Inconel Alloy 725 (UNS N07725) is a nickel chromium molybdenum niobium alloy with high corrosion resistance and age hardening to very high strength. Its composition is similar to Inconel 625 alloy. Inconel 625 is an alloy widely used in various corrosive environments. Its strength can be improved by cold work hardening and has been used for small bolts. Inconel 725 alloy basically has the same corrosion resistance as Inconel 625 alloy, but Inconel 725 alloy is an alloy that is age-strengthened by a heat treatment process. Since the stress of Inconel 725 alloy is through heat treatment instead of cold working, the plasticity and toughness are still high, and it is suitable for making high-strength, high-corrosion-resistant parts.
Here are the common national standard designations of Inconel 725:
US standard designations: UNS N07725, AMS 5660, AMS 5832, AMS 5772, AMS 5796, AMS 5581, ASTM B805, ASTM B805, ASTM B805. European standard designations: EN 2.4668, EN 10269, EN 10272, EN 10216-5, EN 10250-4, EN 10263-4, EN 10297-2, EN 10302, EN 10312, EN 12266-1, EN 12560-6, EN 13480-3, EN 13480-5, EN 13544-2, EN 1592-4. German standard designations: DIN NiCr22Mo9Nb, DIN 2.4627, DIN 17742, DIN 17744, DIN 17752, DIN 17754, DIN 17751. Japanese standard designations: JIS NCF725, JIS G4902, JIS G4941, JIS G5502, JIS G5122. Chinese standard designations: GB/T UNS N07725, GB/T 14992, GB/T 15001, GB/T 15003, GB/T 15004, GB/T 21833.
We can provide the following the form:Inconel725 alloy coil; Inconel725 alloy strip;Inconel725 alloy plate; Inconel725 alloy sheets; Inconel725 alloy tube; Inconel725 alloy pipe;
Inconel725 alloy flat; Inconel725 alloy bar
Used for pipe fittings, joints and bearings in acid-resistant equipment. It is also widely used in marine ship equipment;
GB:00Cr21Ni57Mo8Nb5TiA1;JIS:NCF725;UNS:N07725;W.Nr 2.4668
Inconel 600 alloy is a nickel-chromium-iron-based solid-solution strengthened alloy, which has good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding performance, and has satisfactory thermal strength and high plasticity below 700 �°C
Here is the translation of the previous answer:
The following are the national standard grades and specifications for Inconel 600:
United States standard grade: UNS N06600
Specifications:
AMS 5540: Seamless and welded nickel alloy plate, sheet, and strip with good oxidation and high-temperature creep properties at 800�°F (427�°C).
ASTM B166: Standard specification for nickel-chromium-iron alloys, seamless and welded rod, bar, and wire.
ASME SB-166: Same as above.
European standard grade: NiCr15Fe (2.4816)
Specifications:
EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat-resisting steel and hot finished structural hollow sections.
EN 10002-1: Method of tensile testing of metals.
EN 10002-5: Method of compressive testing of metallic materials.
Japanese standard grade: NCF 600
Specifications:
JIS G4902: Standard specification for seamless and welded nickel alloy pipes and tubes.
JIS G4903: Standard specification for seamless and welded nickel alloy pipes and tubes.
Chinese standard grade: GH3600
Specifications:
GB/T 14992: Standard specification for seamless and welded nickel alloy tubes and pipes.
GB/T 14995: Standard specification for nickel alloy forgings.
GB/T 12771: Standard specification for seamless and welded steel pipes for hydraulic transmission.
These specifications define the chemical composition, physical properties, processing, and testing requirements of Inconel 600 materials to ensure their quality and performance meet the standards.
We can provide the following the form:Inconel600 alloy coil; Inconel600 alloy strip;Inconel600 alloy plate; Inconel600 alloy sheets; inconel600 alloy tube; Inconel600 alloy pipe;
Inconel600 alloy flat; Inconel600 alloy bar
Alloy 690 has excellent resistance to intergranular corrosion and intergranular stress corrosion cracking, and is mainly used as a heat transfer tube material for steam generators in pressurized water reactor nuclear power plants. The material of the steam generator heat transfer tube of the pressurized water reactor nuclear power plant has undergone a development process, including 304 austenitic stainless steel, 600 alloy, 800 alloy and 690 alloy. In-service corrosion failures of Alloy 600 show that intergranular corrosion and intergranular stress corrosion cracking are the main problems. Alloy 690 as Heat Transfer Tube Material of Steam Generator in Pressurized Water Reactor Nuclear Power Plant.
Inconel 690 is a high-temperature alloy, also known as UNS N06690. Some international standards and specifications for Inconel 690 include:
American standards: ASTM B166, ASTM B564, ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B514, ASTM B751, ASTM B670, ASTM B366, ASME SB-166, ASME SB-564, ASME SB-167, ASME SB-829, ASME SB-517, ASME SB-775, ASME SB-163, ASME SB-514, ASME SB-751, ASME SB-670, ASME SB-366
European standards: EN 2.4642, EN 2.4641, EN 2.4856, EN 2.4858, EN 2.4859, EN 10216-2, EN 10217-2, EN 10216-5, EN 10217-5, EN 10088-1, EN 10095, EN 10222-2, EN 10269, EN 10272, EN 10297-2, EN 10302, EN 10312
Japanese standards: JIS G4801, JIS G4804, JIS G4805, JIS G4802, JIS G4311, JIS G4312, JIS G4313, JIS G4321, JIS G4322, JIS G4323, JIS G4308, JIS G4318, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G3446
Chinese standards: GB/T 14992, GB/T 14994, GB/T 15001, GB/T 15003, GB/T 15007, GB/T 15009, GB/T 15011, GB/T 15013, GB/T 15014, GB/T 15021, GB/T 15023, GB/T 15025, GB/T 15027, GB/T 15029, GB/T 15031, GB/T 15033, GB/T 15037, GB/T 15039, GB/T 15041, GB/T 15043, GB/T 15045, GB/T 15047, GB/T 15049, GB/T 15051, GB/T 15053, GB/T 15055, GB/T 15057, GB/T 15059, GB/T 15061, GB/T 15063, GB/T 15065, GB/T 15067, GB/T 15069, GB/T 15071, GB/T 15073, GB/T 15075, GB/T 15077, GB/T 15079, GB/T 15081, GB/T 15083, GB/T 15085, GB/T 15087, GB/T 15089, GB/T 15091, GB/T 15093, GB/T 15095, GB/T 15097, GB/T 15099, GB/T 15101, GB/T 15103, GB/T 15105, GB/T 15107, GB/T 15109, GB/T 15111, GB/T 15113, GB/T 15115, GB/T 15117, GB/T 15119, GB/T 15121.
