The Aluminium panels produced by our company use 1100H24, 3003H24, 5005H24 single-layer Aluminium alloy board as baseplates, and the thickness varies from 1.0mm to 5.0mm. The metal panel consists of veneer, reinforcing rib and hanger. Thermal insulation mineral wool could be added on the back of the panel if required, and the hanger could be bent from veneer or be mounted on the veneer additionally.Light, good rigidity and good strength. Good abrasion resistance and good corrosivity resistance. Easy to process and free to process plane arch, spherical face and other complex geometry. Rich colors, good decorating effects. Difficult to be stained and easy to clean and maintain. Convenient and swift Installation and Construction. Retractable, environment friendly. Strong oversea wooden package.
1. Corrosivity Resistance The high fluorine content of surface fluorine-carbon spraying KYNAR500 resin can effectively resist the erosion of acid rain, air pollution and ultraviolet ray erosion. 2. Self Cleaning Because the special molecular structure of KYNAR500 in Fluorine-carbon coating rests no dust on the surface at all, it tends to be clean. 3. High Strength The high-quality, antirust Aluminium adopted is of high strength. The welding process on the openings greatly improves the stiffness of Aluminium panel and guarantees the resistance of curtain wall against wind. vibration, rainwater leaking, air invasion, thunder, shok and etc. 4. Product Characteristics The Aluminium panels produced by our company use 1100H24, 3003H24, 5005H24 single-layer Aluminium alloy board as baseplates, and the thickness varies from 1.0mm to 5.0mm. 5. The metal panel consists of veneer, reinforcing rib and hanger. Thermal insulation mineral wool could be added on the back of the panel if required, and the hanger could be bent from veneer or be mounted on the veneer additionally. 6. Advantages of Aluminium Curtain Wallboard Light, good rigidity and good strength. Good abrasion resistance and good corrosivity resistance. Easy to process and free to process plane arch, spherical face and other complex geometry. Rich colors, good decorating effects. Difficult to be stained and easy to clean and maintain. Convenient and swift Installation and Construction. Retractable, environment friendly. Strong export woodern boxes.
Products: Alubond/ Aluminum composite panel, Alubond, Aluminum Composite Materials, ACP Panel /ACM Material: 1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting. 2, Core: nontoxic polyethylene. low denisty 3, The back side: aluminum alloy sheet coated with polyester resin primar painting. Specification: 1, Standard size(widthxLength) : 1,220 x 2,440mm 2, Aluminum composite panel thickness:2, 3, 4, 5 mm. 3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm 4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested 5,Nonstandard sizes are available according to customer's requirements. Woooden pallet.
Material: 1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting. 2, Core: nontoxic polyethylene. low denisty 3, The back side: aluminum alloy sheet coated with polyester resin primar painting. Specification: 1, Standard size(widthxLength) : 1,220 x 2,440mm 2, Aluminum composite panel thickness:2, 3, 4, 5 mm. 3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm 4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested 5, Nonstandard sizes are available according to customer's requirements. Wooden pallet.
Products: Alubond/ Aluminum composite panel, Alubond, Aluminum Composite Materials, ACP Panel /ACM Material: 1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting. 2, Core: nontoxic polyethylene. low denisty 3, The back side: aluminum alloy sheet coated with polyester resin primar painting. Specification: 1, Standard size(widthxLength) : 1,220 x 2,440mm 2, Aluminum composite panel thickness:2, 3, 4, 5 mm. 3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm 4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested 5, Nonstandard sizes are available according to customer's requirements. Wooden pallet.
Thickness: 0.06, 0.08 , 0.1 mm-3.0 mm , 3.0 mm < thickness Width: 5.00mm-1000mm, 1219mm, 1250mm, 1500mm, 1524mm Grades: 430, 420, 410, 409, 317, 317l , 304, 304l, 316, 316l, 321, 310, 310h, 309, 630, 631, 347, 301, 202 , 201ect.
Seamless tube: Out diameter: ANSI 1/8"-24"(6mm-630mm). Wall thickness: ANSI 5S-160S (0.9mm-30mm). Welded pipe: Out diameter: (ANSI 8mm~1219mm) ,Wall thickness ANSI 0.3mm-25mm.
Material:SS304, SS316 Standard:DIN, ANSI, JIS, UNI, BS, GB, EN, ETC Type:slip-on.Blind, welding neck, threaded, flate, etc. In wooden case.
