General technical data
Mode Output
Display panel Color LCD
Keypad 3 membrane push buttons
Audio 85 dBA 30 cm
Power, Radio, Auto Differing
Tone for each mode
Transmitter Modes
Same tone
Battery type 7.4 V Li-Ion pack
Typical operating time 15 hours constant use at 20 C/68 F
Dimensions 93 x 290 x 765 mm/3.66 x 11.42 x 30.12 inches
Weight (incl. batteries) 2.7 kg with Li-ion
Temperature Operating -20 C to 50 C, -4 F to 122 F
Storage -40 C to 70 C, -40 F to 158 F
Protection against water, dust and sand Conforms to IP66
Humidity 95% RH non condensing
The effects of condensation are to be effectively counteracted by periodically drying out the product.
Leica Detect DD220 (Device Only) - Article number: 850268
Leica Detect DD220 Smart Package - Article number: 6011593
Leica Detect DD220 Plumbers Package - Article number: 6014160
In The Box
Leica Detect DD220
DD220 Smart utility locator
Three year warranty
Li-Ion battery pack
A100 charger
A140 - car adapter cable.
Dimensions: 280 mm 198 mm 80 mm
Weight: 2kg
Connectors:
- Power supply and data transfer: USB
- Output: HDMI and LAN
- Ultrasonic transducers: 2 Lemo 00
- Eddy current probes: Fischer 16cts
- Position encoders inputs ( 4): Fischer 12cts
Analog signal output: no
Standards: UT 22232-1et EN 15548-1:2008 CE marking
Indoor and outdoor use
Temperature intervals: -10 C Â 45 C
Relative humidity in operation 30 % to 80 % (without condensation)
Protection index: IP54
Power: 100-240 V AC 50/60 Hz 1.6-0.9 A
Degree of pollution: 2
Circus upgrade - in box; DIY LP12 tune-up and setup jig; DB Systems cartridge alignment protractor; CartAlign cartridge alignment protractor; 2x original Linn felt mats; Ken Peterson Litz 1m tonearm cable.
FEATURES:
Double chassis, suspended pendulum subchassis
Damped subchassis
60 mm thick massive acrylic/vinyl platter of high inertia
Screw-down record clamp, compatible with standard and 180g audiophile pressings
Inverted oil-pumping bearing
Custom arm boards available for most tonearms
High-quality standalone DC motor with tacho feedback speed control
Orbe Controller NC motor power supply with Never-Connected circuit
Easy-access door for fast battery changes without breaking the calibration seal
Analog bar graph for fast changing or unstable signals
Large digit display with bright, two-level backlight for easier reading in low light
Touch Hold keeps readings on display even after removing probes
This DEWALT® 18V cordless combo kit, Model# DCK655X, delivers portable power for projects around the house or the jobsite. Includes a hammer drill, circular saw, reciprocating saw, impact driver, cutoff tool and flexible floodlight, plus two 18V XRP® Ni-Cd batteries, charger and accessories.
What's Included
(1) Hammer drill/drill/driver (1) Circular saw (1) Reciprocating saw (1) Impact driver (1) Cutoff tool (1) Floodlight (2) 18V XRP Ni-Cd batteries (1) 1-hour charger (1) Circular saw blade (1) Type 1 guard (1) Side handle (1) Wrench (1) Contractor bag
Features + Benefits
18V cordless hammer drill with 3-speed all-metal transmission and 1/2in. self-tightening chuck delivers 450 watts of maximum performance, faster application speed and superior bit retention
18V circular saw with 6 1/2in. carbide blade and rip fence can cut 2x4s at a 45° angle in a single pass
18V cordless reciprocating saw with keyless blade clamp for quick blade changes without touching blade or reciprocating shaft
18V impact driver with 1330 in.-lbs. of max. torque
18V cutoff tool with 6500 RPM provides high power for cutting and grinding applications
18V flexible floodlight provides hands-free use
Key Specs
Item# 334734
Brand DEWALT
Manufacturer's Warranty 12 months parts / 12 months labor
Ship Weight 42.0 lbs
Volts 18
Battery Type NiCad
Tools Included (qty.) 6
Batteries (qty.) 2
Charger Included Yes
Storage Type Contractor bag
More Information Please Visit our website Official ATLAS DEPOT MACHINERY for catalog, transaction, full Description, Term and Conditions, best product, or special price.
Bon Cabe Original Level 30 40g: Extreme Heat, Unmatched Flavor
For spice lovers seeking the ultimate heat, Bon Cabe Original Level 30 40g is your go-to seasoning. Packed with intense fiery flavors, this sambal powder takes your meals to the next level with its bold spiciness and authentic taste. Whether you're adding it to noodles, snacks, or rice, Bon Cabe Level 30 delivers an electrifying experience that will challenge your taste buds. The convenient 40g pack ensures that you have the perfect amount of heat whenever you need it. Ready for a flavor explosion? Try Bon Cabe Original Level 30 and feel the heat today!