We can provide the following the form:Inconel690 alloy coil; Inconel690 alloy strip;Inconel690 alloy plate; Inconel690 alloy sheets;
Inconel690 alloy tube; Inconel690 alloy pipe;Inconel690 alloy flat; Inconel690 alloy bar
Inconel 617 is a mixture of nickel, chromium, cobalt and molybdenum, high levels of nickel (44.5% minimum) and chromium (20-24%) give this alloy good resistance to reducing and oxidizing media. Cobalt (10-15%) and molybdenum (8-10%) combine to strengthen the solid solution. A small amount of aluminum (0.8-1.5%) is also included and works with chromium to provide good resistance to oxidation at high temperatures. One of the alloy's key properties is that it maintains high levels of strength even at elevated temperatures without compromising its corrosion resistance. The material is also very functional, as it can be easily formed and welded using traditional techniques.
Here are the standard grade and execution standards for Inconel 617 in various countries:
American standard grade: UNS N06617 Execution standards: AMS 5887: Melting material for nickel-based high-temperature alloys. AMS 5888: Inconel 617 plates, sheets, and strips produced by hot rolling, cold drawing, and hot forming. AMS 5889: Seamless and welded Inconel 617 tubes. AMS 5608: Inconel 617 bars and shapes. ASTM B166: Standard specification for nickel and nickel alloy rod, bar, wire, and strip. ASME SB-166: Same as above.
European standard grade: NiCr22Co12Mo9 (2.4663) Execution standards: EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat resisting steel and technical conditions for the delivery of heat resisting alloys. EN 10269: Technical delivery conditions for high temperature and corrosion resistant steels. EN 10204: Standard specification for metallic products - types, batch numbers and grade certificates. EN 10302: Technical delivery conditions for nickel alloy bars, hot rolled, forged, and cold worked.
Japanese standard grade: NCF 617 Execution standards: JIS G4902: Standard specification for seamless and welded nickel alloy pipes. JIS G4903: Standard specification for seamless and welded nickel alloy pipes.
Chinese standard grade: GH617 Execution standards: GB/T 14992: Standard specification for seamless and welded nickel alloy pipes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel pipes and welded steel pipes for hydraulic transmission.
These execution standards specify the technical requirements for Inconel 617 material such as chemical composition, physical properties, processing, and testing requirements, ensuring its quality and performance meet the specified standards.
We can provide the following the form:Inconel617 alloy coil; Inconel617 alloy strip;Inconel617alloy plate; Inconel617 alloy sheets; Inconel617alloy tube; Inconel617 alloy pipe;Inconel617 alloy flat; Inconel617 alloy bar
Inconel 622 is a nickel-based superalloy composed of nickel, molybdenum, cobalt, tungsten and other elements. The nickel content is about 60%. It is a general-purpose Ni-Cr-Mo-W alloy with overall corrosion resistance superior to other existing Ni-Cr-Mo alloys, including Hastelloy C-276, C4 alloy, and 625 alloy. Inconel622 has good resistance to pitting corrosion, crevice corrosion and stress corrosion cracking. It has excellent oxidation resistance in aqueous media, including wet chlorine, nitric acid or mixed acids containing chloride ions.
Standard grades and specifications for Inconel 622:
US standard grade: UNS N06622 Specifications:
AMS 5540: Inconel 622 plates, sheets, and strips produced by hot rolling, cold drawing, and hot forming. AMS 5713: Inconel 622 bars and profiles. AMS 5714: Inconel 622 seamless and welded tubes. ASTM B168: Standard specification for nickel-chromium-iron alloys (UNS N066xx) plate, sheet, and strip. ASME SB-168: Same as above.
European standard grade: NiCr21Mo14W (2.4856) Specifications:
EN 10095: Technical delivery conditions for hot rolled and forged stainless steels and heat-resisting materials. EN 10269: Technical delivery conditions for steel alloys intended for use in high temperature and corrosive environments. EN 10204: Standard specification for type, batch, and quality certificates for metal products. EN 10302: Technical delivery conditions for hot rolled, forged, and cold worked nickel alloy bars.
Japanese standard grade: NCF 622 Specifications:
JIS G4902: Standard specification for seamless and welded nickel alloy tubes. JIS G4903: Standard specification for seamless and welded nickel alloy tubes.
Chinese standard grade: GH3622 Specifications:
GB/T 14992: Standard specification for seamless and welded nickel alloy tubes. GB/T 14995: Standard specification for hot rolled, forged, and cold worked nickel alloy plates, sheets, and strips. GB/T 14996: Standard specification for nickel alloy bars and profiles.
