Stainess steel flange
02) Process method: cold drawn/cold pilgered 03) Surface finish: annealed/cold pilgered 04) Material: TP304, TP304L, TP310/S, TP316L, TP316/316L dual grade, TP317L, TP321, TP347 05) Standard: ASTM(ASME), EN, DIN, JIS and etc. 06) Specifications: a) O.D.: 12mm -426mm b)W.T. : 1mm ¿C 20mm c)Length: customized 07) Delivery conditions: annealed & pickled 08) Applications: for general service,for fluid and gas transport; structure and machining,oil and gas service, chemical and fertile.
01) Commodity name: welded austenitic stainless steel pipes & tubes 02) Process method: tig & plasma-welded 03) Surface finish: annealed/manual polished/mechanical polished 04) Material: 304, 304l, 310/s, 316l, 316/316l dual grade, 317l, 321, 347. 05) Standards: astm a 249/m, astm a 554/m, jis 3463, jis 3468, en 10217-7, din 17455/57, astm a 269/m, astm a 312/m, astm a 778/m, astm a 789, astm a 790, jis 3463, jis 3468, en 10217-7, din 17455/57, gb/t 12771/12770 06) Specifications: a) o.D.: 16mm -630mm B)w.T. : 0.5mm¿c 12mm C)length: customized 07) Delivery conditions: annealed & pickled 08) applications: for general service, for fluid and gas transport; structure and machining, oil and gas service, chemical and fertile. 09) packing: simple package by weaving bags. (or as per the customerí»s request by weaving bags For each piece then packed in seaworthy wooden case)
01) Commodity name: austenitic stainless steel u-formed pipes & tubes 02) Process method: cold drawn/cold pilgered 03) Material: tp304, tp304l, tp316, tp316l, tp321 04) Standard: astm ( asme) , en, din, jis and etc. 05) Specifications: a) o.D.: 10mm -219mm B) W.T. : 1mmíºc 13mm C) Length: customized 06) Delivery conditions: annealed & pickled 07) Applications: widely used to manufacture outdoor equipment building materials, heat resistant parts, and parts that are difficult to make heat treatment for chemical, coal, petroleum industries. 08) Packing: packed by weaving bags in bundles, then protected by seaworthy wooden case.
01) commodity name: austenitic stainless steel coil pipes & tubes 02) process method: cold drawn/cold pilgered 03) material: tp304, tp304l, tp316, tp316l, dual grade 317l , 316ti, tp321 04) standard: astm ( asme) , en, din, jis and etc. 05) Specifications: a) o.D.: 1/4í¦ -3/4í¦ B) w.T. : 0.028í¦- 0.065í¦ C) length: customized 06) delivery conditions: annealed & pickled 07) applications: widely used in petrol, chemical, pharmacy, foodstuff, machinery, spaceflight, war industry, boiler gas, hot water heating parts, hardware, shipping, power and other industries. Packing: packed by weaving bags in bundles, then protected by seaworthy wooden case.
Stainless steel coils
Material: Q195,Q235,SPCC,08AL,users can also be based on the need for production. BUNDLE
Output power 0.12kw~200kw, output torque: 6n.M~62800n.M, ratio: 1.3~289.74 Wp series 40~250, jrt series 17~187
All kind size and standard stainless steel tube Packed in seaworthy wooden case
Stainless steel wire As a kind of basic industrial material, stainless steel microwire and products made from it are widely used in fields of petrochemistry, aviation & spaceflight, textile, printing, electronic communication, environmental protection, medi-cal treatment and daily articles. Finished products High sieve filter mesh, high fine filter High precision printing mesh Strengthened radiation & static electricity resistant compound material Electron displaying filter Fiber communication cable High conductive shield mesh Secure gasbag Radiation resistant shield clothing static electricity resistant uniform
Expansion joint Custom made Various
Truss The light duty of ladder truss, triangular truss, and square truss has standard size as 250 x 250mm, and 300 x 300mm. The medium duty trusses have 400 x 400mm, 450 x 450mm, and 450 x 600mm. The heavy duty trusses have the sizes of 500 x 600mm, 520 x 760mm, and 520 x 1, 000mm. The length is 0.5 - 4.0m. If the square truss overtop is 400 x 400mm, there are two connecting ways: one is square connector, the other is aluminum board connector. The main tube is made of 50mm, the inside tube is made of 30mm. The light duty uses 20mm, which has large loading capability for using in heavy project.
