Execution MM Inches ISO Tolerance Cold Drawn 3.50-40.00 3/16"-1. 1/2" h11 Polished and Ground 5.00-40.00 3/16" -1.1/2" h11
Execution MM Inches ISO Tolerance Cold Drawn 4.00 -40.00 3/16"- 1.1/2" h11 Polished and Ground 5.00 -36.00 3/16"-1.1/2" h11 All the above Products are available in Alloy Steel, Stainless Austenitic Steel, Ferritic Steel as well as Martenisitic Steel Grades.
DRAWN FLAT BARS S.S. Flat Bars have over a period gained tremendous importance as it is now the most preferred material in Architectural Structures, Building Frames and Structures, Decorative Hardware and also for various general purposes for shaft keys and special purpose applications. DH manufactures a wide range of flat bars in a variety of sizes, thickness, grades and finish suited to critical applications. These are produced to international specifications, maintaining close dimensional tolerances and required mechanical properties. Technical Specification: SIZES GRADES FINISH 6.00 X 4.00 6.10 X 4.10 6.50 X 4.10 6.60 X 4.10 8.00 X 6.00 8.10 X 6.10 10.00 X 6.00 10.00 X 8.00 10.10 X 8.10 12.00 X 5.00 12.00 X 6.00 12.00 X 8.00 12.10 X 8.10 12.00 X 10.00 12.10 X 10.10 GRADES: AISI-410 / 420 /430 / 304 / 316 / 201 / 204Cu FINISH: Cold drawn
Half Round Bars Most commonly used for Hardware purposes are very popular throughout the world. Technical Specification: SIZES: 12mm -25mm GRADES : AISI-201, 204Cu,304, 316 PSQ Pump Shaft Quality under the product DH produces PSQ bars in both Austenitic as well as Martenistic grades. Austenitic stainless steels are most commonly used. Austenitic stainless steel pump shafting is not magnetic; due to its high nickel and chromium composition, it is extremely resistant to corrosion. In addition, austenitic stainless steel pump shafting provides excellent mechanical properties. Heat treatment cannot be used to harden austenitic stainless steel pump shafting, although it can be hardened considerably by cold working. Grades Available in Austenitic Steel:- AISI-410 AISI-416 AISI-420 DH produces PSQ bars with superior finish and straightness tolerance by an additional process using modern techniques and state-of-art machinery and types of equipment including special finishing machines to give a smooth and mirror finish surface. Thus wear-free running of the impellers is ensured. DH also provides chamfering at 30- 45 degrees as per customer requirements. The bars thus produced undergo stringent quality and inspection test in order to ensure the exact technical requirements have adhered during the production as per O.E.M. specifications. Thereafter the bars are wrapped in HDPE sheets and then stuffed inside export-quality wooden boxes as per the specific requirements of the customer. DH also provides other types of packing like tube packing of each bar, putting 3-4 rubber/plastic "O" rings throughout each bar as per specific requirements from their customers. The details of such packing are precisely explained in our Packing segment under this website. Specification: Size Range : 10mm-70mm Diameter Tol. : h9, h8 Ovality: 1/2 the diameter tolerance Straightness: Upto 0.5mm per 1 meter Length : 2.5 meters - 6 meters Surface : Smooth / Mirror Finish The common application of PSQ Bars:- The PSQ bars are commonly used at following Industry levels:- Pneumatic and Hydraulic Cylinder Shafts Textile Machinery Shafts Piston Shafts Precision Shafting Chemical Pump Shafts
ZB0201-4 Stainless Steel Open Base Cleat - Boat Cleats, Rope Cleat, Boat Dock Cleats for Marine, Deck * Heavy-duty hollow base boat cleat with open base 4 holes. * Investment cast 316 stainless steel construction, durable in saltwater environment and good welding performance. * 4 inch overall length, 2 inches from screw hole to screw hole. * High polished surface for mirror-like appearance to match marine uses watercraft / boat / yacht, boat docks, decks, piers for tying up boats, kayaks, jet ski's, etc. * Wide Application: For maritime, beach, garden, pool, coastal decorations; use them as cabinet pulls, towel hooks outdoors,rustic coat hanger, curtain tie-backs, nautical coat hooks, and so on. * Dock cleat made of Marine grade 316 stainless steel * Rope cleat work for dock lines ,mooring and etc. * Kayak cleat stainless steel marine grade * Dock cleat open base,easy line tie-off for any Boat * Open base cleats stainless steel marine
SS PIPE
Aluminum Extrusion 6063 Scrap Density: 2.702g/cm�³ Melting point: 660.37â?? Boiling point: 2467.0â?? Color: silver white Category: Aluminum Description ITEM VALUE RESULT(%) Al Margin 98.32 % Si 0.20-0.60 % 0.37 % Cu 0.10 % 0.09 % Mg 0.45-0.9 % 0.60 % Zn 0.10 % Max 0.10 % Mn 0.10 % Max 0.10 % Ti 0.10 % Max 0.10 % Cr 0.10 % Max 0.10 % Fe 0.35 % Max 0.15 % Sum 0.15 % Max 0.07 %
Copper wire scrap 99.9% / Copper Milberry Wire scrap Product Description High purity copper wire scrap Application fields : 1. mainly used for electronic industry and electrooptical technology 2. In the float glass production , molten glass floating on molten tin pool surface iseasily to be cooled and solidified. 3. widely used as a coating material in High-precision electronic products, and other requirements of precision welding products, welding products, general electronics, food industry packaging, automotive and electrical industry, and high temperature resistant products. Categories: Copper, Wire scraps Description Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Specification: ELEMENTS VALUE RESULT Copper Cu 99.95% Min. Cobalt Co 0.001% Max. carbon C 0.003% max Iron Fe 0.005% Max. phosphorus P 0.01% Max. sulphur S 0.01% Max. Znic Z 0.03% Max.