These specifications define the technical requirements for the chemical composition, physical properties, processing, and testing of Inconel 622 material to ensure its quality and performance meet the specified standards.
We can provide the following the form:Inconel622 alloy coil; Inconel622 alloy strip;Inconel622alloy plate; Inconel622 alloy sheets; Inconel622alloy tube; Inconel622 alloy pipe;Inconel622 alloy flat; Inconel622 alloy bar
Inconel722 is an alloy composed of nickel as the base and other elements. It is a kind of nickel-chromium alloy, nickel-iron alloy, nickel-copper alloy and nickel-molybdenum alloy. Nickel has good mechanical, physical and chemical properties, adding appropriate elements can improve its oxidation resistance, corrosion resistance, high temperature strength and improve some physical properties. It has excellent corrosion resistance and oxidation resistance, has good tensile properties and fatigue properties from low temperature to 980 �°C, and is resistant to stress corrosion in salt spray atmosphere.
Here are the standard grades and specifications for Inconel 722:
American standard grade: UNS N07722 Specifications:
AMS 5541: Standard specification for hot-rolled Inconel 722 plate, sheet, and strip. AMS 5714: Standard specification for Inconel 722 bars and forgings. ASTM B637: Standard specification for nickel alloy bars and forgings. ASME SB-637: Same as above. European standard grade: NiCr21Mo14W (2.4858) Specifications:
EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat-resisting steel and heat-resisting steel materials. EN 10269: Technical delivery conditions for high-temperature and corrosive environments. EN 10204: Standard specification for type, batch, and grade certificates for metal products. EN 10302: Technical delivery conditions for hot-rolled, forged, and cold-drawn nickel alloy bars. Japanese standard grade: - Specifications: JIS G4902, JIS G4903 Chinese standard grade: GH4220 Specifications:
GB/T 14992: Standard specification for seamless and welded nickel alloy tubes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel tubes and welded steel tubes for hydraulic transmission.
These specifications define the chemical composition, physical properties, processing, and testing requirements for Inconel 722 materials to ensure that their quality and performance meet the requirements.
We can provide the following the form:Inconel722 alloy coil; Inconel722 alloy strip;Inconel722alloy plate; Inconel722 alloy sheets; Inconel722alloy tube; Inconel722 alloy pipe;Inconel722 alloy flat; Inconel722 alloy bar
EN:NiCr21Mo14W;JIS:G4902;UNS:N07722;W.Nr:2.4858
1. Heat treatment industry. Such as furnace rollers, bell furnaces and annealing furnaces.
2. Calciner. For example, it can be used to calcinate high-performance corundum, calcinate chromite to produce ferrochrome alloy, and recover nickel used as a catalyst in petrochemical industry.
3. Chemical industry and petrochemical industry, use it to prepare new steam cracking naphtha furnace to produce hydrogen, etc.
4. Automatic device. Such as catalytic support system, spark plug.
5. Cleaning equipment for nuclear industry, such as nuclear waste removal.
6. Steel industry. Such as direct reduction of iron ore process to produce sponge titanium
Inconel 686 is suitable for use in amphoteric acids or amphoteric mixed acids, especially in corrosive environments containing high concentrations of chloride ions in amphoteric mixed acids. It has excellent resistance to uniform corrosion, electrochemical corrosion, localized corrosion and hydrogen embrittlement in seawater, and seawater has little effect on its fatigue strength. Therefore, Inconel686 alloy is an ideal material for marine environment applications, such as fasteners in seawater. The yield strength after cold working strengthening can be as high as 150ksi (1000MPa), and it has the same corrosion resistance as the solid solution state. Inconel 686 alloy is used in corrosive environments such as chemical process, pollution control (flue gas desulfurization), papermaking, pharmaceutical and garbage disposal. Inconel686 welding material is an ideal corrosion-resistant material for surfacing of steel.
Here are the international standard designations and specifications for Inconel 686:
American standard designation: UNS N06686, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B446, ASTM B462, ASTM B564, ASTM B166, ASTM B462, ASTM B472, ASTM B626, ASTM B408, ASTM B473, ASTM B444, ASTM B729, ASTM B677, ASTM B622, ASTM B829, ASTM B366.
German standard designation: W.Nr. 2.4606, Specifications: DIN 17744, DIN 17750, DIN 17752, DIN 17754.
Japanese standard designation: JIS NW686, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907.
Chinese standard designation: GH686, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012.
We can provide the following the form:Inconel686 alloy coil; Inconel686 alloy strip;Inconel686 alloy plate; Inconel686 alloy sheets; Inconel686 alloy tube; Inconel686 alloy pipe;
Inconel686 alloy flat; Inconel686 alloy bar
DIN:17744;JIS:NW686;UNS:N06686;W.Nr:2.4606
Mainly include chemical treatment, pollution prevention and control, pulp and paper, industrial waste and domestic waste treatment. Chemical processing includes heat exchangers, reactors, evaporators and transfer piping. Air pollution prevention includes chimney linings, pipes, furnace doors, scrubbers, flue gas reheaters, propellers, housings
Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest amount, the widest application and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. At the same time, it is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance.
The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in seawater.
â?² Acid medium: M400 is corrosion-resistant in sulfuric acid with a concentration of less than 85%. M400 is one of the very few important materials in durable hydrofluoric acid.
â?² Water corrosion: M400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.25mm/a.
â?² High temperature corrosion: The maximum temperature of M400 continuous work in the air is generally around 600�°C, and in high temperature steam, the corrosion rate is less than 0.026mm/a.
â?² Ammonia: Due to the high nickel content of Monel 400 alloy, it can resist corrosion under anhydrous ammonia and ammoniation conditions below 585�°C.
