The light duty of ladder truss, triangular truss, and square truss has standard size as 250 x 250mm, and 300 x 300mm. The medium duty trusses have 400 x 400mm, 450 x 450mm, and 450 x 600mm. The heavy duty trusses have the sizes of 500 x 600mm, 520 x 760mm, and 520 x 1, 000mm. The length is 0.5 - 4.0m. If the square truss overtop is 400 x 400mm, there are two connecting ways: one is square connector, the other is aluminum board connector. The main tube is made of 50mm, the inside tube is made of 30mm. The light duty uses 20mm, which has large loading capability for using in heavy project.
Used for pre-filtering and terminal fine filtering of the mediums as thin liquid, air, soup, pure water etc.
Flow:0.5m3/h-30m3/h
Filter precision ¦0.1-20ª8m
Filter elements have two connecting forms as insert-type 226seat and flat mouth type 226 seat.
Filter element: 5, 10, 20, 30
Filter element can adopt polypropylene, nylon, ptef etc.
Drum adopts aisi304 or aisi316l material, inner and outer surfaces adopt polishing, surface roughness ra<0.4ª8m
The device is to concentrate the material in the occasions such as china traditional drugíwest drugídextroseíamylum sugaríoral liquidíchemistryífoodstuffímonosodium glutamate and milk product and to reclaim the industrial organic solvent such as alcohol.It is suitable to concentrate the thermal sensitive material under lower temperature and vacuum with little batch number and multiple varieties.
Feature and profits
1.Alcohol reclamation: large reclamation capacity and the vacuum concentration procedure make it's production capacity five to ten times of that of the old counterpart and can lower the energy consumption for 30%, featuring little investment and high reclamation profit.
2.Cocentrated liquid material: the device uses the modes of outer-heated natural cycle and vacuum negative pressure evaporation featuring swift evaporation with concentration proportion of 1.3; the liquid material concentrates without bubble under full seal state. The drug liquid after concentration by the device features non-contamination and thick drug taste and easy cleaning(it is just to open the up and down cover for cleaning.). The device is easy to handle and it needs a little foundation area for installation. The heater and evaporator use stainless steel for thermal purpose.The polyurethane is used as the thermal material. The surface is treated with sand grinding and surface polishing, meeting with the gmp tandard.
The device is to service at such industries as china traditional drug, foodstuff and chemistry for the technologies such as normal pressureíómini pressure, water decocting, warm immersion, thermal circumfl uence, compelled recycle and leakage, extraction of aroma oil and reclamation of organic solvent with the features of high efficiency and convenient operation. The cip cleaning system inside the tank meets with the gmp standard.
With single gas cylinder and lock with dual-gas cylinder accompanied with a secure gas-lock cylinder. The complete device is easy to start and has a reliable self-lock performance. The programmed control eliminates the leakage or detachment caused from the unstable gas pressure for traditional structure with omplete security.
Specifications:
a) O.D.: 6 - 680mm
b) W.T.:0.8 - 45mm
c) Length: 4 - 16m
Application:
a) General service
b) Fluid transport
c) Pressure
d) High and low temperature
e) Structural
f) Heat transfer
g) Oil and gas service
h) Ornamental
i) Chemical and fertile
Standards: GB, ISO, ASTM / ASME, DIN, JIS
Material: stainless steel (316,316L,321,304(18-8),304L... ...
Method: Cold Drawn / cold pilgered
Standards
Astmbsdin
1.A 1792.A 1923.A 210 ( gr.A1 / gr.C )4.A 333 ( gr.1 / gr.6 )5.A 334 ( gr.1 / gr.6 )6.A 335 ( t5, t11, t12, t22 )7.A 106 ( gr.B )8.A 213 ( p5, p11, p12, p22 )9.A 209 ( gr.T1 / gr. T1a )10.A 199 ( t5 )11.A 556 ( gr. C )1.3059 part û i gr. 320 2.3059 part - ii gr. 3603.3059 gr.4404.3602 part û i cfs 3601.2391 st-35, st -45, st û 52)2.2391 /c ( st-37.4, st -52.3, st-37.03.17175 ( st-35.8, st 45.8, 15 mo 3, 10 cr mo 910, 13 cr mo 44 )
Enis
1.10305 û 1 & 102042.10216 û 2 3.10287 û 1 1.1239 ( heavy, medium )2.3074 ( cds1, cds3 )
Features:
1) commodity: seamless stainless steel pipe/tube
2) process method: cold drawn/cold rolled
3) surface finish: anneal/pickling/manual polish/ mechanical polish
4) material: tp304, tp304h, tp304ln, tp304l, tp310/s, tp316l, tp316h, tp316/316l, tp317l, tp321/321h, tp347, s31803 and so on.
5) standards: astm a312/213/269, din17457, en10216 , etc.
6) size:
A) nps: 1/8" to 10"
B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10
C) o. D.: 6 mm to 219 mm
D) w. T.: 0.5 mm to 25 mm
We are a composite can manufacturer, our paper containers are attractive, environmental friendly, functional and very economical. They are extremely versatilein metting today's packaging requirements. Many sizes are available. We offer a wide variety of options and closures, including metal stamping, along with various labeling alternatives, creating a truly unique package.
The body construction is paperboard, in various thickness and sizes. Depending on your product, you may choose from number of protective inner liner barriers.
Advantages of composite can:
Light weight.
Easy opening without any aids.
Optimum access to the contents, no sharp edges on opening.
Re-closable with a plastic cap.
High stability.
Environmental friendly.
Useful for:
Snacks.
Cappucino, tea, cocoa.
Biscuits.
Dry herbs and spices.
Dry pet food.
Cereal.
Other instands products.
Gift box. Etc.