Material: SS304, SS316. Standard: ANSI, DIN, UNI, EN, JIS, GB, ETC Type:slip on, plate, blind, threaded, welding neck, and other special mode. In wodden case.
Material: SS304,SS316 Standard : ANSI,EN,DIN,JIS,GB,UNI,etc Type:slip-on flange, welding neck flange, blind flange, flate flange, threaded flange, and other special flanges. In wooden case.
Material:SS304, SS316 Standard : ANSI, DIN, UNI, JIS, GB, EN, BS Type:slip-on, welding neck, threaded, plate, etc . In wooden case.
Grade:201,202,304,430 Thickness: CR: 0.2mm to 2mm HR: 2.5,3mm Width: 600mm and below. Export standard packing.
Stainless steel seamless pipe fitting : ASME B16.9 B16.11 B16.28 ASTM A403 SH3408 SH3409 SH3410 JIS B2311 B2312 B2313 B2316 DIN2615 DIN2616 DIN2617.
* ASME/ANSI b16.5: Welding neck flange, slip-on flange, blind flange, high hub blind flange, socket weld flange. Lapjoint flange, threaded flange. Ring type joint flange. Pressure class: 150, 300, 400, 600, 900, 1500, 2500 * ASME/ANSI b16.47: Welding neck flange, blind flange. (series a & b) Pressure class: 75, 150, 300, 400, 600, 900 * ASME/ANSI b16.36: (orifice flanges) welding neck flange, slipon flange, threaded flange. Pressure class: 300, 400, 600, 900, 1500, 2500 * ASTM/ANSI b16.48: ( figure-8 blanks) Pressure class: 150, 300, 400, 600, 900, 1500, 2500 * MSS SP44: Welding neck flange, blind flange. Pressure class: 300, 400, 600, 900 * API 6A: Welding neck flange, thread flange, blind flange. Pressure: 2000psi, 3000psi, 5000psi, 10000psi, 15000psi, 20000psi, 25000psi.
* ASME/ANSI B16.5: Welding neck flange, slip-on flange, blind flange, high hub blind flange, socket weld flange. Lapjoint flange, threaded flange. Ring type joint flange. Pressure class: 150, 300, 400, 600, 900, 1500, 2500 * ASME/ANSI B16.47: Welding neck flange, blind flange. (series A & B) Pressure class: 75, 150, 300, 400, 600, 900 * ASME/ANSI B16.36: (orifice flanges) welding neck flange, slipon flange, threaded flange. Pressure class: 300, 400, 600, 900, 1500, 2500 * ASTM/ANSI B16.48: ( figure-8 blanks) Pressure class: 150, 300, 400, 600, 900, 1500, 2500 * MSS SP44: Welding neck flange, blind flange. Pressure class: 300, 400, 600, 900 * API 6A: Welding neck flange, thread flange, blind flange. Pressure: 2000PSI, 3000PSI, 5000PSI, 10000PSI, 15000PSI, 20000PSI, 25000PSI.
This side seal cutting bag machine adopts micro-computer technology to display operation instructions on a touch screen. It also features photo-electric tracking, fixed length setting, accurate position stopping, and high speed bag production. Included with this machine is also an automated counter alarm. (L x W x H) 165 x 58 x 82.
Stainless steel finish sheet, no. 4 satin finish, hairline finish, no. 8 mirror finish.
Available thickness: 0.3~3.0mm Available finish: 180, 240, 320, 400, 600 Grit Standard: ASTM A-554.
Available thickness: 0.3~3.0mm Available finish: 180, 240, 320, 400, 600 grit Standard: ASTM A-554.
Stainless steel sheets & plates & coils: a) Standards: ASTM / ASME, DIN, JIS,SUS b) Grade: 300, 400 Series ;304,316L/, 317/L, 321/H, 309S, 310S, 347/H, S31803, 904L.17-4PH and 430/409L/410/410S etc c) Surface Treatment:2B, 2D, BA, NO.1 super mirror; satin(No4); Hairline(HL); Etching Patterns; Vibration; Bead Blast; PVD Coating; N.S.P.(Non Stain Processing);SB surface ;#400(NO.7);Embossment ,chequered sheet d) Thickness: 0.3-80mm e) Width: 1000-2000mm. as per the clients' requirement.
