Launch X431 Pro Mini with Bluetooth/wifi Full ECU Diagnostic Tool Actuation Tester
Descriptions:
X-431 pro mini is a car fault diagnostic device based on Android 5.1 system.
It have many advantages such as wide coverage of special functions and car models .It can accurate test data, realize full car model and system fault diagnosis. It combines mobile internet application advantages and able to share Launch's a large number of maintenance data and case library.
X-431 pro mini achieves full car model and full system vehicle trouble diagnosis, which includes reading DTCs, clearing DTCs, reading data stream, actuation Test,
special Functions and matching Engine system , steering system , SRS system , Security system , Air conditions system , brake system , battery system,
EPB system,TPMS system,Chassis system,ABS system,transmission system ...
Special Functions:
Launch X-431 PRO MINI can program and code the electronic control system of prevailing vehicle models, also perform special functions, such as:
1.Oil Reset Service
2.Steering Angle Calibration
3.Electronic Parking Brake Reset
4.Battery Register / Battery Maintenance
5.ABS Bleeding
6.Electronic Throttle Position Reset / Learn
7.Diesel Particulate Filter (DPF) Regeneration
8.Tire Pressure Monitor System Reset
9.Gear Learning
10.Immobilizer Matching
11.Fuel Injector Coding
Specification:
Launch CR3001 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
*Support Full OBD2 functions,checking engine as follows:
1.Reading Codes: show the detailed description of the diagnostic Trouble Code (DTCs).
2.Erasing Codes & Reset: turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream: reads and displays live ECU/PCM data stream, plot functions graphically and stores freeze frame data.
4.I/M readiness status: Shows whether the various emissions-related systems on the vehicle are operating properly
and are ready for inspection and maintenance testing.
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View freeze frame data: Check the certain vehicle conditions which are recorded by the on-board computer
when the emission-related fault occurs.
7.O2 sensor test: allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests
from the vehicles on-board computer.
8.On-board monitor test: retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: display the information such as VIN (Vehicle Identification Number),
CID (Calibration ID) and CVN (Calibration verification number),etc.
10.Component Test: certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Launch X431 V+ diagnostic tool auto scanner ECU code reader
Launch X431 V plus is tablet with diagnostic softwares, the update version of X431 V.
which also can be used for Launch HD module to test heavy trucks.As an extra function, you have better contact us for instruction.
It is a globle version without IP limit, can use it anywhere in the world.
Support Language:
English,French Italian, German, Japanese, Russian, Spanish, Portuguese, Polish, Turkey, Dutch, Greek,Hungarian, Arabic, Denish, Korean, Farsi, Romanian, Serbian, Finish, Swedish, Czech.
1.ECU Coding and Auto VIN Tech
This diagnostic tablet supports ECU coding function for Benz/Ford and so on, which also with a quick diagnosis function via one-button VIN scanning.
2.Active Test
The active test function able to access vehicle-specific subsystem and component tests. Available for searching by manufacturer, year, and model in the menu.
3.All System Diagnosis
This tablet able to read DTCs and data streams for all systems to diagnose car comprehensively including fuel system, emission system, transmission, engine, body, powertrain and so on.
Function:
1.Oil Reset Service
Clear the oil light, perform reset for the engine oil life system;
2.Steering Angle Calibration
Perform steering angle adjustment, clear steering sensor fault memory and turn off steering wheel warning light.
3.Electronic Parking Brake Reset
Reset the brake pad after repairs in electronic parking brake system are done.
4.Battery Register & Battery Maintenance
Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information
and prevent the related control module from detecting false information.
Launch X431 Diagun IV Diagnostic Tool WIFI Bluetooth X-431 Universal Programmer
Specification:
Diagun IV is a vehicle diagnostic tool , with a quad-core 1.1 GHz processor ,and a 5.5 inch capatitive screen.
X431 Diagun IV delivers diagnostic functionality which helps to diagnose vehicles issues more efficiently.
In addition ,Diagun IV Diagnostic support Wifi Bluetooth connection , one-click update, diagnostic feedback and all kinds of service function.
Diagun IV full system diagnosis:
Diagun IV able to diagnose the electronic control system of prevailing vehicle models including Asian,European, American and China.
Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Support: ABS systemï¼?Engine system , SAS system , TPMS system , IMMO system , Battery system ,Oil service system , SRS system , ect...
Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Actuation Test , ECU coding and 11 Special Function ect...
Place of Origin: Wuxi, China
Brand Name: SSKKSS
Warranty: 12 Months
Certification: ISO9001
Car Model: Ford F-250 E-350 F-350
Engine Code: Power stroke
Size: 13.5kg
Part Number: 466057-0005
Engine: Power stroke
Model: TP3801
Manufacturer: SSKKSS
Payment: T/T/Paypal
Package: Neutral Carton/SSKKSS pakcing
Model Number: TP38
Type: Turbocharger
Car Make: Ford F-250 E-350 F-350 Truck
Place of Origin: WuXi, China
OE NO.: 1831452C91
Part NO.: 702012-0010
Warranty: 12 Months
Place of Origin: WuXi, China
Brand Name: SSKKSS
Size: 15kg
Part Number: 702012-0010
Displacement: 7.3L, V8
Year: 1991-2003
Power: 205 Kw
Application: Ford F-Series F250 350 7.3L Turbo
Type: Turbocharger
Car Make: Ford Powerstroke 99-03
Model Number: GTP38
Meet IEC 62196-2 (Mennekes, Type 2) EU European standard
Nice shape and easy to use, protection class IP66 (in mated conditions)
Product Feature
Product Feature
Automatic resumption of the charging process
For normal EV Charging Box, it is switched off after an error or power failure and must be reactivated manually. Therefore, when overnight charging is planned, the battery could still be empty the following morning.
But this is not the case with the BS-PCD020. The BS-PCD020 permanently tests the infrastructure-related voltage. If there is still any current at the wall socket, the BS-PCD020 initiates a test sequence, establishes communication with the vehicle and ensures a safe recharging of the vehicle battery.
Comprehensive protection system
We designed all kinds of protective measures for BS-PCD020: Overcurrent protection, Overvoltage protection, Llightning protection, Electric leakage protection, and Short circuit protection. This is a deceive which can ensure the safety using for everyone.
Working current adjustable
People can choose the suitable working current between 10A and 16A with the press button on the box
The intelligent BS-PCD020 also detects faulty wiring of the infrastructure-side socket and, in
Slender, practical and robust
Mode 2 charging cables never fail to convince with their appealing design. Thanks to the new enclosure format, the charging cable with integrated BS-PCD020 can be easily and compactly rolled up, since both bushes are fed out of the enclosure at an angle. Thus the charging cable requires less storage space.
The stable enclosure can be driven over by a car just like the charging connector and passes the test with a wheel load of 500kg. In practice the enclosure is exposed to more intensive environmental influences than plugs and connectors.
In day-to-day use, it is not out of the question for the enclosure to lie on the ground, covered in dirt, or even to be left in a puddle.
.
CAUTION:
1. Don't submerge the ev charging box in water.
2. Don't step on, fold or knot the cable.
3. Don't drop the EV charging box or place a heavy object on it.
4. Don't place the charging cable near high temperature object when charging.
5. Don't operate the EVSE in temperatures beyond its operating range of
6. Power-supply side input cable should be at least 3*2.5mm (recommended 3*4mm), with a standard 16A scoket. It is suggested taht the power distribution is done by the professionals.
WARNINGS:
1. Don't put fingers into the charging connector when the power plug is still connecting to the power.
2. Don't use this ev charging box when the cable is damaged.
3. The ev charging box is only for ev charging using.
4. Don't use this device with an extension cord or adaptor.
Product Specification/Models
Item: PCD-019 (10A/16A Adjustable IEC 62196-2)
IEC 62196-2 Standard (Mostly used in Europe);
Current: 10A/16A adjustable;
Voltage Range: 220V ¨¤ 10%;
Maximum power: 2.2KW / 4KW;
Auto charge recovery: Yes;
Over current protection: Yes;
16amp Cable 3G2.5 + 2 x 0.75mm;
10, 000 Mating Cycles;
Cable Strain Relief Feature Insulated Terminal Design;
Lights-indicates charging status;
IP66;
Operating Temperatures: 30
Cord Length: 18 Feet
Warranty: 1 Years;
Smooth line design;
Application
Apply to Vehicle
Audi A3 e-Tron, BMW i3, BMW i8, Chevrolet Spark, Mercedes B Class E-Celi, Mercedes S500 PHEV, Mercedes SLS EV, Mercedes Vito E-Cell Van, Porsche Panamera S PHEV, Renault Zoe, Renault Zoe 2013, Volkswagen e-Up,Volkswagen e-Golf, Volvo V60 PHEV..