Cheap Aluminium Wire Scrap 1. Performance Features: Enameled aluminum wire, High resistance to heat shock, high temperature and good performance at softening breakdown, suitable for high-speed automated routing, able to be direct weld, with no pinhole, resistive to high frequency, wearing, refrigerants and electronics corona, high breakdown voltage, Great insulation capability, long service life, excellent high temperature resistant, Light weight, good adhesiveness 2. Application: Widely used in electrical tools, ballasts, automotive electronics, refrigerator and air conditioner compressor motors, television sets, electric stove, microwave ovens, various transformers, and other kinds of electronic coil motors, and electrical appliances. 3. Specification : Item Test Standard % Test result % Aluminium wire scrap 99.7% Al 99.7% 99.75 Fe 0.20 0.195 Si 0.13 0.12 Cu 0.01 0.075 Ca 0.03 0.03 Mg 0.03 0.027 Zn 0.03 0.03 Mn 0.3 0.25
Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery parts, plated brass, etc Specification - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min -Cu -: 58% - 60% -Pb -: 1.5% - 2.5% -Imp -: 0.3% (Max.) -Zn -: Remaining Consist of: doors and windows Profile frame, house utensils Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery
We are direct suppliers of ELECTRIC MOTOR SCRAP, our ELECTRIC MOTOR SCRAP is free from any contamination or whatsoever. We can supply large quantities on a monthly basis at competitive prices. We hope to work with your esteemed company on long term basis.
We sell Fridge/AC Compressor Scraps at a very competitive market price. Please kindly find some specification below. 1) Quantity: between 1,500 MT up to 3,600 MT per month. 2) Packing: As buyer requires (20ft container is up to 3000 pcs to 3450 pcs of compressors in the container. 25 MT or 26 MT) 3) Delivery: Immediately and prompt. Specifications Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Monthly Supply Capacity: 500 - 1500 metric tons, Type: Fridges, AC. Minimum Order acceptable 1x20FCL (25MT or 26MT/20FCL, 3000 or 3450 Pieces/20FCL
Used Rails ( R50 - R65 ) Composition C - 0.54-0.82%, SI - 0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: - 0.01% Maximum of Mass Share 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment. Specifications ISRI 201 No. 1 : Heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness, individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. ISRI 202 No. 1 : Heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. ISRI 203 No. 2 : Heavy melting steel.* Wrought iron and steel scrap, black and galvanized, 1/8 inch and over in thickness, charging box size to include material not suitable as No. 1 heavy melting steel Prepared in a manner to ensure compact charging. ISRI 204 No. 2 : Heavy melting steel.* Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include all automobile scrap properly prepared. ISRI 205 No. 2: Heavy melting steel 3 feet by 18 inches. Wrought iron and steel scrap black and galvanized, maximum size 36 x 18 inches. May include automobile scrap properly prepared, however, to be free of sheet iron or thin-gauged material. ISRI 206 No. 2: Heavy melting steel 5 feet by 18 inches. Wrought iron and steel scrap black and galvanized, maximum size 60 x 18 inches. May include automobile scrap properly prepared, however, to be free of sheet iron or thin-gauged material.
We can supply Used Rails R - 50 & R - 65 through Baghlaf Steel from Saudi Arabia 1.Origin of Used Rails is Kingdom of Saudi Arabia 2. Quantity we can Supply is 100,000 MT X 12 Months = 1.2 Million Tons 3. Price is US$: 245 PER MT C I F - ASWP ... Price Includes Commission of $: 3 Per MT $:3 Per TON Commission means Commission of 3.6 Million Dollars Commission which Sellers pays in the very first month after opening of L / C 4. Loading of Used Rails will be at Jeddah Sea Port in Saudi Arabia. 5. Payment is at the Destination Sea Port of Buyer after Successful SGS Inspection. 6. End Buyer Opens Month to Month LC MT 700 from a Prime Bank and gets 20 % PB 7. End Buyer pays a Refundable Deposit of $:1334 to get Commercial Invoice 8. This Amount of $:1334 will be Returned back to the End Buyer when he Opens L/C Proper LOI to :----------- NOTE :-- Photos Video and Specs are attached here for your Good Self. Buyer to Address LOI or ICPO to : -- Swat Al Khail Trading Est. Kingdom of Saudi Arabia
Our advantage 1. Higher Quality Products 2. The corrosion resistance of forged flanges is very good 3. Shorter Production Cycle 4. More Types of Surface Treatment 5. More Cost-saving Freight Routes 6. More Comprehensive Service 7. Steel Flange Suppliers
we have for sale Helicopters Mi8 / Mi17. - Sale helicopter engines D3-117D 02-s, refurbished and with warranty... - If you have engines that need renovating, we renovate them and offer you a warranty. - Sale - spare parts for all Helicopters type Mill - Mi 8/Mi17 engines and parts, etc..... Awaiting your answer.
