We offer high quality talc powder that is a metamorphic hydrated magnesium silicate with a soapy feel and pearly luster. Its lamellar structure and the platy ness give excellent results to the products. Composites filled with talc enhance the performance properties of the compound. It exhibits higher stiffness, creep resistance at both ambient and elevated temperature. It has a greasy feel. Hydrous magnesium silicate powder is the basic raw material for pp, ld, hdpe compounding, paints industries, paper industries, rubber, pharmaceutical industry, pvc, cosmetic, baby talc powders, and many more.Talc is used in many industries such as paper making, plastic, paint and coatings, rubber, food, electric cable, pharmaceuticals, cosmetics, ceramics, etc. A coarse grayish-green high-talc rock is soapstone or steatite and has been used for stoves, sinks, electrical switchboards, crayons, soap, etc. It is often used for surfaces of lab counter tops and electrical switchboards because of its resistance to heat, electricity and acids. Talc finds use as a cosmetic (talcum powder), as a lubricant, and as a filler in paper manufacture Application of talc Soaps & detergents ( fmcg ) Additive master batches for paper like lldpe & hm, hdpe films Additive master batches for pp & hdpe box strapping Paints and rubber plastics Paints & powder coatings Paper Rubber Ceramics Printing ink & inorganic pigments Agro chemicals
We are actively engaged in providing high quality dolomite powder. The dolomite powder promises high degree of purity, wet ability and whiteness. Known for its compressive strength, the dolomite powder is fire resistant and solid. Moreover, the dolomite powder has long shelf life which leads to its high demand in the market. Providing high quality minerals, we are reckoned as prominent dolomite powder manufacturer, exporter and supplier. Dolomite is the name of both carbonate rock and a mineral (formula: caco3 mgco3) consists of a calcium magnesium carbonate. It contains 30 % of cao, 21% of mgo and 49% of co2. This exclusive grade of super snow white dolomite is available near udaipur only. The whiteness of this grade is up to 98%. This dolomite powder is suitable for paints, detergents, plastic compounds and as filler in plastic reprocessing approximately Application Soap & detergent, Leather cloth industry Cable industries, Rigid pvc pipes Iron, steel, and ferro-alloys industries Paints, inks, Powder coating, Ceramic industry Rubber industry, Glass industry
Description Surface-treated, very fine calcium carbonate powder with good dispersion properties.Manufactured from a high purity. White calcite lumps Chemical analysis of the raw material Caco3 : 99.00% Mgco3 : 0.20% Fe2o3 : 0.01% Hci insoluble content : 0.50% Specific product data Fineness Residue on a 45 µm sieve (iso 787/7) : nil Top cut (d97%) : 10.00 µm Men particle size (d50%) : 2.30 µm Particles < 2 µm : 22% Whiteness Reflectance laserophot : 98.50% Moisture ex works (iso 787/2) : 0.10% General product data Bulk density (t) : 0.85 g/ml Ph value (iso 787/9) : 8.5 Oil absorption (iso 787/5) : 22 g/100g Dop absorption (iso 787/5) : 24 g/100g Particle size distribution (malvern mastersizer 2000) Application Soap & detergent Leather cloth industry Cable industries Rigid pvc pipes Iron, steel, and ferro-alloys industries Paints, inks, powder coating Ceramic industry Rubber industry Glass industry
Iron oxide red Iron oxide yellow Natural iron oxide
1.6mm nial95/5 alloy wire for thermal spray wire Nickel aluminum 95/5 Introduction Nickel aluminum 95/5 thermal spray wires can be use as bond coatings and for machine element restoration widely. The materials show an exothermic reaction during the spray process, also can produce dense coatings with exceptionally high bond strengths that self-bond to most metallic substrates and can tolerate elevated temperatures and oxidizing atmospheres.Wisdom brand nickel aluminum 95/5 thermal spray wires can equivalent to: tafa 75b, sulzer metco 8400. Typical uses and applications Bond coatings under ceramic top coatings. Build-up of machinable carbon steel and corrosion-resistant steels. Under the condition of high temperature and low temperature as the fretting resistance. High-temperature anti-corrosive coating. Product details Chemical composition: Nominal compositionAl %Ni % Min4.5 Max Bal. Specifications: GradeGePwa Nickel aluminum 95/5B50tf5636937 Physical properties: GradeDensityMelting pointElectrical resistivity at 20°c o mm2/m Nickel aluminum 95/58.2 g/cm31430°c0.42 Typical deposit characteristics: Typical hardnessBond strengthDeposit rateDeposit efficiencyMachilityineab Hrb 759500 psi 10 lbs /hr/100a60-70%Good Standard sizes & packing: Diameter Dimension tolerancePackingWire weight 1/16 (1.6mm)+ 0/-0.05D 300 spool15kg((33 lbs)/spool Other sizes can produced based on customers' requirement.
