S.S 430 Coil and Strip Let over Stainless steel coil, sheet and circles, round plate; Type: 201, 202, 301, 304, 309, 310, 316, 409, 410, 430, Surface: 2B, BA, 8K, HL, No. 4; Thickness: 0.15~3.0 mm; Width: 7 mm~1250 mm; Dia.: 120mm~860mm. Customer's dimensions are available upon request.
Ded at the option of the manufacturer. Main steel tube grade: a53-a, a53-b etc. Other grade can also be provided after consulting with acustomers. Permissible variations in weight and dimensions: Weight -- the weight of the pipe as calculated from the relevant equation in asme b36.10m shall not vary by more than 10%. Diameter -- for pipe nps 1 1/2(dn40) and under, the outside diameter at any point shall not vary more than 1/64 in.(0.4mm) from the standard specified. For pipe nps 2 (dn 50) and over, the outside diamter shall not vary more than 1% from the standard specified. Thickness -- the minimum wall thickness at any point shall not more than 12.5% under the nominal wall thickness specified. The minimum wall thickness on inspection shall comform to the requirement. - According to astm a700
Din 2605-1/2615-1/2616-1/2617, din 28011, En 10253-1 Mss - sp - 75 - Into plywood case
Thickness:0.3-60mm; Width:1000-6000mm; Length:any length Moq:5 tons Thickness:0.3-60mm; Width:1000-6000mm; Length:any length Moq:5 tons
PVC, CPVC, PP Scheme 40 and 80 for chill and hot water
ZLYJ Series Gearboxes for Plastic and Rubber Single Screw Rod Extruder is a kind of special reducer researched and developed by importind the most advanced technology of the hard teeth-surface in the world. For recent ten years, they are widely used in top and middle grade plastic, rubber and chemical fiber extruders, sell well in the country and are exported abroad. With a higher reputation in the industry, it has features as follows: 1. The whole machine looks beautiful and liberal, and can be used both vertically and horizontally. It can suit multiple requirement of assembling. 2. The gear data and box structure are optimally designed by the computer. The gears are made of top grade low carbon alloy steel with Grade 6 precision of teeth after carbon penetrating, quench and teeth grinding. The hardness of the teeth surface is 54 - 62 HRC. The gear pair has stable running, low noisy and has high driving efficiency. 3. The assembling connector has the precision of radial run-out and end face run-out at international level, and can be easily connected with screw rod of the machine barrel. 4. The bearing structure of the output shaft has a unique style, which can effectively prolong service life of the bearings. 5. All standard parts such as bearing, oil seal, lubricant oil pump etc. are all top quality products selected from domestic famous manufacturers. They can be also selected from imported products as per requirement of customer.
Flanges: Range: 15 nb up to 600 nb in 150 lbs , 300 lbs, 400 lbs , 600 lbs , 900 lbs , 1500 lbs , 2500 lbs / table 2.5 , table 6 , table 10, table 16,table 25 , table 40, table 64, table 160, table 320, table 400 Form: Slip on , socket weld , blind , lapped , screwed , weld neck , reducing , spectacle ,slip on boss , plate , plate blank , screwed boss. Stainless steel: Astm / asme sa 182 f 304 , 304l , 304h, 309h, 310h , 316 , 316h , 316l , 316 ln , 317 , 317l , 321 , 321h , 347 , 347 h Duplex steel: Astm / asme sa 182 f 44 , f 45 , f51 , f 53 , f 55 , f 60 , f 61. Nickel alloy: Astm / asme sb 564 uns 2200 ( nickel 200 ) , uns 4400 (monel 400 ) , , uns 8825 inconel (825) , uns 6600 (inconel 600 ) , uns 6601 ( inconel 601 ) , uns 6625 (inconel 625) , uns 10276 ( hastelloy c 276 ) Astm / asme sb 160 uns 2201 (nickel 201 ) Astm / asme sb 472 uns 8020 ( alloy 20 / 20 cb 3 ) Copper alloy: Astm / asme sb 61 uns no. C 92200 & astm / asme sb 62 uns no. C 83600. Astm / asme sb 151 uns no. 70600 , 71500 , c 70600 ( cu -ni- 90/10) , c 71500 ( cu -ni- 70/30) Astm / asme sb 152 uns no c 10100 , c 10200 , c 10300 , c 10800 , c 12000, c 12200.
