Ecu reader - advanced tool for cars motor ecu internal eeprom reading, writing and coding by obdii connector.
Supported car types:
Vw, audi, skoda, seat (vag): all diesel engines with edc15 - original car odometer/mileage reading and programming from motor ecu, immobiliser pin code reading and programming from motor ecu, immobiliser disable function, eeprom read/write - everything by obdii connector:
This high-performance tool covers up the new generation of instrument clusters from 2002.
Included are golfv, touran, passat b6, jetta, the new seat models, such as altea ii and the new skodas.
This high-performance tool for vw / seat /skoda cars enables you to:
Recalibrate the odometer
Add keys to the car even though you don't have all existing keys available
Do key adaptation without 5 minutes delay on new keys
Read out the login / secret key code (skc)
Write the vehicle identification number and the immobiliser number
Download and store the entire immobiliser block decrypted
Clone instrument clusters by writing the immobiliser block from a file
Read out trouble codes of can-ecuíSs and erase them
Those functions are absolute unique and give you the chance to earn the money when you normally have to send away your customer.
An example:
A customer wants an additional key adapted to his car.
The normal diagnostic procedure requires that all adapted keys are available.
Unfortunately your customer brought only one key along.
At this point you have to send your customer away (and with him his money ...)
Not with vagdashcan.
You can add a key to the existing ones without erasing them. You start the procedure with the new key and after some seconds it is adapted to the car.
You don't have to wait 5 minutes for the adaptation channels to become reachable.
Another example:
A customer wants to change his instrument cluster. Normally this is procedure with a lot "ifs and buts".
Not with vagdashcan, because you are beyond standard diagnostic procedures!
Just read out the origin immobiliser block and store it. Then you change the instrument cluster and write the origin immobiliser block into the new cluster. That's it.
No further adaptations are necessary.
You don't need new keys.
You don't have to care for immobiliser type classes
Benz star compact 4 is the professional diagnostic equipment for mercedes benz cars manufactured, it is the replacement of hht. Ibm compact 4 operates based on the windows xp system.
Function:
1. 1989~up to now car, bus, truck, sprint, smart;
2. All electric system diagnostic; (do not include flash code);
3. Reading out and erasing trouble code; reading the real-time data of sensor and actuator; testing the components of cars; coding and programming.
Character:
1. Realizes all the function of official factory benz compact 3.
2. C4 multiplexer can connect to factory computer and ibm laptop.
3. Complete maintenance data. It could offer full disassembly and assembly circuit diagram, working principle and element place anytime needed. It is the best assistant for maintenance man.
Package:
1. C4 star multiplexer( benx vci)
2. 16 pin obd ii cable (obd diagnostic socket )
3. 38 pin cable (old benz round socket )
4. 14 pin cable (sprint. Bus. Truck round socket)
5. 4 pin cable (old benz rectangle socket)
6. 19 pin cable (computer communication)
Optional configuration:
1. Ibm laptop: t30
2. Tool box
3. Com connect with the laptop cable
4. Hard disk of each language.
A hand-held diagnostic testing equipment for servicing Nissan in-vehicle electronic systems, with the aim of realising swift and accurate diagnosis and repairs at Nissan dealerships worldwide. The diagnostic tester will be introduced at Nissan dealerships in Japan and other global markets. The progressive launch of the new system will coincide with the release of the new Skyline sedan in Japan in late 2006, and other global markets which sell the Infiniti G35. Subsequently, the Consult III will be progressively introduced to all of the remaining markets as the next generation of Nissan vehicles are released.
The timely and precise diagnosis of a vehicle��s problem has become increasingly complex as more intricate electronic hardware is an intrinsic part of new vehicles. There has also been a remarkable increase in the number of computers connected to the vehicle's Controller Area Network (CAN). In the past 5 years, the number of computer systems installed in modern vehicles has doubled from only 8 or so in 2001. The CONSULT-III has been designed to address these complex and advanced in-vehicle electronic devices, maximising diagnostic precision, improving repair time and quality and futher reducing service times and costs for Nissan customers..