Wisdom420 is a 420 stainless steelwire, specifically designed forarc spray processes. Wisdom 420 forms a dense, well bonded coating, with excellent wear resistance and good corrosion resistance. It is widely used for machine elements repair, dimensional restoration, and wear resistant application. Wisdom 420's low shrink rate characteristics, allows for increased coating thick nesson parts requiring heavier coatings.. Typicaldeposit surfacepreparation: •typicalhardness hrc40-45 •bondstrength 6500psi •depositrate 10lbs /hr/100a •depositefficiency 70% cleaning. •wirecoverage 0.8oz/spft2/mil •surfacetexture *variable •corrosionresistance good Chemicalcomposistion(wt%): Cr c mn si ni fe others 13.0 0.35 0.6 0.5 0.5 bal 0.54 Recommendedsprayparameters: Diameter airpressure voltage amperage standoff 1.6mm 50 -60 psi 28-30 100-200 4- 6 in (10-15cm) *parametersaretypicalandmayvarydepending onequipmentused.Contactyour equipmentmanufactureforoptimumsprayparameters. Standardsizes&packaging: Diameter Dimension Packing Wire weight Tolerance 1/16"(1.6mm) +0/-0.05 D 300 spool 15kgs(33 lbs)/spool 2.0mm +0/-0.05 D 300 spool 15kgs(33 lbs)/spool 1/8"(3.17mm) +0/-0.05 Coil form 20-400kgs/coil
Amine-terminated polyether Zhengda® zd-123 Zhengda® zd-123 amine-terminated polyether is characterized by repeating oxypropylene units in the backbone.As shown by the representative structure, zhengda® zd-123 amine-terminated polyether is a difunctional, primary amine with an average molecular weight of about 230. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chain. Applications Epoxy curing agent Reacts with carboxylic acids to form hot melt adhesives Reacts quickly with isocyanates Salts may be formed readily for surfactant use Benefits Low viscosity, color and vapor pressure Completely miscible with a wide variety of solvents, including water Provides tough, clear, impact resistant coatings, castings, and adhesives Coatings are free of surface blush prevalent with many amine curing agents Sales specifications Property specifications Appearance colorless to pale yellow liquid With slight haze permitted Color, pt-co 25 max. Primary amine, % of total amine 95 min. Total amine, meq/g 8.1 – 8.7 Water, wt% 0.25 max. Additional information Ahew (amine hydrogen equivalent wt.), g/eq 60 flash point, pmcc, °c (°f) 121 (250) Equivalent wt. With isocyanates, g/eq 120 ph, 5% aqueous solution 11.7 Viscosity, cst, 25°c (77°f) 9.5 refractive index, nd20 1.4466 Density, g/ml (lb/gal), 25°c 0.948 (7.90) vapor pressure, mm hg/°c 1/100 Cas number 9046-10-0 10/133 Products packaged/shipped Drum 195 kgs net wt. Iso tank appro. 23, 000.00 kgs net wt. Ibc 942 kgs net wt.