Stainless steel: astm a403 wp 304/ 304l/ 304h/ 316/ 316l/ 317/ 317l/ 321/ 310/ 347/ 904l etc. Carbon steel: astm a234 wpb / a420 wpl3/ a420 wpl6/ mss-sp-75 wphy 42/ 46/ 52 / 56/ 60/ 65/ 70 Alloy steel: astm a234 wp1/ wp5/ wp9/ wp11/ wp22/wp91 etc.
Manufacturer & exporter of stainless steel round/square/hex/wire/forged/bright/black in grade:201;202;303;304/l;316/l;317/l;309;310;321; 347; 904l;410;420;430 etc.... Sizes: 1)wire:0.1mm dia to 8mm dia. 2)round/suare/hex bar: Rolled:10mm dia to 200mm dia(black/bright) & Forged:100mm dia to 400mm dia. Quality: iso 9001:2008 certified company in exports. Weight: we are giving approx weight in our quotation & exact weight at the time of shipment.Ther is no compromise in weight & quality. Packing:as per the seaworthy export packing.
1)stainless steel butt weld fittings:astm a403 wp 304/l;h;316/l/h;317/l/h;309;310;321;347;904l etc.... 2)stainless steel screwed & forged fittings: astm a182 f 304/l/h;316/l/h;317/l/h;309;310;321; 347;904l etc.... In elbow:short/long/45deg/90deg/1.5d/3d;tee; reducing tee;con-reducer; nipple;coupling;dish end etc..Or as per your drawing or any big sizes. Packing: seaworthy;plactic bags;wooden boxs etc..
Round bars: Range: 3.17 mm to 600 mm dia. Stainless steel: Astm / asme sa 276 tp 304 , 304l , 309s , 309h, 310s , 316 , 316l , 316 ti , 317 , 321 , 347 , 410 , 420 , 430 ,431 , 440a ,b & c. , 446 Astm / asme sa 479 tp 304 , 304l , 304h, 309s , 309h, 310s , 310h , 316 , 316h , 316l , 316 ti , 317 , 321 , 321h , 347 , 347 h , 410, 430 ,431 & 444. Duplex steel: Astm / asme sa 276 uns no. S 31803 , s 32205 , s 32550 , s 32750 , s 32760. Nickel alloy: Astm / asme sb 160 uns 2200 ( nickel 200 ) / uns 2201 (nickel 201 ) Astm / asme sb 164 uns 4400 (monel 400 ) Astm / asme sb 425 uns 8825 (inconel 825) Astm / asme sb 166 uns 6600 (inconel 600 ) / uns 6601 ( inconel 601 ) Astm / asme sb 446uns 6625 (inconel 625) Astm / asme sb 574 uns 10276 ( hastelloy c 276 ) Astm / asme sb 472 uns 8020 ( alloy 20 / 20 cb 3 )
Stainless steel: astm a312 tp 304, 304l, 304h, 316, 316l, 317, 317l, 321, 310, 347, 904l etc. Ferro alloy: monel, nickle, inconel, incoly, titanium etc. Seamless & welded pipes & tubes in all sizes. Alloy steel: astm a234 wp1, wp5, wp9, wp11, wp22,wp91 etc.
Type:sorf, blrf, wnrf, solj, table:d, e, f & class:150# to 3000#. Stainless steel: astm a 182 f 201; 202; 303; 304/l/h; 316/l/h; 317/l/h; 309; 310; 321; 347; 904l etc... Quality: ISO 9001:2008 certified company in exports. Packing: export seaworthy packing first in plastic bags & than in export quality wooden boxs with thermocol.