American standard designation: UNS N04400, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544.
German standard designation: W.Nr. 2.4360, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754.
Japanese standard designation: JIS NW4400, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907.
Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061.
We can provide the following the form:Monel alloy 400 coil; Monel alloy 400 strip;Monel alloy 400 plate; Monel alloy 400 sheets; Monel alloy 400 tube; Monel alloy 400 pipe;Monel alloy 400 flat; Monel alloy 400 bar
GB:NS111;JIS:NW4400;UNS:N04400;W.Nr:2.436
This alloy is mainly used for
1. Seamless water pipes and steam pipes in power plants
2. Sea water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude oil distillation
5. The pump shaft and propeller of the equipment used in seawater
6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation
7. Manufacture of pumps and valves used in the production of hydrochloric acid equipment
Monel R-405 alloy (UNS N04405) increases the sulfur content in the Monel 400 composition to enhance the machinability and become a free-cutting Monel alloy. Alloy 405 is an easy-to-machine version of Alloy 400. Alloy 405 adds a certain amount of sulfur, and the sulfide produced has chip breaking effect during machining, so it is suitable for automatic nut machine.
Like Alloy 400, Alloy 405 is resistant to corrosion by seawater, steam, and alkaline solutions at elevated temperatures. Alloy 405 is a solid solution alloy that can only be hardened by cold working. This nickel-based alloy also exhibits good corrosion resistance, weldability and high strength. The alloy exhibits low corrosion rates in fast-flowing brine and seawater environments and is well resistant to stress corrosion cracking in freshwater environments. Good corrosion resistance makes it widely used in marine and non-oxidizing chloride solution environment
American standard designation: UNS N04405, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4674, AMS 7234.
Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061.
We can provide the following the form:Monel alloy405 coil; Monel alloy 405 strip;Monel alloy 405 plate; Monel alloy 405 sheets; Monel alloy 405 tube; Monel alloy 405 pipe;Monel alloy 405 flat; Monel alloy 405 bar
Monel R-405 alloy (UNS N04405) increases the sulfur content in the Monel 400 composition to enhance the machinability and become a free-cutting Monel alloy. Alloy 405 is an easy-to-machine version of Alloy 400. Alloy 405 adds a certain amount of sulfur, and the sulfide produced has chip breaking effect during machining, so it is suitable for automatic nut machine.
Like Alloy 400, Alloy 405 is resistant to corrosion by seawater, steam, and alkaline solutions at elevated temperatures. Alloy 405 is a solid solution alloy that can only be hardened by cold working. This nickel-based alloy also exhibits good corrosion resistance, weldability and high strength. The alloy exhibits low corrosion rates in fast-flowing brine and seawater environments and is well resistant to stress corrosion cracking in freshwater environments. Good corrosion resistance makes it widely used in marine and non-oxidizing chloride solution environment
American standard designation: UNS N04405, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4674, AMS 7234.
Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061.
We can provide the following the form:Monel alloy405 coil; Monel alloy 405 strip;Monel alloy 405 plate; Monel alloy 405 sheets; Monel alloy 405 tube; Monel alloy 405 pipe;Monel alloy 405 flat; Monel alloy 405 bar
GB:NS111/JIS/UNS:N04405/W.Nr:2.436
This alloy is mainly used for
1. Seamless water pipes and steam pipes in power plants
2. Sea water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude oil distillation
5. The pump shaft and propeller of the equipment used in seawater
6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation
7. Manufacture of pumps and valves used in the production of hydrochloric acid equipment
Incoloy alloy 825 is a nickel-iron-chromium alloy with molybdenum, copper, and titanium added to enhance its corrosion resistance in highly oxidizing and reducing environments. It has excellent resistance to both reducing and oxidizing acids, stress-corrosion cracking, and pitting and crevice corrosion. It is also highly resistant to corrosion caused by chloride ions and sulfide stress cracking. The alloy has good mechanical properties and can be easily fabricated and welded. Incoloy alloy 825 is often used in chemical processing, pollution control equipment, oil and gas recovery, acid production, and nuclear fuel reprocessing industries. It is available in various forms such as pipes, tubes, plates, sheets, bars, wire, and forgings. The alloy can be further customized based on customer requirements for specific applications.
Trade names:
UNS N08825
W.Nr. 2.4858
Standards:
United States: ASTM B423, ASTM B424, ASTM B425, ASTM B564, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829, ASME SB423, ASME SB424, ASME SB425, ASME SB564, ASME SB704, ASME SB705, ASME SB751, ASME SB775, ASME SB829
Europe: EN 10028-7, EN 10088-2, EN 10216-5, EN 10217-7, EN 10272, EN 10296-2, EN 10297-2, EN 10298-2, EN 10222-2, EN 10263-4, EN 10272, EN 10302, EN 10312, EN 10357, EN 1092-1, EN 1092-2, EN 1092-3, EN 1092-4, EN 1092-5, EN 1759-1, EN 1759-2, EN 1759-3, EN 10204, PED 2014/68/EU
Germany: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17753, DIN 17754, DIN 17756, DIN 17758, DIN 17858
France: NF A 49-311, NF A 49-321, NF A 49-322, NF A 49-324, NF A 49-325
United Kingdom: BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA16, ASTM B423, ASTM B424, ASTM B425, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829
Japan: JIS G3101, JIS G3103, JIS G3120, JIS G3141, JIS G3161, JIS G3163, JIS G3192, JIS G3193, JIS G3201, JIS G3214, JIS G3221, JIS G3311, JIS G3445, JIS G4051, JIS G4303, JIS G4304, JIS G4305, JIS G4308, JIS G4309, JIS G4318, JIS G4320, JIS G4321, JIS G4801, JIS G4805, JIS G4808, JIS G5101, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G5510, JIS G5511, JIS G5512, JIS G5521, JIS G5523, JIS G5525, JIS G5528, JIS G5702, JIS G8031
We can provide the following the form:Incoloy alloy825 coil; Incoloy alloy 825 strip;Incoloy alloy 825 plate; Incoloy alloy 825 sheets; Incoloy alloy 825 tube; Incoloy alloy 825 pipe;Incoloy alloy 825 flat; Incoloy alloy 825 bar
BS:3072/NF:A 49-311/UNS:N08825/W.Nr:2.4858
Refining and Chemical Processes
Distiller
chemical reactor
Hydrogen Chloride Hydrogenation Reactor
Marine Engineering
Nuclear Fuel Reprocessing Equipment
Incoloy Alloy 907 is a high-strength, high-temperature alloy mainly composed of nickel, chromium, iron, molybdenum, niobium and other elements. It has excellent corrosion resistance, oxidation resistance and creep resistance, and is widely used in aviation, energy, chemical and other fields. The following is the detailed introduction of Incoloy Alloy 907:
performance:
Corrosion resistance: Incoloy Alloy 907 has good corrosion resistance in various environments such as acid, alkali and salt.
