Flanged concentric disc butterfly valve. 2.Package of valve A.Standards export package B.Bubble bag,plastic bag C.Wooden case D.All the package material are environment
Cast steel flangeconcentric disc butterfly valve. A.Standard Export Packing. B.bubble bag,plastic bag C.woodencase as perthe customers' request
Tensile Strength Type : Tensile in kg/mm2 Soft : 60 : 75 1/4 Hard : 75 - 90 ½ Hard : 90 -140 Full Hard : 140 -200 or ASTM A 313 / DIN 17224. - HDPE wrapped coils of 20 kg to 250 kg - Pattern laid coils on MS carriers / spiders (200 kg to 1000 kg) - Coils on wooden pallets (100kg - 800 kg) - Cheese coils ( 500 kg - 1000 kg) - Drum Packing - Fine wire in Spools from Din 80 - Din 250
Diameter Tolerance +/- 0.050 mm Tensile strength 65 kg / mm2 max. HDPE wrapped coils of 300 kg to 500 kg
Tolerance:h9,h10,h11,ASTM 484 or as per requirement. Shapes :Round Length :3 / 4 / 6 meters (12 / 14 / 20 ft.) Length Tol:0/+200mm (-0/+1ft) or as per requirement. As a customer requirement.
Stainless steel pipes 1.Material:201/202/304/304l/316l/309s/310s/321/2205/904l... 2.Wall thickness:1-100mm or on your request 3.Od:6-1020mm or on your request. Woven band£»according to your required
SIZE:1220MM*2440MM/3048MM THICKNESS:0.3-3.0MM. Mirror plates can be processed from grade #201, #304, #409, #410 and #430 cold-rolled stainless .
And we offer a large range of etching patterns for your preference. The most depth from j.F.Y. Is 100c ( micron ) with a thickness of 0.6-3.0mm and width of 1, 000-1, 219mm. Wooden crate for package
Pvd-coated sheet are formed from the plates that are subject to mirror, hairline, Etching or sanding treatment cold-rolled stainless steel with a thickness of 0.4-3.0mm and width of 1, 000-1, 219mm. There are seven (7) kinds of colors we can offer: Golden, black, rose gold, bronze, champagne, coffee, and brass
It 's reflecting orderly line after being processed , we can make hairline deeper and filamentous. The feature is good looking and in common use everywhere. Hairline finsih can be processed from grade #201, #304, #409, #410 and #430 cold-rolled stainless steel with a thickness of 0.4-3.0mm and width of 1, 000-1, 219mm.
We can offer you various of patterns, such as: linen, square, elephant-skin, free pattern, and so on. Width within 1240mm in both coil and sheet.The thickness from 0.4mm-3.0mm.There are ba embossing and 2b embossing. The main advantages: durable appearance, durable use, durable attrition, and a excellent effect for decoration.
Stainless steel wire manufacturer and exporter in china. 1.Standard:gb/t 4240-2009 , gb/t 4232-93 2.Material of stainless steel wire :201, 202, 301, 302, 304, 304l, 316, 316l, 321, 430 etc. 3.Standard:aisi, astm, en, din, jis 4.Stainless steel wire type: round wire, flat wire, square wire, triangle wire, hexagonal wire, sector wire, trapezoid wire, heterogeneous wire 5.Wire diameter of stainless steel wire :0.15mm-4mm 6.Tensile strength: >520mpa 7.Elongation rate: >40% 8.Characteristics of stainless steel wire: (1)excellent straightness, uniform and beautiful surface condition (2)excellent coil-forming ability, high elasticity and high fatigue resistance (3)strong corrosion resistance against exposure to the toughest atmosphere 7.Forming supply:in the form of coil, spool, or can be processed into cut wire and u type wire. 8.Packing of stainless steel wire:packed in coil:1.Inside with plastic film and outside with hessian 2.Inside with plastic film and outside with woven bag. Packed in spool: spool specification according to customer's requirements 9.Full packing: (1)coil packed in pallet.25kgs/roll, 50kgs/roll, 100kgs/roll or can be according to customers requirement. (2)spool packing: each spool could load 1.0kg, 2.0kg, 3.0kg, 5.0kg, carton packing, outside wooden pallet or wooden cases . 10.Application of stainless steel wire:barbed wire, soft pipe, woven mesh, spring, nails, brush, wire rope, Cleaning bal. 1.Packing of stainless steel wire: Packed in coil:(1).Inside with plastic film and outside with hessian (2)inside with plastic film and outside with woven bag. Packed in spool: spool specification according to customer's requirements 2.Full packing: (1)coil packed in pallet.25kgs/roll, 50kgs/roll, 100kgs/roll or can be according to customers requirement. (2)spool packing: each spool could load 1.0kg, 2.0kg, 3.0kg, 5.0kg, carton packing, outside wooden pallet or wooden cases .
304/304L,316L,321,310S stainless steel sheet.
304 stainless steel Sheet/Plate.
Helical gear motor feature Drive motor power(p1) y/y2 induction motor, 0.12kw~180kw Voltage scope(v) 110v~660v or make specially according to clients’requirement. Phase single(under 3kw) or three Pole 2 or 4 or 6 or 8 or 10 Motor speed(n1) relys on motor pole:650r/min~3000r/min Frequency 50hz or 60hz or 50/60hz Ip ip54 or ip55 or make specially according to clients’ requirement. Terminal box 0º or 90º or 180º or 270º, any position is allowed Connect method direct type, if client’s convenient to replace motor, please consider to add extra motor adapter. Ratio scope(i) 3.2~264, if client want bigger ratio, please consider combination type. Rated torque(n.M) 72n.M~14800n.M Output speed(n2) depends on motor pole: n1/ratio(i), n2=0.06r/min~1090r/min Service factor(fs) 1.2~5.0 Mount type foot and shaft mount Different type, different size, once confirm type well, we will provide detailed packing information.
Shandong yonghe europe ltd is the european distribution subsidiary of china's premier quality producer of stainless steel investment castings. Our factory is a high-tech facility, having the latest state-of-the-art equipment in over 200000 square metres of workshop space. We are currently supplying some of europe's largest companies in a variety of industries, such as automotive, pumps & valves, etc. Our factory is certified ISO9001, ISO/TS16949, PED97/23/ec. Best quality is complemented by competitive pricing, low tooling costs, jit delivery capability, ddp delivery and open credit terms (subject to status).
The stainless steel sheet Standard Astm, aisi, gb, jin, en Material201, 201, 301, 304, 304l, 310, 310s, 316, 316l, 317 SpecificationThickness 0.1-100mm Width 8-2400mm Production technologyHot rolled(3.00-100mmm) Cold rolled(0.1-4.0mm) Surface treatmentNo.1, no.2no.3, no.4, 2b, 2d ba, hl, 8k, 16k no.240, no.320.No.400 gold plating, etched Stainless steel plate can be non-standard ordered. Material201, 201, 301, 304, 304l, 310, 310s, 316, 316l, 317 SpecificationThickness 0.1-100mm Width 8-2400mm
Stainless steel flanges of 304, 304l, 316, 316l etc. Weld neck, loose flanges, socket weld, blind etc. If you can give us the drawings, we can produce it for you according to your requirements. Fumigated wooden case+plastic bags
304 stainless steel sheet 1. Standard: aisi jis, din etc. 2. Tk:0.4-40mm 3. L:1-11.8m 4. Surface:2b, ba etc. Standard export packing or as customer's requirement.
Stainless steel full bore ball valve, SS gate valve, SS stop (global) valve), SS check valve, SS exhaust valves, SS Y strainers. Standard export packing, suitable for long distance ocean freight.