Amine-terminated polyether Zhengda® zd-140 Zhengda® zd-140 amine-terminated polyether is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, zhengda® zd-140 amine-terminated polyether is a difunctional, primary amine with average molecular weight of about 430. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains. Applications Epoxy curing agent that provides increased flexibility and toughness Used in polyurethanes, polyureas, and thermoplastic polyamide adhesives Salts may be formed for use in cutting fluids Benefits Low viscosity, color and vapor pressure Completely miscible with a variety of solvents Sales specifications Property specifications Appearance, 25°c colorless to pale yellow liquid With slight haze permitted Color, pt-co 50max. Primary amine, % of total amine 95 min. Total amine, meq/g 4.0 – 4.6 Water, wt% 0.25 max. Additional information Ahew (amine hydrogen equivalent wt.), g/eq 115 ph, 5% aqueous solution 11.6 Equivalent wt. With isocyanates, g/eq 230 refractive index, nd20 1.4482 Viscosity, cst, 25°c (77°f) 22 vapor pressure, mm hg/°c 1/165 Density, g/ml (lb/gal), 25°c 0.972 (8.10) 10/193 Flash point, pmcc, °c (°f) 163 (325) cas number 9046-10-0 Products packaged/shipped Drum 200 kgs net wt. Iso tank appro. 23, 000.00 kgs net wt. Ibc 1000 kgs net wt.
Feature: -- Front door; -- Compressor system is at the back 1. Material :All inside and outside is stainless steel 304. Stainless steel for inner & outer layer, also for the trays. 2. Compressors:High quality compressor, the Germany High quality compressor is Optional,each compartment has a separate temperature controller and a separate compressor system 3. Power: 220-240V/50Hz-60Hz, back up power (UPS) can supplier according to customer’s requirement. 4. 7 system failure alarms 5. High quality temperature control system. The large control panel and console, easy to operate. The inside room temperature is from 0 to -5?(±0.1?). And the temperature is -18?to 10? adjustable 6. Door Frame with a unique one-piece design, simple and easy to clean. Door seal belt can be replaced 7. USB interface, temperature record system is Optional.
Feature: -- Front door; -- Compressor system is at the back 1. Material :All inside and outside is stainless steel 304. Stainless steel for inner & outer layer, also for the trays. 2. Compressors:High quality compressor, the Germany High quality compressor is Optional,each compartment has a separate temperature controller and a separate compressor system 3. Power: 220-240V/50Hz-60Hz, back up power (UPS) can supplier according to customer’s requirement. 4. 7 system failure alarms 5. High quality temperature control system. The large control panel and console, easy to operate. The inside room temperature is from 0 to -5?(±0.1?). And the temperature is -18?to 10? adjustable 6. Door Frame with a unique one-piece design, simple and easy to clean. Door seal belt can be replaced 7. USB interface, temperature record system is Optional.
thermal spray wire TAFA 97 is a solid wire specifically designed for arc spray systems. It is a titanium and tungsten carbide alloy in an amorphous matrix. TAFA 97 produces a hard, abrasive and corrosion resistant coating, with a service environment of up to 1000° F. TAFA 97 is used in a wide variety of industrial high wear applications. Packaging & Shipping Packaging:Products are generally supplied in standard cardboard boxes, pallets, wooden boxes. Special packaging requirements can also be accommodated. (also depend on the customers' requirements) For the Thermal spray wires , we pack the wires on spools. Then put spools into cartons, Then put the cartons onto pallet. Shipping: We cooperation with many logistics company,We can provide express, sea transportation, air transportation, and rail way transportation based on customers' requirement. Our Services 1) We can provide a free sample for testing. 2) Customized lable, packing, OEM service 3) Mill test certificate will be provided after production, If it is necessary. 4) Good packing methods to keep goods no damage during delivery 5) We are cooperation with many famous forwarder, will try our best to choose the safty, convenience, quick, and cheap mode of transportation for our customers. Company Information: Capacity and Main markets. Our company has more than 20 years of experience in alloy products. The company covers 10000m2.The annual output reaches 5000 tons. The products apply to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area widely. In china, we mainly do business with army industry, and for worldwide, our selling net-work has expanded to Russia, Ukraine, Germany, Iran, India, Itlay, America etc. Quality Assurance. According to international standard, we introduce new techniques and new processes, so we can keep improving product quality. There are strict processes and quality manages to make sure the products keep updated, and be well received by users. Equipment. Our major equipment, vacuum induction furnace, intermediate frequency induction furnace, electroslag furnace, skanthal A1 bath furnace, wiredrawing units, heat treatment production line and soon. Test equipment: straight reflection spectrograph , spectrometer , chemical analyse lab , machinery properties lab (omnipotent test machine,hardness test machine inside), also metallography laboratory, ultrasonic harmless test,etc. FAQ Product: What is your min order? For the Thermal spray wire, Our min order is 15kg . What is the wire weight of each spool? The wire weight of each spool is around 15kg, also can be produce according to customers' requirement. Whether can you provide a Mill Test Certification? We can provide a Test certification after production.