Oxidation resistance: Incoloy Alloy 907 has good oxidation resistance at high temperature, and can resist oxidation, thermal corrosion and high temperature oxidation.
Creep resistance: Incoloy Alloy 907 has good creep resistance under high temperature and high stress.
Processability: Incoloy Alloy 907 can be processed by various processing methods, such as forging, heat treatment, cold working, hot rolling, etc.
The international standard designations for Incoloy alloy 907 include UNS N19907 and W.Nr. 2.4663. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan.
Here are the specific standards and designations for Incoloy alloy 907 in different countries:
United States: AMS 5541, AMS 5542, AMS 5544, AMS 5548, ASTM B366, ASTM B408, UNS N19907
Germany: DIN 17750, DIN 17752, DIN 17753, DIN 17754, W.Nr. 2.4663
United Kingdom: BS HR 505
Europe: EN 10095
Japan: JIS H4551, JPI-SB46
We can provide the follwoing the form:Incoloy alloy907 coil; Incoloy alloy907 strip;Incoloy alloy907 plate; Incoloy alloy907 sheets; Incoloy alloy907 tube; Incoloy alloy907 pipe;Incoloy alloy907 flat; Incoloy alloy907 bar
BS:HR 505/JIS:NW4894/UNS:N19907/W.Nr:2.4669
Incoloy Alloy 907 is widely used in aviation, energy, chemical and other fields, such as:
Heat treatment equipment and furnaces in high temperature oxidation environment
Components of turbine engines and jet engines in aerospace
Reactors, distillation towers and other components of chemical equipment
Fuel elements in the nuclear industry, reactor internal structures, etc.
It should be noted that when selecting and using Incoloy Alloy 907, it needs to be confirmed according to the specific situation and comply with local standards and regulations.
Incoloy Alloy 909 is a high-temperature high-strength alloy, which is a kind of nickel-based alloy. It contains nickel, iron, chromium, molybdenum, cobalt and other elements, and added traces of carbon, aluminum, titanium, zirconium and other elements. Incoloy Alloy 909 has excellent high temperature performance, high strength and corrosion resistance, and has good stability and durability in high temperature and corrosive environments, so it is widely used in aerospace, nuclear energy, chemical, petrochemical, medical equipment and other fields .
Key features and benefits of Incoloy Alloy 909 include:
High-temperature performance: Incoloy Alloy 909 can still maintain high strength and good stability in high-temperature environments, and can be used for a long time in high-temperature environments around 1100�°C.
Corrosion resistance: Incoloy Alloy 909 has excellent corrosion resistance, can withstand the corrosion of most organic acids, alkaline solutions and salt water, and also has a certain resistance to hydrogen corrosion.
High strength: Incoloy Alloy 909 has excellent strength and can maintain its mechanical properties under high temperature and high stress environment.
Ease of processing: Incoloy Alloy 909 is easy to process and shape, and can be processed by brazing, arc welding, and TIG welding.
The international standard designations for Incoloy alloy 909 include UNS N19909 and W.Nr. 1.4884. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan.
Here are the specific standards and designations for Incoloy alloy 909 in different countries:
United States: AMS 5884, AMS 5885, AMS 5886, AMS 5891, ASTM B408, UNS N19909
Germany: DIN 17752, DIN 17753, DIN 17754, W.Nr. 1.4884
United Kingdom: BS HR 6
Europe: EN 10095
Japan: JIS H4551, JPI-SB46
We can provide the following the form:Incoloy alloy909 coil; Incoloy alloy909 strip;Incoloy alloy909 plate; Incoloy alloy909 sheets; Incoloy alloy909 tube; Incoloy alloy909 pipe;Incoloy alloy909 flat; Incoloy alloy909 bar
Incoloy alloy 925 is a precipitation-hardenable nickel-iron-chromium alloy that contains additions of molybdenum, copper, titanium, and aluminum. The alloy has excellent mechanical properties at both ambient and elevated temperatures, making it suitable for use in a wide range of applications, including sour gas and oil production, aerospace, chemical processing, and marine engineering.
Incoloy alloy 925 is known for its high strength, which is achieved through a combination of solid solution strengthening and precipitation hardening. It also exhibits excellent resistance to corrosion and oxidation in a variety of environments, including those containing sulfides and chlorides.
