A Kee Klamp is a structural pipe fitting commonly used in the construction of handrails and barriers. Fabricated installations comprise the fittings and separate tubing components, which can be sized on site
A Kee Klamp is a structural pipe fitting commonly used in the construction of handrails and barriers. Fabricated installations comprise the fittings and separate tubing components, which can be sized on site
All the raw material from China big steel mills, are unused steel products spare material and leftover material , no oil, no protective film, no impurities, which are high quality raw material for intermediate frequency furnace, 20 and 30 kg of small packaging are more suitable for small intermedium frequency furnace,and it can be directly converted into molten steel. We can provide the list and data of each transaction tested by NITON or Olympus spectral analyzer, and guarantee the detection rate of the product to be 100%
All the raw material from China big steel mills, are unused steel products spare material and leftover material , no oil, no protective film, no impurities, which are high quality raw material for intermediate frequency furnace, 20 and 30 kg of small packaging are more suitable for small intermedium frequency furnace,and it can be directly converted into molten steel. We can provide the list and data of each transaction tested by NITON or Olympus spectral analyzer, and guarantee the detection rate of the product to be 100%
Commodity: Used Rail Second Quality Origin: Saudi Arabia Contract Quantity: 2,100,000 Metric Tons (MT) Provided Length: 1.00-1.50 Metres Loading Port: Jeddah or ASSAP Delivery Port: CIF ASWP SPECIFICATION & COMPOSITION R50 (51.67 Kg/m) Free size length â?? GOST 7173-75 R65 (64.72 Kg/m) Free size length â?? GOST 8165-75 Composition: C: 0.54-0.82%, SI: 0.18-0.40%, Mn: 0.60-1.50, S: 0.04 Max, P: 0.035% Max
Stainless steel pipe is primarily used in piping systems for the transport of fluids or gases. We manufacture steel pipe from a steel alloy containing nickel as well as chromium, which give stainless steel its corrosion-resistant properties.
Steel coil- a finished steel product such as sheet or strip which has been wound or coiled after rolling. ... Hot-rolled coil is produced from semi-finished products , which are reduced to certain thicknesses by rolling and annealing and wound into a roll.
We are one of the leading manufacturers & exporters of threaded flanges, threaded pipe flanges and stainless steel threaded flanges. These special type of flange is generally used for high pressure, yet smaller diameter applications. Their key feature is that these flanges can be assembled without welding. Threaded Flanges can be used in extremely high pressure services, thus proving impeccable working capacities. Our threaded flanges, threaded pipe flanges and stainless steel threaded flanges can be customized as per the client's requirement.
We are offering the casting parts which made from the process of lost wax casting. Our capabilities for the manufacturing are starting from 10 Grams to 45 Kilograms with any kind of shapes. The related industries whom it works are Valves, Hardware, Defense, Pumps, Automobile, Pipe Fittings, Etc. Chemical Composition Carbon (C) : 0.00 0.08% Silicon (Si) : 0.00 1.50% Manganese (Mn) : 0.00 1.50% Phosphorus (P) : 0.00 0.045% Sulphur (S) : 0.00 0.045% Chromium (Cr) : 18.00 21.00% Molybdenum (Mo) : 0.00 0.50% Nickel (Ni) : 8.00 12.00% Copper (Cu) : 0.00 0.50% The prices are been confirm after the reviewing of drawing of the parts.
We are an aluminum reprocessing plant producing 80mt of Aluminium Auto casting Trump on daily basis. When we buy the Auto casting Engines and blocks as raw material. As a process, we have to sort out Magnesium casting from the material, shred only aluminum Autocasting, and export it to Auto cast manufacturer in Korea, Japan, and India. Any aluminum casting in the magnesium stockpile is our loss. Thus teams are trained and specially instructed to take out only those castings which they are 100% sure of magnesium castings at the time of manual offloading of our delivery vehicles. If they have any doubt about 1 % between mg and aluminum casting, that piece results in our Aluminium stockpile. So Aluminium is our main product and Mg casting is our by-product. We only process, shred, and clean Magnesium Casting before filling the container to reduce the size and accommodate maximum loading. Attached are the latest pictures of Our Mg Stock. Yes, we export Mg Scrap to Brazil and the US. If you share your Whatsapp Mobile Number, I will share past loading pictures stored on my phone to you also. We have been exporting it for the last 2 years and have never received any composition issues as we have a streamlined process.
Buyer of Electric Motor Scrap, Compressors, Insulated wires and Aluminum Foil Paper scrap
Steel Type Material Type 304 Bundled/ Stripe 321 Bundled/ Stripe 304L Bundled/ Stripe 316L Bundled/ Stripe 410/409L Bundled 430 Bundled 201 Bundled/ Stripe 2205 Bundled/ Stripe 310S Bundled
Steel And Cast Iron Scrap Cast iron alloy scrap price 270 Euro exw
Reinforcement Bracket - Aircraft
Precision casting processes cast steel with high dimensional accuracy. The general linear tolerance is 1%, the angle tolerance is: �±1/2 degrees, and the surface finish can reach Ra 1.6-3.2, which can save material and machining costs. It can produce parts with complex shapes, or cast multiple parts into one, eliminating assembly or welding work. Exquisite text or LOGO patterns can be cast on the surface of the product to enhance the product image. The casting material has a wide range of properties, heat resistance, wear resistance, corrosion resistance, and the material hardness can reach HRC15-60 to meet the needs of various working conditions. Casting production batch. The quantity is flexible, from small quantities to mass production, high efficiency, good repeatability; low mold costs, low initial investment in product development. Most of the large steel castings are the main load-bearing parts and support parts of major technical equipment. The castings are of huge size, complicated shape, and the thickness of the section is very different. Such castings are often in high temperature and high pressure working conditions, and their performance and quality requirements are very strict, especially More stringent requirements for high temperature performance. ã??ã?? Steel castings should be used after heat treatment. Because there are casting defects such as pores, cracks, shrinkage holes and shrinkage porosity, coarse grains, uneven structure and residual internal stress in the steel castings in the as-cast state, the strength, especially the plasticity and toughness of the steel castings are greatly reduced.
Clean debris free aluminum scrap from can beverages Packaging compressed stacks of one 1 metric ton Shipping method will be in 20ft or 40ft (not OT) container Location is from the port of Malabo
Synth tube pipe for split flow pump
Product Description : Aircraft Engines Parts
Product Description : Aircraft Engines Parts
Length: 50 mm Diameter: 1,40 mm Aspect ratio: 36 Packing: 25 kg paper bags