2-methylimidazole 693-98-1 C4h6n 82.1 White to offwhite crystalline powder =99.0% 1. used to produce medicine intermediates such as metronidazole and dimetridazole. 2. used as curing agent for epoxy resin and auxiliary agent for textile dyes. 3. used in additive of foamed plastics. 25kg/carton drum
1-methylimidazole 616-47-7 C4h6n2 82.1 Colorless to faint yellow transparent liquid =99.0% Intermediate of organic synthesis, resin curing agent and cohesive, etc Plastic drum/net weight: 25kg or 200kg
Hubei aging chemical co., ltd, is the largest manufacturer and exporter of lignosulphonate & sodium gluconate & sodium naphthalene sulfonate formaldehyde in middle china, with the output over 3, 000 metric tons every month for each kind . Sodium gluconate (sg99%) ?properties?: white crystalline granule or powder, easy to dissolve in the water ?molecular formula?: c6h11o7na ?molecular weight?: 218.14 ?quality standard ? index items standard value test results appearance white crystal powder meets the requirement purity =99% 99.2% ph value 6.0—8.0 6.70 sulphate =0.05% 0.03% chloride =0.04% 0.04% lead, ug/g =2% 1.38% loss on drying =0.5% 0.21% reducing substances =0.7% 0.38% ?uses? 1.It can be used as food additives. 2.It can be used as water quality stabilizer because it has excellent inhibiting capacity to scale. 3.It can beused as surface cleaning agent of metal 4.It can beused as cleaning agent of glass bottle 5.It also can be used as water reducing agent and retarder in the building & construction industry. ?packing, storage & transportation? 1, packing: 25kg/bag or 1mt/big bag. 2 , storage: kept in dry and ventilating place, prevent from rain and moisture when storage; If agglomerated, please crush and make it into solution, and its effect will be the same. 3 , transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train.
STANDARD Heavy Hex Structure Bolts A490M GRADE A490M 10S DAIMETER M12-M36 SURFACE TREAMENT Black, Dacromet. etc. MATERIAL Alloy steel ,40Cr, 35CrMo, B7,etc
Standard Hex head cap screw sae j429 Grade Gr.8 Size 1/4"-1-1/2" Surface treament Black, zinc plated, zinc (yellow) plated, h.D.G. Etc. Material Carbon steel, alloy steel , stainless steel, etc
Standard Flange Bolts DIN6921 Grade CL8.8 Size M6-M36 Surface Treament Black, zinc plated, zinc (Yellow) plated, H.D.G. etc. Material Carbon steel, alloy steel ,stainless steel,etc
Standard Heavy hex structural bolt astm a325 Grade A325 type 1 Size 1/2"-1-1/2" Surface treatment Black, zinc plated, zinc (yellow) plated, h.D.G. Etc. Material Carbon steel, alloy steel , etc Packaging Bulk packed in the 25kgs carton then 900kgs pallets
Standard Guard rail bolts astm a307 grade a with guard rail nuts sae j995 grade2 Grade A307 grade a and sae j995 grade2 Size3/4" Surface treament H.D.G. Material Carbon steel
Standard Heavy hex structural bolt astm a325m 8s Grade A325m 8s Size M12 to m36 Surface treatment Black, zinc plated, zinc (yellow) plated, h.D.G. Etc. Material Carbon steel Packaging Bulk packed in the 25kgs carton then the 900kgs pallet