Meet SAE J1772 (Type 1) North American standard
Nice shape and easy to use, protection class IP66 (in mated conditions)
Product Feature
Product Feature
Automatic resumption of the charging process
For normal EV Charging Box, it is switched off after an error or power failure and must be reactivated manually. Therefore, when overnight charging is planned, the battery could still be empty the following morning.
But this is not the case with the BS-PCD020. The BS-PCD020 permanently tests the infrastructure-related voltage. If there is still any current at the wall socket, the BS-PCD020 initiates a test sequence, establishes communication with the vehicle and ensures a safe recharging of the vehicle battery.
Comprehensive protection system
We designed all kinds of protective measures for BS-PCD020: Overcurrent protection, Overvoltage protection, Llightning protection, Electric leakage protection, and Short circuit protection. This is a deceive which can ensure the safety using for everyone.
Detecting faulty wiring
The intelligent BS-PCD020 also detects faulty wiring of the infrastructure-side socket and, in addition, controls the incoming protective conductor before charging begins.
Working Current Adjustableg
People can choose the suitable working current between 10A and 16A with the press button on the box
Slender, practical and robust
Mode 2 charging cables never fail to convince with their appealing design. Thanks to the new enclosure format, the charging cable with integrated BS-PCD020 can be easily and compactly rolled up, since both bushes are fed out of the enclosure at an angle. Thus the charging cable requires less storage space.
The stable enclosure can be driven over by a car just like the charging connector and passes the test with a wheel load of 500kg. In practice the enclosure is exposed to more intensive environmental influences than plugs and connectors.
In day-to-day use, it is not out of the question for the enclosure to lie on the ground, covered in dirt, or even to be left in a puddle.
.
CAUTION:
1. Don't submerge the ev charging box in water.
2. Don't step on, fold or knot the cable.
3. Don't drop the EV charging box or place a heavy object on it.
4. Don't place the charging cable near high temperature object when charging.
5. Don't operate the EVSE in temperatures beyond its operating range of -25
6. Power-supply side input cable should be at least 3*2.5mm (recommended 3*4mm), with a standard 16A scoket. It is suggested taht the power distribution is done by the professionals.
WARNINGS:
1. Don't put fingers into the charging connector when the power plug is still connecting to the power.
2. Don't use this ev charging box when the cable is damaged.
3. The ev charging box is only for ev charging using.
4. Don't use this device with an extension cord or adaptor.
Product Specification/Models
Item: PCD-020 ( 10A/16A Adjustable SAE J1772 )
IEC 62196-2 Standard (Mostly used in Europe and US);
Current: 10A/16A adjustable;
Voltage Range: 220V¤ 10%;
Maximum power: 2.2KW / 4KW;
Auto charge recovery: Yes;
Over current protection: Yes;
16amp Cable 3G2.5 + 2 x 0.75mm;
10, 000 Mating Cycles;
Cable Strain Relief Feature Insulated Terminal Design;
Lights-indicates charging status;
IP66;
Operating Temperatures: -30
Cord Length: 18 Feet
Warranty: 1 Years;
Smooth line design;
Application
Apply to Vehicle
Chevrolet Volt, Citroen C-Zero, Fisker Karma, Ford Focus Electric, Ford C-Max Energi, Mia, Mia Electric Van, Mitsubishi-I Miev, Mitsubishi Outlander Phev, Nissan NV200 SE Van, Nissan Leaf, Peugeot Ion, Renault Fluence, Renault Kangoo, Smiths Edison Van, Smiths Newton, Tata Indica Vista EV, Toyota Prius, Vauxhall Ampera.