The professional duplicating machine, transpronics, has been designed and developed to assist immobilizer system specialists. Transpronics is not only a duplicating machine; it is also a unique machine that can make transponders from eeproms in immobilizer boxes when a customer has lost all keys. It can also inform you if a transponder is locked or not. It has been developed over 4 years. It can copy most crypto transponders like 42, 45, 4d, most of 44 vag and some 40 and 41 transponders. It can copy texas fixed transponders to tpx1 without battery transponders.
+ identify transponder
+ write transponder codes
+ copy transponder
+ calculate eeprom memory
+ calculate transponder codes from eeprom memory
+ calculate pin-codes from eeprom memory , from chassis and from transponder
+ test transponder
+ generate fixed transponder codes
+ pc software
2- copy most of crypto transponders
A- philips crypto 42
B- philips crypto 44 vag
C- philips crypto 45
D- texas crypto 4d
E- some philips crypto 40 and 41
3- show all information about all transponders
A- transponder types
B- transponder codes
C- locked or not
D- which car brand
E- eeprom codes
F- pin-codes
Update for opel immo-1 immo-2 and air-bag tool
Update to last version 2.50
Latest update: vw polo , seat ibiza cordoba 2001 - 2005, fabia 2004 ect.
Single click access for vdo seed-key dashes!
(this means: vw passat b6, bora/jetta, polo to 2004 year, golf 4, sharan to 2003 year, skoda octavia/fabia to 2004 year , some seat dashes up to 2004 year ect...)
Vag kombiinstrument / immo box eeprom programmer... Via obd connector!
Honda srs system clear crash - mcu tms 320 work by obdii. No software is needed. The best device that can repair crash data for all honda airbag unit with mcu tms 320 by obdii. No software is needed! plug and done!
Operation method: (as easy as abc)
Plug this item to the obd2 socket in your car, key on
You can hear 3 sounds "dii", then key off. Done!
BMW GT1 is a new OEM diagnostic instrument for BMW cars, which is more scientific designed and portable. Integrating network, maintenance-information seeking and measurement system, it is capable of diagnosing EVERY system of all BMW series.
The diagnostic system DIS and GT1 allow you to electronically diagnose your car, at the same time allowing the upgrade of various aspects of the dashboard.
Diagnostic & Information System (DIS) - Contains Technical Information System (TIS), this includes technical literature of repair manuals (from E36), Service Information Bulletins (from 1988), Technical Reference Information Bulletins (from 1988), Technical Data, etc. 100% Performance on all diagnostic features on BMW (2006) Via a direct connection to your BWM the DIS and GT1 system can register in only a couple of seconds any incidences that have occurred after the last check-up. It is by far, the most advanced tool used for diagnosis on BMW cars.
BMW GT1 includes:
1. BMW yellow Multiplexer (DK 2.1 version)
2. OBD-II cable
3. 20 pin diagnostic cable
4. LAN cable (with 100M speed)
5. Latest software DIS,SSS and TIS.
Dealing with BMW complex electronic control Units (ECU) along the entire process chain requires reliable communication and data description, The Diagnostic Tool Set consists of a set of PC-based application which support developers, engineers and technicians in all aspects of communication with ECUs and vehicles via serial communication lines.
Typical applications of the BMW Diagnostic tool include:
*Specification of ECU\'s diagnostic data
*Communication development
*Reading and clearing error memory
*Flash data uploading and downloading
*Reading measurement values
*Input/output control
*Calibration of single ECU variables
*Coding of ECU variables
*Coding of ECU variants
*CAN (controller Area Network) bus mode emulation
*integrated solutions for on-board/off-board
*fast and simple configuration of GUI and communication data instead of programming
*customer specific protocols supported
*long term application by supporting widespread ASAM standards
*language is English and Germany
Models covered:
1 series E87
3 series E30, E36, E46, E83
5series E34,E39,E53,E60,E61
6 series E63,E64
7 series E32,E38,E65,E66
8 series E31,E52
E90
Mini R50,R52,R53
X series E53
Rolls Royce
Z series E85,E52.