- Sale helicopter engines TV3-117VM 02-s, refurbished and with warranty... - If you have engines that need renovating, we renovate them and offer you a warranty. - Sale - spare parts for all Helicopters type Mill - Mi 8/Mi17 engines and parts, etc.....
Product :Scrap Type : mixed Scrap [Rebar & Wire] Stock Available : KSA Price : AED : 2,200.00 / MT [Negotiable] Total Quantity : 2,500 MT Payment Terms : CAD MOQ : 2,500 MT Shipment Term : EXW , KSA Looking for Buyer : Worldwide
Stainless steel hydrogen dissolving rods are a specialized material commonly used in various industries for the dissolution of hydrogen gas in liquids. The rods are made from high-quality stainless steel and designed to efficiently dissolve hydrogen gas into liquids, such as water, to produce high-purity hydrogen gas for use in a range of applications. TOPTITECh stainless steel diffusion stone is made of food-grade stainless steel material and can be used in many kinds of hydrogen water machines. Sintered integration does not fall off, and is anti-corrosion, heat-resistant, and anti-pressure. Compared with PE, stainless steel material is more durable and steady, with uniform porosity and high filtration. They can be utilized for high concentration hydrogen generators, portable home hydrogen absorption accessories, hydrogen machines, and other things. Parameters Material: Stainless steel Dimensions: 12*180mm Pore size: 20 microns Porosity: 30-50% Features High durability: Stainless steel hydrogen dissolving rods are highly durable and can withstand harsh operating conditions. Efficient hydrogen dissolution: The unique design of stainless steel hydrogen dissolving rods allows for the efficient dissolution of hydrogen gas into liquids, producing high-purity hydrogen gas for use in a range of applications. Corrosion resistance: Stainless steel is highly resistant to corrosion, which is important when working with hydrogen, as it is a highly reactive gas that can corrode many materials. This makes stainless steel a suitable material for use in hydrogen dissolution, as it can withstand harsh operating conditions and prevent corrosion. Easy to use: Stainless steel hydrogen dissolving rods are easy to use and require little maintenance, making them a cost-effective and reliable solution for hydrogen gas production.
TOPTITECh stainless steel diffusion stone is made of food-grade stainless steel material and can be used in many kinds of hydrogen water machines. Sintered integration does not fall off, and is anti-corrosion, heat-resistant, and anti-pressure. Compared with PE, stainless steel material is more durable and steady, with uniform porosity and high filtration. They can be utilized for high concentration hydrogen generators, portable home hydrogen absorption accessories, hydrogen machines, and other things. Parameters Material: Stainless steel Dimensions: 12*180mm Pore size: 20 microns Porosity: 30-50% Features High durability: Stainless steel hydrogen dissolving rods are highly durable and can withstand harsh operating conditions. Efficient hydrogen dissolution: The unique design of stainless steel hydrogen dissolving rods allows for the efficient dissolution of hydrogen gas into liquids, producing high-purity hydrogen gas for use in a range of applications. Corrosion resistance: Stainless steel is highly resistant to corrosion, which is important when working with hydrogen, as it is a highly reactive gas that can corrode many materials. This makes stainless steel a suitable material for use in hydrogen dissolution, as it can withstand harsh operating conditions and prevent corrosion. Easy to use: Stainless steel hydrogen dissolving rods are easy to use and require little maintenance, making them a cost-effective and reliable solution for hydrogen gas production. Applications Hydrogen production: Stainless steel hydrogen dissolving rods are commonly used in the production of high-purity hydrogen gas through the dissolution of hydrogen gas into water. This process is commonly used in the semiconductor, pharmaceutical, and medical industries, as well as in research laboratories. Water treatment: Stainless steel hydrogen dissolving rods are used in water treatment systems to produce high-purity hydrogen gas for use in a range of applications, such as wastewater treatment and disinfection. Chemical industry: Stainless steel hydrogen dissolving rods are used in the chemical industry to produce high-purity hydrogen gas for use in a range of chemical reactions and processes. Food and beverage industry: Stainless steel hydrogen dissolving rods are used in the food and beverage industry to produce high-purity hydrogen gas for use in a range of applications, such as food packaging and preservation. Renewable energy: Stainless steel hydrogen dissolving rods are used in renewable energy systems, such as fuel cells and hydrogen storage systems, to produce high-purity hydrogen gas for use in energy production. How does stainless steel hydrogen dissolving rods work? Hydrogen gas is introduced to the stainless steel hydrogen dissolving rod. The gas flows through the small channels or pores on the surface of the rod.
