(lit.)
Fp 169 F
storage temp. Sealed in dry,Room Temperature
form Liquid
pka -0.41±0.20(Predicted)
color Clear
PH 8-9 (100g/l, H2O, 20C)
1. m-Cresol can be used as the dye intermediate of color film. And it also can be used in the production of pesticide such as pyrroboron, thiophosphorus sesquimide, inulin dichlorophenyl ether, resin and plasticizer, etc
2. m-Cresol can be used as an analytical reagent and as an intermediate in organic synthesis.
3. Spices allowed.
Main application:
Mainly used in pesticides, perfumes, resin plasticizers, film films, antioxidants, and reagents, etc. All use of m-cresol chemical industry.
Product property
Product name:Potassium oleate
CAS:143-18-0
MF:C18H33KO2
MW:320.55
Density:1.1 g/cm3
Package:1 kg/bag, 25 kg/bag, 25 kg/drum
Property:It is easily soluble in water, soluble in hot alcohol
Application
1.It is mainly used for catalyst of the reaction of polyisohydro urea esters in polyurethane foam.
2.It can also be used as emulsifiers, foaming agents, detergents, lubricants and surfactants.
Storage
The storeroom is ventilated and dried at low temperature
Ethoxylated hydrogenated castor oil (PEG-40 hydrogenated castor oil) is a combination of synthetic polyethylene glycol (PEG) with natural castor oil. Ethoxylated hydrogenated castor oil can be used to emulsify and solubilize oil-in-water (o/w) emulsions.
Methyl tert-butyl ether (MTBE) is a colorless, transparent, low-viscosity, volatile liquid with a distinctive odor and an oxygen content of 18.2%.
lts vapor is heavier than air. Diffuses along the ground and burns when co-existing with strong oxidants.
The main use of methyl tert-butyl ether is as an organic solvent and can also be used as a gasoline additive to make it more antiknock.
Application
ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect. Ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect.
Trichloroisocyanuric acid disinfection performance is excellent, is a new generation of broad spectrum, high efficiency, low toxicity fungicide, bleach and shrink resistant agent. Mainly used for drinking water, industrial water recycling, swimming pools, restaurants, hotels, public places, families, hospitals, and prevention of fish disease, poultry eggs and other disinfection and sterilization. It can kill almost all fungi, bacteria, viruses and spores.
Product Name: LITHIUM IRON PHOSPHATE CARBON COATED
CAS NO.:15365-14-7
Appearance: Black Powder
Purity:99%
Melting Point:>300 �??�?�°C
Application
Due to the inherent structural stability of lithium iron phosphate, especially its unparalleled advantages in safety and cycling performance, batteries using lithium iron phosphate cathode materials can be widely used in multiple fields.
Sodium Silicate, also known as water glass, it has two forms: liquid and solid.The liquid is common, colorless clear or light gray deup. The solid is light blue or light green crystals, transparent or semi-transparent .Sodium Silicate is made from sodium oxide and silicon dioxide.
Application:
1. Chemicals: Raw material for the manufacture of amorphous silica, silica gel, molecular screens and white fillers.
2. Detergents: Additive for alkalinity control and corrosion inhabition.
3. Textiles:
(1)Stabilizer in bleaching with hydrogen-peroxide.
(2)Metal sequestering agent.
(3)PH regulator.
4. Paper:
(1)Adhesive for corrugated cardboard.
(2)Stabilizer in bleaching with hydrogen-peroxide.
5. Foundry: Binder of molding sands.
6. Mining: Additive for mineral pelletizing.
7. Construction: Floor consolidation.
8. Welding: Binder in manufacture of rods.
9. Metallurgy and Refractory: Materials Setting accelerator for cement and refractories curing ( gunited)
ATMPNa4 is the salt of ATMP, it can inhibit the scale formation, calcium carbonate in particular, in water system. ATMPNa4 can be used in circulating cool system in power plant, oil refinery plant and oilfield refill water system. ATMPNa4 has good synergistic effects with other additives, in neutral to acidic condition, no ammonia smell is let off.
ATMPNa4 is used together with other organophosphonic acid, polycarboxylic acid or salt to form organic alkaline agents, it is used in circulating cool water system for all water quality.
Benzalkonium chloride is a cationic surfactant, a non-oxidizing bactericide, with a broad spectrum and efficient bactericidal and algicidal ability, which can effectively control the proliferation of bacteria and algae in water and the growth of slime, and has good slime stripping and certain dispersion and penetration, and has certain oil removal, deodorization and corrosion inhibition.
31776 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