Digunakan sebagai perangkat pelatihan sekaligus alat ukur untuk menjelaskan karakteristik rangkaian dasar listrik.
Daya input: AC380V tiga fasa 50Hz/60Hz
Daya keluaran: AC380V 50Hz/60Hz, AC220V 50Hz/60Hz
Daftar bagian: Meja kerja, Modul transformator satu fasa, Sekering, Modul Rheostat, Modul beban, Modul penyearah,
Modul meter voltase ampere, Kabel Penghubung.
The Rohde & Schwarz FSC6.16 is a high-performance spectrum analyzer with a frequency range of 9 kHz to 6 GHz. It features a built-in tracking generator, making it ideal for testing and troubleshooting RF systems. The FSC6.16 offers exceptional accuracy, sensitivity, and dynamic range, ensuring reliable and precise measurements.
Features and Specifications:
Frequency range: 9 kHz to 6 GHz
Tracking generator: 100 kHz to 6 GHz
Sensitivity: -160 dBm (1 Hz)
Dynamic range: 100 dB
Resolution bandwidth: 1 Hz to 10 MHz
Video bandwidth: 1 Hz to 10 MHz
Display: 10.1-inch color TFT LCD
Interfaces: USB, LAN, GPIB
The Rohde & Schwarz FPL1003 Spectrum Analyzer is a high-performance, portable spectrum analyzer designed for a wide range of applications, including RF testing, EMC measurements, and signal analysis. With its frequency range of 5 kHz to 3 GHz, the FPL1003 is ideal for analyzing signals in the VHF, UHF, and microwave bands.
The Rohde & Schwarz FSC6.06 Spectrum Analyzer is a high-performance instrument designed for demanding applications in the 9 kHz to 6 GHz frequency range. With its exceptional sensitivity, wide dynamic range, and advanced features, it provides accurate and reliable measurements for various industries, including telecommunications, aerospace, and manufacturing.
The Rohde & Schwarz FSC3.13 is a high-performance spectrum analyzer with a built-in tracking generator, providing comprehensive signal analysis and generation capabilities. Its wide frequency range of 9 kHz to 3 GHz makes it ideal for a wide range of applications, including RF design, testing, and troubleshooting.
The Rohde & Schwarz FSC3.03 is a high-performance spectrum analyzer designed for demanding applications in the 9 kHz to 3 GHz frequency range. With its exceptional sensitivity, wide dynamic range, and advanced features, it provides unparalleled insights into signal behavior.
Features and Specifications:
Frequency Range: 9 kHz to 3 GHz
Sensitivity: -160 dBm (1 Hz)
Dynamic Range: >100 dB
Resolution Bandwidth: 1 Hz to 10 MHz
Sweep Speed: Up to 1000 sweeps/s
Display: 10.1-inch color TFT LCD
Interfaces: USB, LAN, GPIB (optional)
Simultaneous detection of up to 6 different gases
Wide variety of field proven gas sensors available
IR Sensors available for CO2 , % LEL CH4 , and 0-100% volume CH4
PPM / LEL hydrocarbon detection
Powerful long-life pump with 125 range
Low flow pump shut off and alarm
Methane elimination switch for environmental use
Accuracy to ±0.015% of Indicated reading Accuracy ±0.025 and 0.050% is also available
Repeateability ±0.005% of indicated reading
Available units psi, g/cm2, mbar, bar, kPa, inH2O,
cmH2O
Special Calibrations/Local Gravity
Gas Industry Models
Floating Ball Operation
Self-Regulating
Rugged Ceramic Measuring Ball
Overhung Weight Carrier
Non-Contaminating Test Fluid
Closed Cover Operation
Ball Valves for Inlet and Outlet
Interchangeable Weights
NIST Traceable
This small calibrator utilizes a built-in pump, state-of-the-art sensor technology, and precision control to generate the desired pressures all with a touch of a button.
Fully automatic calibrator with built-in pump and controller
Switchable internal and external pressure modules for expandable ranges
Accuracy (1 year) of 0.02%FS
Less than 5 lbs for handheld operation
Source pressure, measure pressure, electrical, and temperature
4 channels
HART communications
datalogging and task documentation features
USB, Wifi, and Bluetooth communications
Pressure Range: -12.5 to 36 psi
Stability: <,0.005%FS
Connection: G1/8 BSP F
Pressure Type: Differential, Gauge
Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges, temperature probes and other measuring devices. The calibration data are stored in the instruments memory. The communication with a PC is used to remotely control the unit and to download the calibration reports.
Dual-Range Piston Cylinder System with Automated Range Changing Capability
High Long-Term Stability with Recommended Recalibration Cycle Every Five Years
0.015% Standard Accuracy. 0.006% Premium Accuracy Available
Gives Extremely Good Sensitivity for High Accuracy Calibration and it is Rugged Enough for Regular Use in a Workshop Environment
Factory Standard Calibration Report. Traceability to National Standards Calibration, such as UKAS or
DKD/DAkkS Available.
223 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