The addition of molybdenum and copper to the alloy improves its resistance to pitting and crevice corrosion, while the titanium and aluminum additions enhance its resistance to intergranular attack. The combination of these elements makes Incoloy alloy 925 highly resistant to stress corrosion cracking and hydrogen embrittlement.
The alloy is typically supplied in the solution annealed condition, and can be easily fabricated using common techniques such as welding, brazing, and machining. After fabrication, the alloy can be precipitation hardened to achieve its maximum strength.
Incoloy alloy 925 is available in a range of forms, including round bars, flat bars, forgings, and wire. It is also available in various sizes and dimensions to meet the specific needs of different applications.
Overall, Incoloy alloy 925 is a versatile and high-performance alloy that offers excellent strength, corrosion resistance, and durability in demanding applications.
The international standard designations for Incoloy alloy 925 include UNS N09925 and W.Nr. 2.4858. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan.
Here are the specific standards and designations for Incoloy alloy 925 in different countries:
United States: AMS 5660, AMS 5661, AMS 5662, AMS 5663, AMS 5664, AMS 5672, AMS 5872, ASTM B408, ASTM B805, UNS N09925
Germany: DIN 17742, DIN 17753, DIN 17754, W.Nr. 2.4858
United Kingdom: BS 3076, BS HR 6
Europe: EN 10095, EN 10204-3.1
Japan: JIS G4902, JPI-SB46
We can provide the following the form:Incoloy alloy925 coil; Incoloy alloy925 strip;Incoloy alloy925 plate; Incoloy alloy925 sheets; Incoloy alloy925 tube; Incoloy alloy925 pipe;Incoloy alloy925 flat; Incoloy alloy925 bar
Incoloy alloy 925 has a wide range of applications in various industries, including:
Oil and Gas Industry: Incoloy alloy 925 is widely used in oil and gas industry due to its high strength, excellent corrosion resistance, and resistance to sulfide stress cracking in sour environments. It is used in various components of downhole tools, such as subsurface safety valves, tubing hangers, and packers.
Incoloy Alloy 926 is a super-austenitic nickel-based alloy with high levels of molybdenum, nitrogen, and chromium. It is known for its excellent corrosion resistance in a variety of challenging environments, including sulfuric acid, hydrochloric acid, and seawater. Here is a detailed introduction to Incoloy Alloy 926 and its applications:
Incoloy alloy 926 is a super-austenitic nickel-based alloy with high corrosion resistance and excellent mechanical properties at high temperatures. It has a chemical composition of 22% chromium, 25% molybdenum, 6% tungsten, and 0.5% nitrogen, with nickel and iron making up the balance. The alloy also contains small amounts of copper and titanium.
Incoloy alloy 926 is known for its excellent resistance to a wide range of corrosive environments, including chloride ion stress-corrosion cracking and pitting and crevice corrosion. It also has good resistance to sulfuric acid and phosphoric acid, as well as seawater and brine solutions. The alloy's high nickel and molybdenum content provides excellent resistance to reducing environments, while its chromium content enhances its resistance to oxidizing environments.
In terms of mechanical properties, Incoloy alloy 926 exhibits high strength and toughness, along with excellent weldability and formability. It can be fabricated using a variety of techniques, including hot and cold working, machining, and welding.
Due to its excellent corrosion resistance and mechanical properties, Incoloy alloy 926 is commonly used in a variety of industries, including chemical processing, oil and gas, nuclear, marine, and desalination. It is often used in applications involving sour gas environments, such as in the production of oil and gas, as well as in heat exchangers, pressure vessels, and piping systems.
The international standards and specifications for Incoloy alloy 926 are as follows:
United States: ASTM B649, AMS 5737, AMS 5853, UNS N08926 Europe: EN 1.4529, SEW 400 Germany: DIN 17752, DIN 17754, DIN 17750, W.Nr. 1.4529
We can provide the following the form:Incoloy alloy926 coil; Incoloy alloy926 strip;Incoloy alloy926 plate; Incoloy alloy926 sheets; Incoloy alloy926 tube; Incoloy alloy926 pipe;Incoloy alloy926 flat; Incoloy alloy926 bar
Incoloy alloy 945 is a high-strength, corrosion-resistant nickel-iron-chromium alloy. It is primarily composed of nickel, chromium, and iron, with trace amounts of molybdenum, copper, and titanium. This alloy exhibits excellent resistance to stress-corrosion cracking, crevice corrosion, pitting, and intergranular corrosion. It is also highly resistant to hydrogen embrittlement and chloride stress corrosion cracking.
Incoloy alloy 945 has good mechanical properties at both ambient and elevated temperatures. Its high strength and ductility make it ideal for use in high-stress applications, such as gas turbines, chemical processing equipment, and marine applications. This alloy can withstand temperatures up to 1000�°C (1832�°F) and has a high fatigue strength, making it suitable for use in cyclically loaded components.
In addition to its excellent mechanical and corrosion resistance properties, Incoloy alloy 945 is also resistant to oxidation and sulfidation. This makes it well-suited for use in high-temperature environments where exposure to gases and corrosive elements is common.
Overall, Incoloy alloy 945 is a versatile and reliable alloy that is suitable for a wide range of demanding applications in industries such as aerospace, chemical processing, and power generation.