OPS unit with DIS software is used for diagnosis, which is carried out via OBD-II socket.
Config
1.OPS Multiplexer.
2.OBD-II diagnostic cable.
3.Most diagnostic cable.
4.LAN Cable.
5.SSS PC(Optional).
6.IBM T23/T30 (Optional).
7.DIS 80G HD (Optional).
8.Wireless Card (Optional).
9.Toolbox(Optional).
This new key programmer is suited for all BMW models from year 194 to 2004 equipped with EWS module(including EWS2, EWS3 and EWS4, Rover75, MINI, Range Rover, Free Lander, Discovery).
Features:
-Supports EWS2,EWS 3, EWS3+
-Support MCU type:0D46J,1D47J,2D47J,2D47J(encrypted)
-Safe for reading data from the EWS(encrypted).
Product Name: T-Code 7.2 T300
Part No.: CCT300
Net Weight: Net Weight: 3.5KG
Functions
Use for key programming. More cars than any other transponder machine .
PC Based Mercedes-Benz Diagnostic System WO/Laptop
Introduction
MB STAR realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to July of 2007,can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.
Configuration
- MULTIPLEXER
- 16+PIN OBD II cable
- 38+PIN cable
- 14+PIN cable
- 4+ pin cable
- RS232 communication cable (navigation port)
Optional Configuration:
1. IBM laptop: such as T23, T30...with COM.
- Testable system
- ENGINE
- AUTO-SPEED
- AIR CONDITIONAL SYSTEM
- SRS
- ABS
- ASR
- MPL
- GM
- BENZ ORIGINAL ANTI-THEFT DASX SYSTEM
- KEYLESS ENTERING SYSTEM
- OBD-II SYSTEM............ other new system ,100% as same as original diagnostic Star 2000 .
FUNCTION:
Reading trouble code
erasing trouble code
live-data, adaptation
component testing
maintenance information consultation
component location diagram
wiring diagram.
Coding the new ECU.......
DAS:
Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing.
WIS net:
Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -----all in detail.
star finder:
component location diagram for colorized.
software: it is 01,2008, more than 20 kinds of language, such as, en,de,fr,cn,jp,kr,gr,br,pl,dk,ru,ro,pt,se,tr,es,hu,sp,it.
Features:
It is newest version 1/2008, which Fully support European, American and Asian vehicle types, most of which can be adjusted via OBD-II diagnostic plug.
1. BENZ A/C/CL/CLK/E/G/M/SL/SLK class (before 2000) New E/C class adopt CAN cable technology, cluster-socket operation (no need to adjust EIS/EZS)
2. Most of BMW 3/5/7/8/X/Z class vehicles, include operation on EWS, LCM can be adjusted via OBD-II diagnostic plug.
Features
1. BMW 7 SER E65 CAS via OBD-II
2. newest types BMW 1/3/5/7SER and E87/E90/E91/E60/E6X/E66 CAS
Via Cluster-Plug
3. BMW MINI SER(after 2003),Landrover SER cluster adjusting.
4. Mercedes Benz S/E/C SER cluster and (EIS) ignition module adjusting
5. BENZ W203/W211 cluster via cluster-Plug,no need to programme EIS
6. AUDI/VW/BENZ/BMW SER vehicles via OBD-II
7. Hyundai/Peugeot/Renault/Honda/Picasso (NEC CPU) cluster adjusting
8. MOTOROLA SER CPU programming.
Introduction
1. Digital odometer adjusting 2. Radio decoding
3. Airbag reseting 4. Immobiliser PIN code reading
5. ECU memory programming 6. Update through Internet
7. Support all kinds of latest vehicles. 8. Can view the pictures on Digimaster srceen directly
Properties
1. Local control:Touch-screen, Keyboard 2. Remote control: pc web link
3. LCD: 320*240 TFT real colorized srcreen 4. Port: USB port, series of adapter port
5. Power Supply: 12V DC 6. CF card: 1GB
7. Multi-Language for choose
BMW group tester one (GT1) is offered to the aftermarket in the same specification that is currently supplied to BMW franchised dealers. It is special-purpose tool of BMW Series.
