Chassis: Nylon composite construction
Drive: Four wheel with lightweight extruded aluminum shaft
Radio: Traxxas TQ 2.4GHz High Output Traxxas Link with mini receiver
Electronic Speed Control: Traxxas Velineon VXL 3S
Motor: Traxxas Velineon 3500 with ultra high temperature Neodymium magnets and high speed ball bearings Spur Gear: 54 tooth, 0.8 module 32 pitch
Pinion Gear: 13 tooth
Battery: Traxxas Power Cell 8.4V 3000mAh 7-cell with high-current connector
Battery Charger: Body: Painted and trimmed
Bumpers: Front and rear, composite construction
Shocks: Traxxas Ultra oil filled with high-volume body, silicone bladders, dual X-ring seals and progrssive springs Suspension: C-hub design
Transmission: Ball bearing equipped with adjustable Torque-Control slipper clutch with finned aluminum alloy pressure plates
Differentials: Revo-spec sealed silicone filled planetary gear type
Ball Bearings: Rubber sealed
Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Tires: Mud-Terrain, with foam inserts 1.7" (43mm) wide, 4.3" (109mm) diameter
Wheels: Beadlock style split spoke with chrome center and color molded outer rim to simulate beadlock, 12mm hex Steering: Dual bellcrank pivoting on rubber sealed bearings with integrated cam-type servo saver, waterproof digital high- torque (125 oz-in) servo.
INCLUDES: Traxxas Slash 4X4 Short Course Race Truck with 2.4GHz radio system, brushless ESC and motor, body, 7-cell 3000mAh NiMH battery, AC powered charger, decals and illustrated instruction manual.
Chassis: 6061-T6 aluminum, .16" (4mm) thick, blue in color, heavy duty braces
Drive: Four wheel shaft driven with Revo spec driveline including sealed driveshafts, pivot balls and axle carrier
Wheelie Bar: 4 snap-in adjustment positions to control degree of wheelie action, easily removable if additional control isn't needed
Radio: Traxxas TQ 2.4GHz Direct Sequence Spread Spectrum (DSSS) programmable system with Traxxas Link automatic model recognition that allows up to 20 Traxxas Link receivers and transmitters to be bound, transmitter automatically recalls settings for any previously bound receiver
Engine: Traxxas .20 cu in (3.3cc) racing engine w/Slide Valve Carburetor, 12mm diameter IPS crankshaft, high volume dual stage air filter
Starter: EZ-Start electric starting system with Traxxas's exclusive Smart-Start technology that monitors critical starting functions, sensing and diagnosing potential problems for easy starting every time
Battery: Traxxas Power Cell Battery
Charger: AC powered
Exhaust: Maxx Resonator dyno tuned dual chamber polished tuned pipe Brake: Semi metallic, giant 1.6" (42mm) diameter Tires: 6.3" (160mm) outer diameter, 3.8" (96.5mm) inner diameter all terrain
Maxx Wheels: Hurricane chrome wheels 3.8" (96.5mm) diameter, 2.75" (70mm) wide, 14mm hex size
Transmission: Revo-Spec forward only two speed autoshifting with skid plate, optional reverse kit sold separately
Differential: Revo-Spec sealed front and rear
Ball Bearings: Full set, rubber sealed
Fuel Tank: 4.2oz (125cc)
Body: Trimmed and painted
Shocks: Eight oil-filled Ultra with rubber pressure badders and double O-ring seals, up to ten shock mounting positions, nearly 4" (102mm) travel
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Suspension: Sealed pivot ball WideMaxx independent
Steering: Heavy duty bellcrank steering with integrated servo saver
Skid Plates: Heavy-duty plastic, front and rear.
Includes: New T-Maxx RTR 3.3 truck, TRX 3.3 engine, EZ Start electric starter, EZ Start battery, charger, fuel bottle, extra glow plug, metric hex hardware, air filter, two decal sheets setup DVD, antenna tube, painted body, illustrated instruction manual and 2.4GHz radio system.
FEATURES:
Chassis: 0.08" (2mm) thick FRP main frame with duralumin plate for added strenth and flexibility
Drive: Rear wheel
Motor: 540 type
Electronic Speed Control: Tamiya TEU-104BK with reverse
Transmission: Single-speed
Gearbox: Transparent plastic, fully enclosed, die cast metal and clear resin components
Body: Polystyrene, trimmed and molded in white
Bumper: Front reinforced resin with integrated metal bars
Shocks: Oil filled
Ball Bearings: Full set
Tires: Front ribbed 2.7" (69mm) diameter, 0.71" (18mm) wide
Rear paddle 3.1" (79.5mm) diameter, 1.6" (40mm) wide
Wheels: Three-piece center lock, molded in white
Suspension: Front double trailing arm, die cast front and rear arms and metal uprights, swing axle rear suspension with metal torsion bars
Camber: Non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Steering: Bellcrank type with servo saver.
Wayang kulit is probably the most famous and imaginative form of indonesian art. Finely carved and painted thin leather puppets move behind a white linnen screen, such that the audience on the other side of the screen sees the shadows only.