The execution standards for Incoloy alloy 945 by country are as follows:
United States: ASTM B163, ASTM B423, ASTM B829, UNS N09945
Europe: EN 10216-5, EN 10297-2, EN 10222-5, EN 10250-4, EN 10269, EN 10272, EN 10296-2, EN 10297-4, EN 10302, EN 10312
Germany: DIN 17742, DIN 17750, DIN 17751, DIN 17752, DIN 17754, W.Nr. 2.4633
United Kingdom: BS 3076
We can provide the following the form:Incoloy alloy945 coil; Incoloy alloy945 strip;Incoloy alloy945 plate; Incoloy alloy945 sheets; Incoloy alloy945 tube; Incoloy alloy945 pipe;Incoloy alloy945 flat; Incoloy alloy945 bar
GBG:H945/JIS/UNS:N09945/W.Nr:2.4669
Incoloy Alloy 945 is typically used in high-temperature applications where resistance to oxidation and creep are required. Some of the typical applications include gas turbine components, heat exchangers, furnace muffles, and petrochemical processing equipment.
Conclusion
Incoloy Alloy 945 is a high-temperature alloy with excellent resistance to oxidation and creep. Its chemical composition and mechanical properties make it suitable for use in high-stress environments at elevated temperatures. Its wide range of applications makes it an important material in the aerospace, petrochemical, and power generation industries.
Incoloy Alloy 890 is a high-performance corrosion-resistant alloy that belongs to the chromium-nickel-molybdenum series of alloys. It is mainly composed of nickel, chromium, molybdenum, iron, and copper. This alloy has excellent corrosion resistance in various corrosive environments such as acids, alkalis, and salt solutions.
Incoloy Alloy 890 offers high mechanical strength and toughness, good weldability, and ease of fabrication. It is resistant to stress corrosion cracking, pitting, and crevice corrosion, making it suitable for use in harsh and demanding applications in industries such as chemical processing, oil and gas, and marine engineering.
The chemical composition of Incoloy Alloy 890 typically includes 26-30% nickel, 19-23% chromium, 4-5% molybdenum, 1.5-3% copper, 0.3% maximum carbon, 2.0% maximum manganese, and 0.5% maximum silicon. It may also contain small amounts of other elements such as nitrogen, phosphorus, and sulfur.
In terms of mechanical properties, Incoloy Alloy 890 has a tensile strength of 620 MPa and a yield strength of 300 MPa at room temperature. Its elongation at break is 50% minimum. The alloy also has good impact strength and fatigue resistance at both room temperature and elevated temperatures.
Incoloy Alloy 890 can be heat-treated to enhance its mechanical properties. Annealing at 1093-1204�°C for 30 minutes per 25mm of thickness followed by rapid air cooling can improve the alloy's toughness and ductility. Solution annealing at 1093-1177�°C followed by rapid water quenching can improve its corrosion resistance and high-temperature strength.
Overall, Incoloy Alloy 890 is a versatile and high-performance alloy that can withstand corrosive environments and harsh operating conditions. Its excellent properties make it suitable for use in various industrial applications where high strength and corrosion resistance are required.
The following are the execution standards of Incoloy alloy 890 in various countries:
US: AMS 5837, AMS 5598, AMS 5666, AMS 5839, ASTM B366, ASTM B408, ASTM B425, ASTM B564, ASTM B751, ASTM B775, ASTM B829, UNS N08890
Europe: EN 10095
Germany: DIN 17742, DIN 17750, DIN 17754
UK: BS 3076
Japan: JIS G4902
China: GB/T 14992
We can provide the following the form:Incoloy alloy890 coil; Incoloy alloy890 strip;Incoloy alloy890 plate; Incoloy alloy890 sheets; Incoloy alloy890 tube; Incoloy alloy890 pipe;Incoloy alloy890 flat; Incoloy alloy890 bar
GB:GH89/JIS:G4303/UNS:N008904/W.Nr:1.4539
Manufacture of chemical equipment such as heat exchangers, reactors, and evaporators.
Applications in the petroleum extraction and refining industry, such as drill bits, casings, pumps, and valves.
High-temperature components in the aerospace industry, such as turbine disks, turbine blades, and combustion chamber components in jet engines.
Reactors and equipment in the pharmaceutical industry, as well as other equipment and components in high-temperature and corrosive environments.
Haynes 230 is a nickel-based superalloy that is known for its high strength, excellent resistance to oxidation and corrosion, and good thermal stability. It was developed by Haynes International, Inc., and is commonly used in high-temperature applications, such as gas turbine engines, aerospace, and chemical processing industries.
Chemical Composition: Haynes 230 is composed of a range of elements, including nickel (Ni), chromium (Cr), molybdenum (Mo), iron (Fe), cobalt (Co), manganese (Mn), silicon (Si), carbon (C), and aluminum (Al). The chemical composition of Haynes 230 can be adjusted within certain ranges to meet specific application requirements.
Mechanical Properties: Haynes 230 has excellent mechanical properties, including high strength, good ductility, and toughness. Its yield strength is 685 MPa and its tensile strength is 1025 MPa. It also has a 42% elongation rate.
Thermal Properties: Haynes 230 exhibits good thermal stability, making it an excellent choice for high-temperature applications. Its melting point is 1305�°C (2381�°F), and it has a thermal expansion coefficient of 13.7 �µm/m�·K (7.6 �µin/in�·�°F).
Corrosion and Oxidation Resistance: Haynes 230 has excellent resistance to oxidation and corrosion in high-temperature and high-stress environments. It has a good resistance to sulfur-bearing gases, such as hydrogen sulfide (H2S) and sulfur dioxide (SO2), and can withstand harsh chemical environments.
Weldability: Haynes 230 can be welded using a variety of methods, including gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and resistance welding. However, special precautions need to be taken during welding to avoid cracking and other defects.