Gt1 is supplied with a Pentium based laptop PC on a Windows platform connected to a high specification communications and measurement interface.
GT1 can complete coverage of ALL BMW systems, one thing that can only be done using the GT1, this function is called Electronic Control Unit (ECU) programming and configuration. Many of the original electronic systems on modern vehicles can now be re programmed using software; historically any changes to rectify software problems would involve a new ECU which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems. The BMW GT1 system allows you re programme all BMW car ECUf+s to fix software or to install a blank ECU to a repaired vehicle. GT1 is the only system that allows you to do this and is absolutely essential if working on Freelander , the GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launched this year.
BMW GT1 software kit comprises of five system ,TIS system .DIS data system ; diagnosis system .measuring system and manangement system . you can to test and check data information same time in GT1.
Test function :
Read faulty code ,clear faulty code ,data stream .activate state,programming ,component test ,maintenance data information ,components location ,wiring diagram etc...,TIS AND DIS ARE SUPPLY all of system diagram of all of BMW car, Components location, maintainence method and coding information etc. Can do completely of BMW car system.
1. GT1-SCAN Pro mainbody
2. Network cable
3. GT1 for vehicles with 20pin diagnostic connector
4. GT1 for vehicles with OBII diagnostic connector
5. Latest diagnostic version of software(two HDD).
Peugeot Planet 2000 is diagnostics software and hardware used in authorized Peugeot workshops.
The software runs on Windows XP. Peugeot Planet 2000 interface is connected to computer via USB cable.
Hardware
An IBM ThinkPad X31 laptop computer with Windows XP Pro operating system, Norton anti-virus software (with 3-year Internet update),
An integrated Wi-Fi card for wireless communication via Internet and a Blue tooth card. The equipment is covered by a 3-year on-site warranty.
PC specifications: . 1.4 GHz Intel Centrino processor, 40 GB hard disk, external DVD drive. . A Mobiles Kevlar protective cover with keyboard protection and shoulder strap. . PEUGEOT PLANET Diagnosis and PEUGEOT PLANET 2000 diagnostic and repair software is already installed but requires to be configured. . An ISDN modem / router: - Provides the Internet link in the workshop via a digital line but other types of modem can also be adapted depending on the local requirements, such as Standard STN or ADSL modems. - The power supply is a 220 V / 17 V transformer (the largest). . A Wi-Fi access point for wireless connections - Allows you to send secure data by wireless connection to one or more PCs within a 100 meter radius around the terminal. - The power supply is a 220 V / 5 V transformer. . A diagnostic tool/vehicle link using the Peugeot Planet Interface (PPI) communication card - Supplied with USB cable, 16 channels interface and 2/30 channels cable kit. - Communicates with all protocols used by ECUs installed in Peugeot range vehicles.
This diagnostics software allows you to perform complete diagnostics of all from 1995 until present models. Diagnostics is performed via obd-ii connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Main features:
Unlike other universal car scanner tools which only read fault codes, this software performs nearly all the functions like the original dealer diagnostic tool. Our diagnostic interface contains k-line multiplexer, can-bus interfaces and sae j1850 bus (both pwm and vpw).
Mercedes benz star2000 (version 2007) is the professional diagnostic equipment for mercedes benz manufactured after year 2000. It is the replacement of hht. Star2000 operate based on the windows xp system. It includes workshops information system(wis), the movement management system (star utilities) and the automatically diagnose system(das). It can enter all the benz cars, such as autobus truck, saloon car, sports car, smart car and so on.
Das/wis/star finder/epc.
7kg, aluminum box
525110 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