Drum type film filter Used for pre-filtering and terminal fine filtering of the mediums as thin liquid, air, soup, pure water etc. Flow:0.5m3/h-30m3/h Filter precision ¦0.1-20ª8m Filter elements have two connecting forms as insert-type 226seat and flat mouth type 226 seat. Filter element: 5, 10, 20, 30 Filter element can adopt polypropylene, nylon, ptef etc. Drum adopts aisi304 or aisi316l material, inner and outer surfaces adopt polishing, surface roughness ra
Single-effect outer cirulation concentrator The device is to concentrate the material in the occasions such as china traditional drugíwest drugídextroseíamylum sugaríoral liquidíchemistryífoodstuffímonosodium glutamate and milk product and to reclaim the industrial organic solvent such as alcohol.It is suitable to concentrate the thermal sensitive material under lower temperature and vacuum with little batch number and multiple varieties. Feature and profits 1.Alcohol reclamation: large reclamation capacity and the vacuum concentration procedure make it's production capacity five to ten times of that of the old counterpart and can lower the energy consumption for 30%, featuring little investment and high reclamation profit. 2.Cocentrated liquid material: the device uses the modes of outer-heated natural cycle and vacuum negative pressure evaporation featuring swift evaporation with concentration proportion of 1.3; the liquid material concentrates without bubble under full seal state. The drug liquid after concentration by the device features non-contamination and thick drug taste and easy cleaning(it is just to open the up and down cover for cleaning.). The device is easy to handle and it needs a little foundation area for installation. The heater and evaporator use stainless steel for thermal purpose.The polyurethane is used as the thermal material. The surface is treated with sand grinding and surface polishing, meeting with the gmp tandard.
Stainless steel elbow 1.Stainless steel elbow 2.Size:1/8'-4' 3.Package:poly bag in carton
Stainless steel pipe fitting 1.Stainless steel pipe fitting in threaded and socket-weled 2.Size:1/8;'-4' 3.Threaded standard:bsp, bspt, npt 4.Material standard:aisi 304, 316
Multi-functional exacting tanks The device is to service at such industries as china traditional drug, foodstuff and chemistry for the technologies such as normal pressureíómini pressure, water decocting, warm immersion, thermal circumfl uence, compelled recycle and leakage, extraction of aroma oil and reclamation of organic solvent with the features of high efficiency and convenient operation. The cip cleaning system inside the tank meets with the gmp standard. With single gas cylinder and lock with dual-gas cylinder accompanied with a secure gas-lock cylinder. The complete device is easy to start and has a reliable self-lock performance. The programmed control eliminates the leakage or detachment caused from the unstable gas pressure for traditional structure with omplete security.
Seamless stainless steel pipe Features: 1. Commodity: seamless stainless steel pipe/tube 2. Process method: cold drawn/cold rolled 3. Surface finish: anneal/pickling/manual polish/ mechanical polish 4. Material: tp304, tp304h, tp304ln, tp304l, tp310/s, tp316l, tp316h, tp316/316l, tp317l, tp321/321h, tp347, s31803 and so on. 5. Standards: astm a312/213/269, din17457, en10216 , etc. 6. Size: A) nps: 1/8" to 10" B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10 C) o. D.: 6 mm to 219 mm D) w. T.: 0.5 mm to 25 mm 7. Length: max. 20 meters 8. Delivery conditions: annealled, picklinged and polished 9. Packing: seaworthy wooden cases/steel framed cases/ simple packaging 10. Certificate: iso 9001:2000, ped, tuv 9. Packing: seaworthy wooden cases/steel framed cases/ simple packaging
A)od: 10-219mm B)wt: 1-13mm C)standard: astm a249/a249m, astm a388/688m D)process method: cold drawn/cold pilgered E)type: austenitic Weaving bags/wooden cartons
Specifications: a) O.D.: 6 - 680mm b) W.T.:0.8 - 45mm c) Length: 4 - 16m Application: a) General service b) Fluid transport c) Pressure d) High and low temperature e) Structural f) Heat transfer g) Oil and gas service h) Ornamental i) Chemical and fertile Standards: GB, ISO, ASTM / ASME, DIN, JIS Material: stainless steel (316,316L,321,304(18-8),304L... ... Method: Cold Drawn / cold pilgered weaving bags