Here are the country standards for Haynes 230 alloy:
USA: AMS 5878, AMS 5879, AMS 5962, AMS 5963, AMS 5964, AMS 5965, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, AMS 5998, AMS 5999, AMS 5877, ASTM B366, ASTM B435, ASTM B572, ASTM B619, ASTM B622, ASTM B626, ASTM B366, UNS N06230
Europe: EN 2.4733
Germany: DIN 17742, VdTÃ??V 546
UK: BS HR 201
Japan: JIS NW 6230
We can provide the following the form:Haynes 230 coil; Haynes230 strip;Haynes 230 plate; Haynes 230 sheets; Haynes 230 tube; Haynes 230 pipe;Haynes 230 flat; Haynes 230 bar
GB/JIS:NW 6230/UNS:R06230/W.Nr:2.4733
Haynes 230 is widely used in high-temperature applications, such as gas turbine engines, aerospace, and chemical processing industries. It is also used in heat exchangers, industrial furnaces, and in the production of petroleum and natural gas. Its excellent mechanical properties, corrosion and oxidation resistance, and good weldability make it a popular choice for a wide range of applications.
Haynes 718 Alloy is a high-temperature, high-strength nickel-based alloy developed by Haynes International. It has excellent oxidation resistance, corrosion resistance, and high-temperature strength, and is widely used in high-temperature and high-pressure environments in aerospace, energy, chemical, petroleum, and natural gas industries.
The chemical composition of Haynes 718 Alloy includes approximately 52% nickel, 19% chromium, 3% titanium, 5% aluminum, about 0.9% iron, and trace amounts of carbon, sulfur, phosphorus, copper, and tantalum. This combination of elements gives Haynes 718 Alloy its excellent high-temperature performance. In addition, Haynes 718 Alloy uses advanced heat treatment processes, which can further improve its high-temperature strength and oxidation resistance.
Haynes 718 Alloy can be made into various shapes of products, such as sheets, rods, pipes, forgings, castings, and welding materials, etc. Its mechanical properties improve with increasing temperature, and it can maintain high strength and toughness at high temperatures ranging from 600�°C to 980�°C. In addition, Haynes 718 Alloy has excellent oxidation resistance and can withstand high-temperature oxidation environments for a long time.
Haynes 718 alloy is an important nickel-based superalloy used in high-temperature applications such as gas turbine engines. Below are the standards for Haynes 718 alloy in various countries:
United States: AMS 5596, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5665, AMS 5666, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5758, AMS 5759, AMS 5660, AMS 5661, AMS 5677, AMS 5909, AMS 5927, AMS 5947, AMS 5950, AMS 5963, AMS 5964, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B637, ASTM B670, UNS N07718
Europe: EN 2.4668
Germany: DIN 17744, VdTÃ??V 718
France: AFNOR NC 19 Fe Nb
United Kingdom: BS HR 201, BS HR 401, BS HR 501
Japan: JIS NW 0771
We can provide the following the form:Haynes 718 Alloy coil; Haynes 718 Alloy strip;Haynes 718 Alloy plate; Haynes 718 Alloy sheets; Haynes 718 Alloy tube; Haynes 718 Alloy pipe;Haynes 718 Alloy flat; Haynes 718 Alloy bar
BS:HR 201/JIS:NC19FeNb/UNS:N07718/W.Nr:2.4669
Haynes 718 is a nickel-chromium alloy that is known for its high strength and excellent corrosion resistance. It is commonly used in a wide range of applications, including:
Aerospace industry: Haynes 718 is widely used in the aerospace industry due to its high strength, excellent fatigue resistance, and good weldability. It is used for components such as gas turbine engine parts, thrust reversers, and exhaust systems.
Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures.
Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum.
Hastelloy C-2000 has excellent resistance to localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking, as well as to intergranular attack and corrosion from wet chlorine gas. It also has good resistance to oxidizing and reducing environments, making it suitable for use in a wide range of industrial applications, including chemical processing, pollution control, and pulp and paper production.
In terms of mechanical properties, Hastelloy C-2000 has a minimum tensile strength of 620 MPa and a minimum yield strength of 270 MPa, along with a minimum elongation of 45%. It has a hardness range of HB 215-335.
Overall, Hastelloy C-2000 is a highly versatile alloy that offers excellent resistance to a wide range of corrosive media, combined with good mechanical properties and ease of fabrication. It is a popular choice for applications where corrosion resistance is critical, such as chemical processing, pollution control, and pulp and paper production.
Here are the national standards for Hastelloy C-2000 alloy:
United States: AMS 4675, AMS 7233, ASTM B366, ASTM B574, ASTM B575, ASTM B619, ASTM B622, ASTM B626, UNS N06200
Europe: EN 2.4675
Germany: DIN 17744
France: AFNOR NU-30M
United Kingdom: BS HR 505
Japan: JIS NW 6200
We can offer the following products:Hastelloy C-276 coil; Hastelloy C-276 strip;Hastelloy C-2000 plate; Hastelloy C-2000 sheets; Hastelloy C-2000 tube; Hastelloy C-2000 pipe;Hastelloy C-2000 flat; Hastelloy C-2000 bar
GB:GH3600/JIS:NW 6200/UNS:N06200/W.Nr:2.4675
Hastelloy C-2000 is a high-performance nickel-molybdenum-chromium alloy with copper and tungsten additions, known for its exceptional resistance to a wide range of corrosive media, including sulfuric acid, hydrochloric acid, nitric acid, and their mixtures.
Hastelloy C-2000 was developed by Haynes International as an improved version of the original Hastelloy C alloy, with enhanced corrosion resistance and improved mechanical properties. Its chemical composition includes approximately 59% nickel, 16% molybdenum, 16% chromium, 1.6% copper, 0.6% tungsten, and smaller amounts of iron, manganese, silicon, carbon, and aluminum.
538947 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