Kulit means leather. Thick and specifically treated water buffalo leather is manually cut out, engraved, ciseled with amazing detail and finally hand-painted. Movable limbs are joined with leather bolts and even the handles are made from the long horns of the same water buffaloes.
We are working directly with artists and manufacturers of products made from natural materials in traditional workmanship. We only deal with genuine and high quality items.
Per 12 pieces per shipment
Each piece is about 30-40cm" and about usd $65
1875 Personal And Entertainment Suppliers
Short on time? Let Personal And Entertainment sellers contact you.
Align T-REX 600 Nitro Pro 50size RC Helicopter Super Plus Version
1.Both the T-Rex 600 Nitro and 600 Nitro Pro include a Beautiful factory painted fiberglass canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3.+-14? collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Torque Tube driven tail for incredible 50 sized performance.
13.Rigid frame design that can also handle hard crashes without damage.
14.Carbon Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New flybar paddles feature light weight and sports.
21.New flybar control set design.
22.New tail boom supports.
Model
- T-REX 600 Nitro Pro?50size RC Helicopter
- T-rex 600 Nitro Pro Landing Skid
- T-rex 600 Nitro Pro Canopy
- T-rex 600 Nitro Pro Manual
Motor
- OS Engine 50SX-H Ring Hyper Heli Engine
- Glow Plug for 600 N
ESC
- B6T 2 In 1 Voltage Regulator HE50H10
Servos
- Futaba BLS251 Digital Servo
- Futaba S9155 Servo x 3
- Futaba S3152 Servo
Gyro
- Futaba GY611 SMM Rate Gyro
Radio
- Futaba 9C Super Transmitter
- Futaba PCM R149DP 9CH Receiver
Battery & Charger
- 600 Carbon Night Blade Charger H60130
Bonus Parts
- Fuel tank HN6009
- 600N Fiberglass Canopy HN6035
- Mavrikk PRO Series Carbon Fiber 600mm Main Blades
- Trex600 EL Flashing Sticker
- 50 High Performance Muffler HE50H08
- 600 Carbon Fiber Night Blades/3K H60131
- Flying Cap BG61548
- Main Blade Holder/New (H60145)
- Radio Sling KX150006
- Flying T-shirt (White) BG61557
- Trex600 EL Flashing Sticker with tail boom
Metal Parts
- Align Metal Main Rotor Holder
- Align Metal Flybar Seesaw Holder
- Metal Tail Control Arm (HN6038)
- Align Metal Tail Pitch Assembly
- Metal Aileron Lever
- Metal Engine Fan
- Align Metal SF Mixing Arm
- Metal Elevator Lever
Drone Volt Hercules 10
Maximum Transmission Distance FCC Compliant: 2.17 miles (3.5 km)
Hovering Accuracy Vertical: ±1.5' (0.5 m)
Horizontal: ±0.75' (0.22 m)
Maximum Speed 33 mph (53 km/h)
Maximum Wind Resistance 27 mph (43.5 km/h)
Battery 2 x 6S (16,000 mAh)
Flight Time With No Payload: 45 minutes
Propeller Type 15.5 x 5.3
Motors 8 x T-motor by DRONE VOLT 4014 - 9
Software Pixhawk
Maximum Capacity 22 lb (10 kg)
Length M2M: 35.4" (900 mm)
Dimensions With Propellers: 27.6 x 27.6" (700 x 700 mm)
Weight With Propellers: 9.9 lb (4.5 kg)
Particularly knit handicraft such as knit cushion cover, knit tablecloth and knit tissue box cover.
If you are looking to import those above for your retail business or hospitality projects from a reliable B2B supplier from Bali, Java, Sumatera and other cities in Indonesia, we are ready to give you the best products, and serve you at a reasonable yet very competitive price which bring us as one of the best institution for shopping handicraft.
We prioritize every quality control of our products. Since it is a very important part of the buying process, especially when buying goods from overseas.
We handle it all with care because we are aware of the importance of quality control for all goods to be checked before being sent to you.
Giving you peace of mind that your order is correct, ready and to the quality level you require.
Buy DJI Mavic 3 Quadcopter Drone Fly More Combo W/Camera, Transmitter, Battery & Charger�» from REALWORLDHOBBY Online Store one of the world's leading online retailers for a wide selection of RC Planes, RC Helicopters, Drones, Cars / Trucks RC, RC Boat, and RC Rock Crawler.
Price : $1,500.00
Payment Options : PayPal, Bank Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International, and Xoom
Shipping Service: FedEx/UPS/DHL
Delivery Time : 5 - 7 Days
Address : FX Sudirman - Jl. General Sudirman, Gelora - Kab. Tanah Abang, Jakarta 10270
Email Orders : order@realworldhobby.com
Whatsapp/Call : +6283159484758
Description Product
Mavic 3 from DJI offers photographers and videographers a unique feature that historically has been incredibly difficult to achieve; two camera types equipped on one drone and gimbal system. The wide angle camera features 20MP, and a 4/3" CMOS sensor from Hasselblad, as well as a 12MP telephoto camera equipped with a 1/2" CMOS sensor, up to 4k video, and 28x hybrid zoom.