First gabion is a professional vendor of wire coils established in 2008 in chinaï¼?we are capable of manufacturing and supply industry wires from china to europe for many years, we focused on our jobs to the highest standards both in technology and services. So far china could control the best fabricating technology in low price for: 1- steel wire with low (electrion )galvanized wire 8g/m2 - 15g/m2, & high (hot dipped) galvanized wire (40g/m2 - 450g/m2) with or without pvc coating 2- 10% alu-zinc galfan wire. 3- stainless steel coil wire. 4- wire mesh products in woven & weld facilities, we handle most popular manufacturing technologies to ensure quality anti-rusty & strenthen the functions. The diameter of the wire is from 0.5mm to 5 mm. The diameter of packed coils is from 10 cm to 45 cm. We have different pvc color to choose Pe wire is also available. Weight of our wire are from 50g to 100g, 500g to 1kg, to 10kg and 20kg, we accept client's specifics. Custom printing & packing services ( design in our side or client self design with ps drawings ) is available, material is upon sample or futher discussions. No limited quantity, we use loose cargo shipping or container shipping where we could consolidate ( collecting different cargo ) into. During the decades' work we 've accumulted a lots of experiences in the process of manufactruing to avoild defective items and faulty products caused by either inadequency of tech methods or management neglegence. Our freight forwarders 's working with us for more than 10 years we could ensure the best price and quickest time to deliver to your port or door. Lead time is around 10-15 days & shipping days is normally 35-45 days in cif terms, the most popular way of our sevices. Optium quality/price performance ratio & integrated working value is our core competence. -
o 304 Stainless Steel Rod
SEAMLESS CARBON STEEL / STAINLESS STEEL BUTT-WELDING PIPE FITTINGS Types: Elbow 45, Elbow 90, Elbow 180, Equal Tee, Reducing Tee, Concentric Reducer, Eccentric Reducer, Cap and etc. Spec. standards: ANSI B16.9, ANSI B16.28; JIS B2311; DIN 2605, 2615, 2616, 2617 Material standards: ASTM A 234 WPB, JIS G3452, DIN 1629, SS304, SS316 Nominal pipe size: 1/2INCH to 48INCH(DN15 to DN1200) Wall Thickness: SCH20, STD, SCH40, XS, SCH80, XXS, SCH160, SGP
Forged Steel Valves Range: gate valves, globe valves, check valve, Y-type globe valves, and Y-type check valves Type: flange ends, inner screwed ends, and socket welding Class: 150 to 600lbs, 900 to 1,500lbs, and 2,500lbs Design: ASME/ANSI B16.34, API 600, and API 602 Ends connection: Flange dimension: ASME/ANSI B16.5 (RF) SW dimension: ANSI B16.11 Screwed dimension: ANSI B16.20 BW dimension: ANSI B16.25 Structural feature: Bolt bonnet (BB), outside screwed, and yoke (OS and Y) Welded bonnet (WB), outside screwed, and yoke (OS and Y) Pressure-in bonnet (PS), outside screwed, and yoke (OS and Y) Body material: A105, F304, F304L, F316, and F316L Inspection and test: API 598, API6D, CE, and ISO9001
TYPE: 1PC, 2PC, 3PC ENDS: NPT / BSPT / DIN2999 THREADED, FLANGED, BUTT-WELDED, SOCKET WELDED REDUCED / FULL BORE SIZE: 1/4 INCH - 4INCH WORKING PRESSURE: 1000 PSI, PN16, PN40 OPTIONAL LOCKED DEVICE HANDLE MATERIAL: BODY / BALL: SS304, SS304L, SS316, SS316L SEAT: PTEFE STEM / NUT: STAINLESS STEEL
Materials: ASTM A105, RST37.2, C22.8, ASTM A181, ASTM A182, and ASTM A350 Standards: ANSI/ASME B16.5 and ANSI/ASME B16.47, DIN2527, DIN2573, 2576, 2502, 2527, 2673, 2674, 2675, 2676, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2630, 2632, 2633, 2634,2635, 2636, 2637, 2638, 2565, 2566, 2567, DIN86029, 86030, BS10, BS4504, UNI, JIS2220, EN1092. Working Pressure: Class: 75, 150, 300, 600, 900, 1,500, and 2,,500lbs; PN6, PN10, PN16, PN25, PN40, PN64, PN100; 5K,10K, 16K, 20K, 30K Types: slip-on, welding neck, blind, threaded, lap joint, and socket weld Size: NPS 1/2 to 60 inches Facing: RF, FF, and RTJ Painting: black paint, varnish paint, and golden paint Manufacture Process: Forging or Casting
Design and manufacture: ASME/ANSI B16.11, B 1.20.1, MSS SP-79, 83, and JIS B 2316 Types: union, 45 and 90 degree elbow, tee, cap, coupling, nipple, bushing, plug and half-thread short pipe Ends: socket weld and threaded NPT Nominal diameter: NPS 1/8 to 4 inches (DN6 to DN100) Working pressure: Threaded: 2,000, 3,000, and 6,000lbs Socket weld: 3,000, 6,000, and 9,000lbs Materials: ASTM A 105, ASTM A 182 F304, F304L, F316, and F316L
